Study on micro-hardness of electroless composite plating of Ni-P with SiC nano-particles

被引：0
|
作者：
Sun, Yong [1 ,2 ]
Zhang, Zhaoguo [1 ]
Li, Jiamin [3 ]
Xu, Donghui [1 ]
机构：
[1] NE Agr Univ, Harbin 150030, Peoples R China
[2] Heilongijiang Agr Polytech Univ, Jiamusi 154007, Peoples R China
[3] Luoding Polytech Univ, Luoding 527200, Peoples R China
来源：
INTERNATIONAL CONFERENCE ON SMART MATERIALS AND NANOTECHNOLOGY IN ENGINEERING, PTS 1-3 | 2007年 / 6423卷
关键词：
Ni-P alloys; nano-marterials; SiC; electroless composite plating; micro-hardness; ultrasonic;
D O I：
10.1117/12.780124
中图分类号：
V [航空、航天];
学科分类号：
08 ; 0825 ;
摘要：
In this paper, a Ni-P electroless composite coating containing nano SiC particles was produced. The wearability of the composite coating was studied. Temperature, PH of the plating liquid and the concentration of SiC nanoparticles in the plating liquid were taken as parameters and the experiment with three factors and five levels was designed through the method of quadratic orthogonal rotation combination. SiC nanoparticles were dispersed by ultrasonic. The influence of the testing parameters on the hardness of the coating was studied intensively. The optimal parameters were obtained when the temperature is 86 +/- 1 degrees C, PH is 6 +/- 0.5 and the concentration of SiC nanoparticles is 6g/L. The maximal hardness of the coating is over 1700HV after heat treatment.
引用
收藏
页数：6
相关论文
共 50 条
  • [31] Study on Kinetics of Electroless Plating Palladiumon on Ni-P Coatings
    Wu, Daoxin
    Liu, Ying
    Xiao, Zhongliang
    FUNDAMENTAL OF CHEMICAL ENGINEERING, PTS 1-3, 2011, 233-235 : 2840 - 2843
  • [32] Study on the reaction rate and mechanism of Ni-P electroless plating
    Zhang, GD
    ACTA PHYSICO-CHIMICA SINICA, 1998, 14 (05) : 429 - 434
  • [33] Study on the Technology of Ni-P Electroless Plating on the Mg Alloy
    Liu Yihan
    Sun Huawei
    Jiang Yanan
    RARE METAL MATERIALS AND ENGINEERING, 2012, 41 : 472 - 474
  • [34] A Electroless plating of Ni-P on the Metalized Ceramics
    Nanjing Electronic Devices Institute Li Qinzhong Shi Dequan
    材料保护, 1992, (07) : 4 - 7
  • [35] Preparation and characterization of micro or nano cellulose fibers via electroless Ni-P composite coatings
    Pan, Yan-Fei
    Huang, Jin-Tian
    Wang, Xin
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART N-JOURNAL OF NANOMATERIALS NANOENGINEERING AND NANOSYSTEMS, 2016, 230 (04) : 213 - 221
  • [36] Effects of Plating Conditions on Electroless Ni-P Plating in the Microchannel
    Yang, Ching-Yun
    Hung, Han-Tang
    Kao, C. Robert
    2018 INTERNATIONAL CONFERENCE ON ELECTRONICS PACKAGING AND IMAPS ALL ASIA CONFERENCE (ICEP-IAAC), 2018, : 74 - 77
  • [37] The Impact Law of Plating Rate Based on Orthogonal Experimental for Electroless Ni-P-Nano SiC Composite Plating
    Wang, Hong
    MEMS, NANO AND SMART SYSTEMS, PTS 1-6, 2012, 403-408 : 4426 - 4429
  • [38] Optimization of barrel plating process for electroless Ni-P plating
    Hong, In Kwon
    Kim, Hyungjin
    Lee, Seung Bum
    JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY, 2014, 20 (05) : 3767 - 3774
  • [39] Characterisation of electroless Ni-P and electroless composite coatings Ni-P/Ni-PTFE
    Karaguiozova, Zdravka K.
    INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING, 2018, 12 (5-6) : 496 - 506
  • [40] The Effects of Electroless Ni-P Coated SiC on the Properties of Magnesium Composite
    Muraliraja, R.
    Pradeepkumar, K.
    Mohanraj, P.
    Kumar, T. Vinod
    Dhanasekaran, C.
    Chandrasekaran, M.
    Ragavanantham, S.
    Shaisundaram, V. S.
    MATERIALS PERFORMANCE AND CHARACTERIZATION, 2022, 11 (01) : 223 - 235
12345