Ageing effect on the properties of CuCrZr alloy used for the ITER HHF components

被引：31
|
作者：
Kalinin, G. M.
Ivanov, A. D.
Obushev, A. N.
Rodchenkov, B. S.
Rodin, M. E.
Strebkov, Y. S.
机构：
[1] Engn Ctr Nucl Equipment Strength ENES, Moscow 10100, Russia
[2] Res & Dev Inst Power Engn RDIPE, Moscow 10100, Russia
来源：
JOURNAL OF NUCLEAR MATERIALS | 2007年 / 367卷
关键词：
D O I：
10.1016/j.jnucmat.2007.03.256
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The tensile properties and structure changes due to various heat treatments of CuCrZr alloy with the composition specified for high heat flux components of ITER have been measured. The material was solution annealed at 970-1000 degrees C for 0.5-1 h and water quenched. The ageing temperatures were 350-650 degrees C and ageing times 1-180 min. Temperature-time diagrams of properties changes have been plotted. This gives guidelines for the selection of manufacturing heat treatments and prediction of the strength and ductility of CuCrZr alloy after applied manufacturing cycles. The effects of secondary heat treatment have also been studied. After first ageing at 480 degrees C for 2 h, an additional heat treatment at 650-750 degrees C was applied. The tensile properties after the applied heat treatments are presented. (C) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码：920 / 924
页数：5
相关论文
共 50 条
  • [31] The effect of pre-ageing on the microstructure and properties of 7050 alloy
    Yuan Liu
    Wenjun Li
    Daming Jiang
    Journal of Materials Research, 2015, 30 : 3803 - 3810
  • [32] The effect of pre-ageing on the microstructure and properties of 7050 alloy
    Liu, Yuan
    Li, Wenjun
    Jiang, Daming
    JOURNAL OF MATERIALS RESEARCH, 2015, 30 (24) : 3803 - 3810
  • [33] The effect of multistage ageing on microstructure and mechanical properties of 7050 alloy
    Liu, Y.
    Jiang, D. M.
    Li, W. J.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 671 : 408 - 418
  • [34] Effect of heat treatments on the properties of CuCrZr alloys
    Ivanov, AD
    Nikolaev, AK
    Kalinin, GM
    Rodin, ME
    JOURNAL OF NUCLEAR MATERIALS, 2002, 307 : 673 - 676
  • [35] EFFECT OF QUASI-HYDROSTATIC EXTRUSION ON MICROHARDNESS IN CuCrZr ALLOY
    Belyaeva, A. I.
    Galuza, A. A.
    Khaimovich, P. A.
    Kolenov, I. V.
    Savchenko, A. A.
    Ryzhkov, I. V.
    Shtan, A. F.
    Solodovchenko, S. I.
    Shulgin, N. A.
    PROBLEMS OF ATOMIC SCIENCE AND TECHNOLOGY, 2015, (01): : 170 - 173
  • [36] Tensile Properties of CuCrZr Tube during Mass Production for the ITER Divertor Outer Vertical Target
    Seki, Yohji
    Fukuda, Makoto
    Sakurai, Takeru
    Ezato, Koichiro
    PLASMA AND FUSION RESEARCH, 2022, 17
  • [37] Tensile Properties of CuCrZr Tube during Mass Production for the ITER Divertor Outer Vertical Target*)
    Seki, Yohji
    Fukuda, Makoto
    Sakurai, Takeru
    Ezato, Koichiro
    Plasma and Fusion Research, 2022, 17
  • [38] Effect of Laser Powder Bed Fusion Process Parameters on the Microstructures, Mechanical Properties, and Conductivity of CuCrZr Alloy
    Dongfang, Kaixuan
    Fan, Hongju
    Sui, Shougang
    Li, Huaixue
    Liu, Haonan
    Li, Yang
    Liu, Peng
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024,
  • [39] First-Principles Calculations of Material Properties of CuCrZr Alloy Contacts
    Ding, Can
    Liu, Qinuo
    Sun, Qiankun
    Feng, Lu
    IEEJ TRANSACTIONS ON ELECTRICAL AND ELECTRONIC ENGINEERING, 2024, 19 (12) : 1916 - 1926
  • [40] Effect of pre-ageing on microstructure and properties of an Al-Mg-Si-Cu alloy used for automotive body sheets
    Guo, Fu-An
    Cao, Ling-Yong
    Zhao, Feng
    Zhang, Hua
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2015, 36 (07): : 88 - 93
12345