Membrane electrolysis of Bunsen reaction in the iodine-sulphur process for hydrogen production

In traditional IS process for production of hydrogen by water decomposition, the Bunsen reaction (SO2 + I-2 + 2H(2)O -> H2SO4 + 2HI) was carried out by direct contact of SO2 with aqueous solution of I-2 where a large excess of I-2 (8 mol) and H2O (16 mol) were required. Excess amounts of these chemicals severely affected the overall thermal efficiency of the process and new ways including membrane electrolysis was reported in literature for carrying out Bunsen reaction where the amount of excess chemicals can be greatly reduced. We have carried out Bunsen reaction in a two-compartment membrane electrolysis cell containing graphite electrodes and Nafion 117 membrane as a separator between the two-compartments. Electrolysis was carried out at room temperature with continuous recirculation of anolyte and catholyte. Electrolysis was done in constant-current mode with current density in the range of 1.6 A/dm(2) to 4.8 A/dm(2). Initial concentrations of H2SO4 and HI were about 10 and 5 N, respectively and I-2/HI molar ratio in the catholyte was varied in the range of 0.25-1.5. Current efficiency was found to be close to 100% indicating absence of any side reaction at the electrodes. Cell voltage was found to vary linearly with current densities up to 80 A/dm(2) and for I-2/HI molar ratio in the range of 0.25-1.5 the cell voltage was found to be lowest for the value of 0.5. Copyright (C) 2011, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.