Ageing effect on the properties of CuCrZr alloy used for the ITER HHF components

被引：31
|
作者：
Kalinin, G. M.
Ivanov, A. D.
Obushev, A. N.
Rodchenkov, B. S.
Rodin, M. E.
Strebkov, Y. S.
机构：
[1] Engn Ctr Nucl Equipment Strength ENES, Moscow 10100, Russia
[2] Res & Dev Inst Power Engn RDIPE, Moscow 10100, Russia
来源：
JOURNAL OF NUCLEAR MATERIALS | 2007年 / 367卷
关键词：
D O I：
10.1016/j.jnucmat.2007.03.256
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The tensile properties and structure changes due to various heat treatments of CuCrZr alloy with the composition specified for high heat flux components of ITER have been measured. The material was solution annealed at 970-1000 degrees C for 0.5-1 h and water quenched. The ageing temperatures were 350-650 degrees C and ageing times 1-180 min. Temperature-time diagrams of properties changes have been plotted. This gives guidelines for the selection of manufacturing heat treatments and prediction of the strength and ductility of CuCrZr alloy after applied manufacturing cycles. The effects of secondary heat treatment have also been studied. After first ageing at 480 degrees C for 2 h, an additional heat treatment at 650-750 degrees C was applied. The tensile properties after the applied heat treatments are presented. (C) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码：920 / 924
页数：5
相关论文
共 50 条
  • [1] Specification of properties and design allowables for copper alloys used in HHF components of ITER
    Kalinin, GM
    Fabritziev, SA
    Singh, BN
    Tahtinen, S
    Zinkle, SJ
    JOURNAL OF NUCLEAR MATERIALS, 2002, 307 : 668 - 672
  • [2] Effect of the ITER FW Manufacturing Process on the Microstructure and Properties of a CuCrZr Alloy
    刘丹华
    王平怀
    宋义
    李前
    谌继明
    Plasma Science and Technology, 2015, 17 (10) : 887 - 892
  • [3] Effect of the ITER FW Manufacturing Process on the Microstructure and Properties of a CuCrZr Alloy
    刘丹华
    王平怀
    宋义
    李前
    谌继明
    Plasma Science and Technology, 2015, (10) : 887 - 892
  • [4] Effect of the ITER FW Manufacturing Process on the Microstructure and Properties of a CuCrZr Alloy
    Liu Danhua
    Wang Pinghuai
    Song Yi
    Li Qian
    Chen Jiming
    PLASMA SCIENCE & TECHNOLOGY, 2015, 17 (10) : 887 - 892
  • [5] Acceptable mechanical properties of CuCrZr cooling tubes of iter divertor plasma facing components
    Komarov, V
    Labusov, A
    Malkov, A
    PLASMA DEVICES AND OPERATIONS, 2002, 10 (01): : 17 - 26
  • [6] Development of fabrication technology and investigation of properties of steel-to-bronze joints suggested for ITER HHF components
    Kalinin, G. M.
    Abramov, V. Ya.
    Gervash, A. A.
    Zolotarev, V. B.
    Krestnikov, N. S.
    Mazul, I. V.
    Strebkov, Yu. S.
    Fabritsiev, S. A.
    JOURNAL OF NUCLEAR MATERIALS, 2009, 386-88 : 927 - 930
  • [7] Effect of cooling rate on mechanical properties of aged ITER-grade CuCrZr
    Park, Jeong-Yong
    Lee, Jung-Suk
    Choi, Byung-Kwon
    Hong, BongGuen
    Jeong, Yong Hwan
    FUSION ENGINEERING AND DESIGN, 2008, 83 (10-12) : 1503 - 1507
  • [8] Effect of continuous extrusion on the microstructure and mechanical properties of a CuCrZr alloy
    Feng, Hui
    Jiang, Haichang
    Yan, Desheng
    Rong, Lijian
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 582 : 219 - 224
  • [9] Effect of rare-earth element on properties of CuCrZr alloy
    Liu, Jiwen
    Jinshu Rechuli/Heat Treatment of Metals, 1994, (01): : 24 - 27
  • [10] Microstructure investigation of bronze/steel brazed joints proposed for HHF components of ITER manufacturing
    Kalinin, G. M.
    Krestnikov, N. S.
    Jarovinskiy, Yu. L.
    Makhin, I. D.
    Nikolaev, V. V.
    Skladnov, K. S.
    Strebkov, Yu. S.
    Zolotarev, V. B.
    FUSION ENGINEERING AND DESIGN, 2008, 83 (10-12) : 1521 - 1523
12345