On the origin of dynamic strain aging in twinning-induced plasticity steels

被引:321
|
作者
Lee, Seok-Jae [1 ]
Kim, Jinkyung [1 ]
Kane, Shashank N. [2 ]
De Cooman, Bruno Charles [1 ]
机构
[1] Pohang Univ Sci & Technol, Mat Design Lab, Grad Inst Ferrous Technol, Pohang 790784, South Korea
[2] Devi Ahilya Univ, Sch Phys, Indore 452017, Madhya Pradesh, India
基金
新加坡国家研究基金会;
关键词
Dynamic strain aging; Point defect complexes; C-Mn reorientation; Internal friction; HADFIELD MANGANESE STEEL; IRON-CARBON MARTENSITE; INTERNAL-FRICTION; SOLID-SOLUTIONS; AUSTENITIC STEELS; RATE SENSITIVITY; MOSSBAUER; ALLOYS; DEFORMATION; NITROGEN;
D O I
10.1016/j.actamat.2011.07.040
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Room temperature dynamic strain aging (DSA) is often observed from the beginning of plastic deformation in high Mn Fe 18% Mn-0.6% C and Fe-22% Mn-0.6% C twinning-induced plasticitysteels. Although the phenomenon is in many cases very pronounced, there have up to now been no attempts to explain the phenomenon of room temperature DSA in TWIP steel containing solute C. It is proposed that DSA occurs by a single diffusive jump of the C atom of the point defect complex in the stacking fault region. DSA is only observed when the C atom reorientation time is smaller than the residence time of the stacking fault at the location of the point defect complex. The latter interaction can explain the DSA-suppressing effect of Al, which increases the stacking fault energy. (C) 2011 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:6809 / 6819
页数:11
相关论文
共 50 条
  • [41] Hydrogen embrittlement of twinning-induced plasticity steels: Contribution of segregation to twin boundaries
    Khanchandani, Heena
    Rolli, Rolf
    Schneider, Hans-Christian
    Kirchlechner, Christoph
    Gault, Baptiste
    SCRIPTA MATERIALIA, 2023, 225
  • [42] Revealing the small post-necking elongation in twinning-induced plasticity steels
    Joong-Ki Hwang
    Journal of Materials Science, 2020, 55 : 8285 - 8302
  • [43] Effect of grain size on stretch-flangeability of twinning-induced plasticity steels
    Yoon, Jae Ik
    Lee, Hak Hyeon
    Jung, Jaimyun
    Kim, Hyoung Seop
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 735 : 295 - 301
  • [44] On the Mechanisms of Different Work-Hardening Stages in Twinning-Induced Plasticity Steels
    Zhou, Peng
    Huang, Ming Xin
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (11): : 5080 - 5090
  • [45] On the Mechanisms of Different Work-Hardening Stages in Twinning-Induced Plasticity Steels
    Peng Zhou
    Ming Xin Huang
    Metallurgical and Materials Transactions A, 2015, 46 : 5080 - 5090
  • [46] Effect of Aluminum and Grain Size on the Fracture Behavior of Twinning-Induced Plasticity Steels
    Luo, Z. C.
    Huang, M. X.
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2018, 49 (05): : 2145 - 2151
  • [47] Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels
    Bouaziz, O.
    Allain, S.
    Scott, C.
    SCRIPTA MATERIALIA, 2008, 58 (06) : 484 - 487
  • [48] On the applicability of recovery-annealed Twinning-Induced Plasticity steels: Potential and limitations
    Haase, Christian
    Ingendahl, Tobias
    Guevenc, Onur
    Bambach, Markus
    Bleck, Wolfgang
    Molodov, Dmitri A.
    Barrales-Mora, Luis A.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 649 : 74 - 84
  • [49] Hydrogen embrittlement in multilayer steel consisting of martensitic and twinning-induced plasticity steels
    Shin, S. E.
    Lee, S. -J.
    Narnbu, S.
    Koseki, T.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 756 : 508 - 517
  • [50] HIGH-Mn TWINNING-INDUCED PLASTICITY STEELS: MICROSTRUCTURE AND MECHANICAL PROPERTIES
    Kusakin, P. S.
    Kaibyshev, R. O.
    REVIEWS ON ADVANCED MATERIALS SCIENCE, 2016, 44 (04) : 326 - 360