Novel design of a 6-DOF planar Maglev positioning system

被引：3
|
作者：
Chen, MY [1 ]
Lin, TB [1 ]
Shiu, MC [1 ]
Fu, LC [1 ]
机构：
[1] Natl Taiwan Univ, Dept Elect Engn, Taipei 10764, Taiwan
来源：
PROCEEDINGS OF THE 2003 IEEE/ASME INTERNATIONAL CONFERENCE ON ADVANCED INTELLIGENT MECHATRONICS (AIM 2003), VOLS 1 AND 2 | 2003年
关键词：
Maglev; precision positioning; adaptive controller;
D O I：
10.1109/AIM.2003.1225110
中图分类号：
TP24 [机器人技术];
学科分类号：
080202 ; 1405 ;
摘要：
A novel 6-DOF magnetic levitation (Maglev) system is proposed in this paper. In this system, both new structure and adaptive control algorithm are developed. Three objectives we attempt to achieve simultaneously include large moving range, accurate positioning, and fast response. Structurally, totally there are six permanent magnets (PMs) attached on the carrier, while six coils mounted on a fixed part. By analyzing the magnetic force characteristics between permanent magnets and coils, the general model of this system with full DOFs is therefore derived and analyzed. Then, due to the naturally unstable behavior and uncertainties of the Maglev systems, an adaptive controller is proposed to guarantee the stabilities of all DOFs both in regulation and tracking. From the experimental results, satisfactory good performances including stiffness and precision have been demonstrated.
引用
收藏
页码：290 / 295
页数：6
相关论文
共 50 条
  • [31] Error compensation and feedforward controller design for a 6-dof micro-positioning platform
    Ting, Y
    Jar, HC
    Li, CC
    2005 IEEE/RSJ International Conference on Intelligent Robots and Systems, Vols 1-4, 2005, : 766 - 771
  • [32] Design of a novel 6-DoF robotic system for pituitary tumor removal under MRI guidance
    Farooq, Muhammad Umar
    Cha, Kyoungrae
    Sohn, Dae Kyung
    Yoo, Heon
    Ko, Seong Young
    2019 19TH INTERNATIONAL CONFERENCE ON CONTROL, AUTOMATION AND SYSTEMS (ICCAS 2019), 2019, : 456 - 459
  • [33] Novel Design of a 3-RRUU 6-DOF Parallel Manipulator
    Yang, Zhongxing
    Zhang, Dan
    IOP Conference Series: Materials Science and Engineering, 2019, 491 (01)
  • [34] Inverse Kinematics and Design of a Novel 6-DoF Handheld Robot Arm
    Gregg-Smith, Austin
    Mayol-Cuevas, Walterio W.
    2016 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION (ICRA), 2016, : 2102 - 2109
  • [35] Novel Design of a 3-RRUU 6-DOF Parallel Manipulator
    Yang, Zhongxing
    Zhang, Dan
    4TH INTERNATIONAL CONFERENCE ON MECHANICAL AND AERONAUTICAL ENGINEERING (ICMAE 2018), 2019, 491
  • [36] Design and Analysis of the Controller for Novel 6-DOF Magnetic Suspension Platform
    Meng, Yulu
    Meng, Yl M.
    Niu, Pingjuan
    Niu, Pjn
    Cao, Shinan
    Cao, Cao Sn
    Bai, Jie
    Bai, J. B.
    2022 5TH INTERNATIONAL CONFERENCE ON ELECTRONICS AND ELECTRICAL ENGINEERING TECHNOLOGY, EEET, 2022, : 216 - 220
  • [37] Design of a novel parallel monolithic 6-DOF compliant micromanipulation mechanism
    Ghafarian, Mohammadali
    Shirinzadeh, Bijan
    Das, Tilok Kumar
    Al-Jodah, Ammar
    Wei, Weichen
    2018 IEEE/ASME INTERNATIONAL CONFERENCE ON ADVANCED INTELLIGENT MECHATRONICS (AIM), 2018, : 997 - 1002
  • [38] Dynamics analysis for a novel 6-DoF parallel manipulator I with three planar limbs
    Lu, Y.
    Li, X. P.
    ADVANCED ROBOTICS, 2014, 28 (16) : 1121 - 1132
  • [39] Triple Scissor Extender: A 6-DOF Lifting and Positioning Robot
    Gonzalez, Daniel J.
    Asada, H. Harry
    2016 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION (ICRA), 2016, : 847 - 853
  • [40] Nonlinear PID controller design for a 6-DOF UAV quadrotor system
    Najm, Aws Abdulsalam
    Ibraheem, Ibraheem Kasim
    ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH, 2019, 22 (04): : 1087 - 1097
12345