Detection of accelerated tool wear in turning

被引：19

作者：

Bombinski, Sebastian ^{[1
]}

Kossakowska, Joanna ^{[2
]}

Jemielniak, Krzysztof ^{[2
]}

机构：

[1] Kazimierz Pulaski Univ Technol & Humanities Radom, Ul Stasieckiego 54, PL-26600 Radom, Poland

[2] Warsaw Univ Technol, Narbutta 86, PL-02524 Warsaw, Poland

来源：

MECHANICAL SYSTEMS AND SIGNAL PROCESSING | 2022年 / 162卷

关键词：

Turning; Accelerated tool wear detection; Cutting force; Hierarchical time windows; ONLINE; FORCE; MODEL; PREDICTION; MACHINE; NETWORK; SIGNALS;

D O I：

10.1016/j.ymssp.2021.108021

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

There are many algorithms for the identification of gradual tool wear (GTW) which usually counts in minutes and the detection of catastrophic tool failure (CTF) which counts in milliseconds. However, the tool may lose its cutting ability by accelerated tool wear (ATW), which may last several seconds and cannot be sensed either by GTW or CTF detection algorithms. The paper presents an innovative algorithm for early detection of ATW and CTF. It consists in comparing the waveforms of the cutting force sensor signal in hierarchical time windows. The compared waveforms are independent of the absolute value of the signal. This allows the detection of ATWs of different intensity and duration. Tests proved that successful detection of ATW allows for prevention of CTF.

引用

页数：16

共 50 条

[21] A Quantitative Strategy for Tool Wear Monitoring in Turning
Shi, X. H.
Shao, H.
Li, Jishun
PROCEEDINGS OF THE 6TH CIRP-SPONSORED INTERNATIONAL CONFERENCE ON DIGITAL ENTERPRISE TECHNOLOGY, 2010, 66 : 647 - +
[22] A model of tool wear monitoring system for turning
Model sustava za klasifikaciju trošenja alata pri obradi tokarenjem
1600, Strojarski Facultet (20):
[23] ONLINE TOOL WEAR SENSING FOR TURNING OPERATIONS
ELGOMAYEL, JI
BREGGER, KD
JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME, 1986, 108 (01): : 44 - 47
[24] TURNING WITH INTERRUPTED CUTTING - TOOL WEAR BY CARBIDES
KAESTNER, W
WERKSTATTSTECHNIK ZEITSCHRIFT FUR INDUSTRIELLE FERTIGUNG, 1990, 80 (12): : 672 - 676
[25] Effect of tool wear on roughness in hard turning
Penalva, ML
Arizmendi, M
Díaz, F
Fernández, J
CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2002, 51 (01) : 57 - 60
[26] The dependence of tool overhang on surface quality and tool wear in the turning process
Murat Kiyak
Billur Kaner
Ibrahim Sahin
Bilal Aldemir
Orhan Cakir
The International Journal of Advanced Manufacturing Technology, 2010, 51 : 431 - 438
[27] The dependence of tool overhang on surface quality and tool wear in the turning process
Kiyak, Murat
Kaner, Billur
Sahin, Ibrahim
Aldemir, Bilal
Cakir, Orhan
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2010, 51 (5-8): : 431 - 438
[28] Chatter stability of a slender cutting tool in turning with tool wear effect
Chiou, Richard Y.
Liang, Steven Y.
International Journal of Machine Tools and Manufacture, 1998, 38 (04): : 315 - 327
[29] A study of chatter frequency of a cutting tool with tool wear in turning preparation
Chiou, RYS
Liang, SY
MATERIALS ISSUES IN MACHINING - III AND THE PHYSICS OF MACHINING PROCESSES - III, 1996, : 209 - 223
[30] Chatter stability of a slender cutting tool in turning with tool wear effect
Chiou, RY
Liang, SY
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1998, 38 (04): : 315 - 327

← 1 2 3 4 5 →