Microstructures and toughness in simulated coarse grain heat-affected zones of copper-bearing steel

被引：0
|
作者：
Liu, Wenyan [1 ,2 ]
Wang, Lai [1 ]
Liu, Jibin [2 ]
Li, Pinghe [2 ]
Miao, Kai [2 ]
Han, Rongdong [2 ]
机构：
[1] Dalian Univ Technol, Sch Mat Sci & Engn, Dalian, Peoples R China
[2] Wuhan Iron & Steel Univ, Res & Dev Ctr, Wuhan, Peoples R China
来源：
PHYSICAL AND NUMERICAL SIMULATION OF MATERIALS PROCESSING, PTS 1 AND 2 | 2008年 / 575-578卷
关键词：
copper-bearing steel; coarse grain heat-affected zone; granular bainite; M-A constituents;
D O I：
10.4028/www.scientific.net/MSF.575-578.910
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Microstructures and toughness of simulated coarse grain heat-affected zone of hot continuously rolled copper-bearing steel were investigated using physical simulation. The results showed that brittlement is easy to happen in the region of CGHAZ with slower thermal cycles (t(8/5)>= 45s). Granular bainite transformed from austenite led to brittlement. The dimensions of granular martensite and austenite (M-A) constituents are main factors influencing the impact toughness. There is no visible effect on the toughness when the dimensions of M-A constituents are less than I p in. However, the toughness decreases greatly once the dimensions exceed I P in. Therefore, decreasing the dimensions of M-A constituents by controlling weld heat input will do good to improve the impact toughness of copper-bearing steel.
引用
收藏
页码：910 / +
页数：2
相关论文
共 50 条
  • [21] Micromechanism of Decrease of Impact Toughness in Coarse-Grain Heat-Affected Zone of HSLA Steel with Increasing Welding Heat Input
    Cao, R.
    Li, J.
    Liu, D. S.
    Ma, J. Y.
    Chen, J. H.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (07): : 2999 - 3014
  • [22] Low-temperature toughness properties of 500 MPa offshore steels and their simulated coarse-grained heat-affected zones
    Tervo, H.
    Kaijalainen, A.
    Pallaspuro, S.
    Anttila, S.
    Mehtonen, S.
    Porter, D.
    Komi, J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 773 (773):
  • [23] FRACTURE TOUGHNESS IN HEAT-AFFECTED ZONES OF A CARBON MANGANESE STEEL AND A LOW ALLOY-STEEL
    ARCHER, GL
    METAL CONSTRUCTION AND BRITISH WELDING JOURNAL, 1974, 6 (12): : 369 - 374
  • [24] Research on influencing factor of impact toughness in coarse grain heat-affected zone for X80 pipeline steel
    Chen, C.-X., 2005, Beijing Institute of Aeronautical Materials (BIAM)
  • [25] PROCEDURES FOR EVALUATION OF FRACTURE TOUGHNESS OF HEAT-AFFECTED ZONES
    MCGEADY, LJ
    WELDING JOURNAL, 1972, 51 (12) : S569 - &
  • [26] Effect of Heat Input on Cleavage Crack Initiation of Simulated Coarse Grain Heat-affected Zone in Microalloyed Offshore Platform Steel
    Lu, Feng
    Cheng, Guang-ping
    Chai, Feng
    Pan, Tao
    Shi, Zhong-ran
    Su, Hang
    Yang, Cai-fu
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2016, 23 (10) : 1086 - 1095
  • [27] Effect of Heat Input on Cleavage Crack Initiation of Simulated Coarse Grain Heat-affected Zone in Microalloyed Offshore Platform Steel
    Feng Lu
    Guang-ping Cheng
    Feng Chai
    Tao Pan
    Zhong-ran Shi
    Hang Su
    Cai-fu Yang
    Journal of Iron and Steel Research International, 2016, 23 : 1086 - 1095
  • [28] Effect of Heat Input on Cleavage Crack Initiation of Simulated Coarse Grain Heat-affected Zone in Microalloyed Offshore Platform Steel
    Feng LU
    Guang-ping CHENG
    Feng CHAI
    Tao PAN
    Zhong-ran SHI
    Hang SU
    Cai-fu YANG
    JournalofIronandSteelResearch(International), 2016, 23 (10) : 1086 - 1095
  • [29] Quantitative analysis of microstructure and impact toughness in the simulated coarse-grained heat-affected zone of Cu-bearing steels
    Liu, Y.
    Li, G. Q.
    Wan, X. L.
    Gang, H.
    Wu, K. M.
    Zhang, X.
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2019, 26 (24) : 2030 - 2039
  • [30] Effect of Heat Input on M-A Constituent and Toughness of Coarse Grain Heat-Affected Zone in an X100 Pipeline Steel
    Wang, Xiao-Nan
    Zhao, Yan-Jun
    Guo, Peng-Fei
    Qi, Xiao-Nan
    Di, Hong-Shuang
    Zhang, Min
    Chen, Chang-Jun
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (03) : 1810 - 1821
12345