Influence of the groove design of wet clutch discs on the flow within the clearance

被引：0

作者：

Neupert, Thomas ^{[1
]}

Bartel, Dirk ^{[1
]}

机构：

[1] Otto von Guericke Univ, Lehrstuhl Maschinenelemente & Tribol, Inst Maschinenkonstrukt, Magdeburg, Germany

来源：

KUPPLUNGEN UND KUPPLUNGSSYSTEME IN ANTRIEBEN 2017/ SCHWINGUNGSREDUZIERUNG IN MOBILEN SYSTEMEN 2017 | 2017年 / 2309卷

关键词：

MODEL;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The paper addresses the experimental and numerical analysis of the drag torque of a radial grooved wet clutch disc. For this investigation certain geometry parameters e.g. groove width, groove angle or number of grooves are varied. In order to carry out the required measurements and to identify the dependencies of the drag torque a further developed single disc test rig is used. The causes for the flow influence of each groove parameter is discussed and for certain operating parameters the measurements are compared with the results of a validated 3D - CFD calculation model.

引用

页码：135 / 145

页数：11

共 50 条

[21] Influence of Clutch Output Shaft Inertia and Stiffness on the Performance of the Wet Clutch
Fatima, Nowshir
Marklund, Par
Larsson, Roland
TRIBOLOGY TRANSACTIONS, 2013, 56 (02) : 310 - 319
[22] Amelioration and Finite Element Analysis for Oil Groove of a Wet Clutch Friction Disk
Liu, Jingang
Zheng, Shaoqing
Li, Quan
Zhou, Yunshan
PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ELECTRONIC & MECHANICAL ENGINEERING AND INFORMATION TECHNOLOGY (EMEIT-2012), 2012, 23
[23] Design and Entity Modeling of Wet Double Clutch
Guo, Xiaolin
Pan, Jiaping
Sun, Wei
Chen, Gan
MECHATRONICS AND INTELLIGENT MATERIALS II, PTS 1-6, 2012, 490-495 : 2409 - 2413
[24] Statistical Modeling of Plate Clearance Distribution for Wet Clutch Drag Analysis
Wang, Pengchuan
Katopodes, Nikolaos
Fujii, Yuji
SAE INTERNATIONAL JOURNAL OF PASSENGER CARS-MECHANICAL SYSTEMS, 2018, 11 (01): : 76 - 88
[25] Thermal-structural Coupling Analysis of Wet Clutch Friction Discs Based on APDL
Xie Xiaozeng
Qu Dongyue
Liu Fanbing
Wang Qingyu
PROCEEDINGS OF 8TH INTERNATIONAL CONFERENCE ON INTELLIGENT COMPUTATION TECHNOLOGY AND AUTOMATION (ICICTA 2015), 2015, : 1059 - 1062
[26] Parametric analysis of wear factors of a wet clutch friction material with different groove patterns
Li, M.
Khonsari, M. M.
McCarthy, D. M. C.
Lundin, Joakim
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2017, 231 (08) : 1056 - 1067
[27] Theoretical optimization of non-dimensional geometric parameter of wet multiple discs clutch and brake
Zhang, Yunlong
Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery, 1995, 26 (02):
[28] Research on friction disk surface oil groove configuration and temperature raise in wet friction clutch
Jia, Yun-Hai
Zhang, Wen-Ming
2007, Xi'an Highway University, Southern Middle Section of the Second Circular Road, Xi'an, 710064, China (20):
[29] Optimization Design of Oil Groove Shape on the Surface of Friction Plate in High-Speed Wet Clutch Aimed at Minimizing Drag Torque
Zhang, Lin
Zhang, Yuansheng
Wei, Chao
Yan, Yunbing
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2024, 146 (03):
[30] Simulation of the Flow in wet-running Multiple Disk Clutch
Rudloff, Madlen
Bartel, Dirk
Deters, Ludger
VDI-FACHTAGUNG KUPPLUNGEN UND KUPPLUNGSSYSTEME IN ANTRIEBEN MIT FACHAUSSTELLUNG, 2011, 2139 : 177 - 186

← 1 2 3 4 5 →