Synergistic effects of hybrid polypropylene and steel fibers on explosive spalling prevention of ultra-high performance concrete at elevated temperature

被引:184
|
作者
Li, Ye [1 ]
Tan, Kang Hai [1 ]
Yang, En-Hua [1 ]
机构
[1] Nanyang Technol Univ, Sch Civil & Environm Engn, Singapore 639798, Singapore
来源
关键词
Explosive spalling; Ultra-high performance concrete (UHPC); Permeability; Elevated temperature; HIGH-STRENGTH CONCRETE; INTERFACIAL TRANSITION ZONE; PORE PRESSURE; PERMEABILITY; BEHAVIOR; DIFFUSIVITY; HPC;
D O I
10.1016/j.cemconcomp.2018.11.009
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This study investigated synergetic effects of hybrid polypropylene (PP) and steel fibers on explosive spalling prevention of ultra-high performance concrete (UHPC) at elevated temperature. Permeability of UHPC was measured and correlated to the extent of spalling quantitatively. Microstructures of UHPC before and after elevated temperature exposure were examined to reveal potential mechanisms responsible for changes in permeability. Results showed that the use of hybrid PP and steel fibers completely prevented explosive spalling even at low fiber dosage of both fibers due to significant increase of permeability. Microstructural analysis revealed that such synergistic effect on increased permeability of hybrid PP and steel fiber-reinforced UHPC was attributed to enhanced connectivity of empty PP fiber tunnels by multiple microcracks generated from the thermal expansion of both fibers.
引用
收藏
页码:174 / 181
页数:8
相关论文
共 50 条
  • [41] Effects of geometry and fraction of polypropylene fibers on permeability of ultra-high performance concrete after heat exposure
    Li, Ye
    Zhang, Yao
    Yang, En-Hua
    Tan, Kang Hai
    CEMENT AND CONCRETE RESEARCH, 2019, 116 : 168 - 178
  • [42] Properties and improvement of ultra-high performance concrete with coarse aggregates and polypropylene fibers after high-temperature damage
    Qian, Yunfeng
    Yang, Dingyi
    Xia, Yanghao
    Gao, Han
    Ma, Zhiming
    CONSTRUCTION AND BUILDING MATERIALS, 2023, 364
  • [43] Combined curing as a novel approach to improve resistance of ultra-high performance concrete to explosive spalling under high temperature and its mechanical properties
    Peng, Gai-Fei
    Niu, Xu-Jing
    Shang, Ya-Jie
    Zhang, Deng-Ping
    Chen, Xi-Wang
    Ding, Hong
    CEMENT AND CONCRETE RESEARCH, 2018, 109 : 147 - 158
  • [44] A close look at fire-induced explosive spalling of ultra-high performance concrete: from materials to structures
    Liu, Jin-Cheng
    Du, Lin-Pu
    Yao, Yao
    Beaucour, Anne-Lise
    Wang, Jing-Quan
    Zhao, Xin-Yu
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2024, 24 (02)
  • [45] The Mechanism of Explosive Spalling and Measures to Resistant Spalling of Concrete Exposed to High Temperature by Incorporating Fibers: a Review
    Yang, Juan
    Peng, Gaifei
    ADVANCES IN BUILDING MATERIALS, PTS 1-3, 2011, 168-170 : 773 - 777
  • [46] Slip hardening behavior of bundled steel fibers in ultra-high performance concrete
    Dahal, Mandip
    Wille, Kay
    CEMENT & CONCRETE COMPOSITES, 2025, 155
  • [47] Knowledge-enhanced data-driven models for quantifying the effectiveness of PP fibers in spalling prevention of ultra-high performance concrete
    Liu, Jin-Cheng
    Huang, Le
    Tian, Zushi
    Ye, Hailong
    CONSTRUCTION AND BUILDING MATERIALS, 2021, 299
  • [48] Knowledge-enhanced data-driven models for quantifying the effectiveness of PP fibers in spalling prevention of ultra-high performance concrete
    Liu, Jin-Cheng
    Huang, Le
    Tian, Zushi
    Ye, Hailong
    Construction and Building Materials, 2021, 299
  • [49] Dynamic fracture investigations of ultra-high performance concrete by spalling tests
    Khosravani, Mohammad Reza
    Wagner, Peter
    Froehlich, Dirk
    Weinberg, Kerstin
    ENGINEERING STRUCTURES, 2019, 201
  • [50] Tensile behavior of ultra-high performance concrete reinforced with different hybrid fibers
    Li, Jiayue
    Deng, Zongcai
    STRUCTURAL CONCRETE, 2023, 24 (01) : 1415 - 1435