Quinary icosahedral quasicrystalline Ti-V-Ni-Mn-Cr alloy: A novel anode material for Ni-MH rechargeable batteries

被引：13

作者：

Hu, Wen ^{[1
,2
]}

Wang, Lidong ^{[1
]}

Wang, Limin ^{[1
]}

机构：

[1] CAS, Changchun Inst Appl Chem, State Key Lab Rare Earth Resources Utilizat, Changchun 130022, Peoples R China

[2] Chinese Acad Sci, Grad Univ, Beijing 100049, Peoples R China

来源：

MATERIALS LETTERS | 2011年 / 65卷 / 19-20期

基金：

中国国家自然科学基金;

关键词：

Ti-V-Ni-Mn-Cr alloy; Icosahedral quasicrystalline phase; Electrochemical hydrogen storage; Electrocatalytic activity; HYDROGEN STORAGE ALLOYS; ELECTROCHEMICAL PROPERTIES; PHASE-FORMATION; ZR; APPROXIMANTS; SYMMETRY;

D O I：

10.1016/j.matlet.2011.06.059

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The substitution of manganese and chromium for 6 at.% nickel in Ti(1.6)V(0.4)Ni leads the rapid quenching synthesis of quinary icosahedral phase (i-phase) evidenced by the observations of 2-. 3- and 5-fold symmetries. As negative electrode in Ni-MH battery, the quinary Ti-V-Ni-Mn-Cr i-phase can deliver a maximum discharge capacity of 278 mAh g(-1) at 30 mA g(-1) larger than that of Ti(1.6)V(0.4)Ni master alloy anode owing to Mn and/or Cr doping. After a preliminary test of 30 consecutive cycles the cycling capacity retention rate (CR%) is 80%. The strong chemisorption of hydrogen shown in cyclic voltammetric (CV) response indicates that the electrocatalytic activity improvement for the i-phase negative electrode is highly demanded. (C) 2011 Elsevier B.V. All rights reserved.

引用

页码：2868 / 2871

页数：4

共 50 条

[21] Non-alloy Mg anode for Ni-MH batteries: Multiple approaches towards a stable cycling performance
Xu, Yaolin
Mulder, Fokko M.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2021, 46 (37) : 19542 - 19553
[22] Effects of the ball-milling with LmNi4.1Al0.25Mn0.3Co0.65 alloy on the electrode characteristics of Ti0.32Cr0.43V0.25 alloy for Ni-MH batteries
Park, Jun-Young
Park, Choong-Nyeon
Park, Chan-Jin
Choi, Jeon
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2007, 32 (17) : 4215 - 4219
[23] Determination of internal cell pressures in sealed Ni-MH rechargeable batteries using Zr0.9Ti0.1(Mn0.7V0.5Ni1.2)0.92 hydrogen-storage alloys
Kim, DM
Lee, H
Jang, KJ
Lee, JY
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1998, 145 (10) : 3387 - 3391
[24] On the development of AB4.9-Type alloys (A=Mm,La,Ti; B=ni, Co,Al,Mn,Mo) for Ni-MH batteries
Davidson, D.J.
Srivastava, S.
Sai Raman, S.S.
Shukla, P.K.
Srivastava, O.N.
Transactions of the SAEST (Society for Advancement of Electrochemical Science and Technology), 2001, 36 (1-2): : 59 - 63
[25] Study of electrochemical performances of perovskite-type oxide LaGaO3 for application as a novel anode material for Ni-MH secondary batteries
Kaabi, A.
Tliha, M.
Dhahri, A.
Khaldi, C.
Lamloumi, J.
CERAMICS INTERNATIONAL, 2016, 42 (10) : 11682 - 11686
[26] Effect of Cu powder as an additive material on the inner pressure of a sealed-type Ni-MH rechargeable battery using a Zr-based alloy as an anode
Kim, DM
Lee, H
Cho, K
Lee, JY
JOURNAL OF ALLOYS AND COMPOUNDS, 1999, 282 (1-2) : 261 - 267
[27] Effect of temperature on behavior of perovskite-type oxide LaGaO3 used as a novel anode material for Ni-MH secondary batteries
Kaabi, Abbes
Tliha, Mohamed
Dhahri, Abdessalem
Khaldi, Chokri
Fenineche, Nouredine
Elkedim, Omar
Lamlouli, Jilani
INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 2018, 42 (09) : 2953 - 2960
[28] Ti1.4V0.6Ni quasicrystal and its composites with xV18Ti15Zr18Ni29Cr5Co7Mn alloy used as negative electrode materials for the nickel-metal hydride (Ni-MH) secondary batteries
Liu, Wanqiang
Zhang, ShanShan
Wang, Limin
MATERIALS LETTERS, 2012, 79 : 122 - 124
[29] Development of AB2-Type Zr-Ti-Mn-V-Ni-M hydride electrode for Ni-MH secondary battery
Song, MY
Ahn, D
Kwon, IH
Chough, SH
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2001, 148 (09) : A1041 - A1044
[30] Low Temperature Characteristics of Hydrogen Storage Alloy LaMm-Ni4.1Al0.3Mn0.4Co0.45 for Ni-MH Batteries
Karwowska, Malgorzata
Fijalkowski, Karol J.
Czerwinski, Andrzej A.
MATERIALS, 2019, 12 (24)

← 1 2 3 4 5 →