Analyzing As-Cast Age Hardening of 356 Cast Alloy

被引:4
|
作者
Wang, Guiqing [1 ]
Yan, Liu [1 ]
Ren, Guocheng [1 ]
Zhao, Zhongkui [1 ]
机构
[1] Shandong Architectural Univ, Dept Mat Sci & Technol, Jinan 250101, Peoples R China
关键词
age hardening; aluminum alloy; as-cast aging; precipitates; MG-SI ALLOYS; ANOMALOUS MICROSEGREGATION; PRECIPITATION BEHAVIOR; ALUMINUM-ALLOYS; FOUNDRY ALLOYS; KINETICS;
D O I
10.1007/s11665-010-9708-z
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The as-cast age hardening behavior of 356 cast alloy has been investigated by micro hardness measurement, differential scanning calorimetry (DSC), transmission electron microscope (TEM), and electron probe micro analyzer. Age hardening results show that micro hardness value after as-cast aging treatment is almost the same as by T6 treatment, and the solidification rate has little effect on the as-cast age hardening response of 356 cast alloy. DSC and TEM analysis results show that the as-cast age hardening response of 356 cast alloy is attributed to the precipitation of beta' and beta aEuro(3) phases, the high Si concentration in alpha(Al) contributes about 10 HV to the micro hardness value for samples in as-cast and as-cast aging conditions.
引用
收藏
页码:399 / 404
页数:6
相关论文
共 50 条
  • [41] Modelling of mechanical properties of cast A356 alloy
    Shabani, M. O.
    Alizadeh, M.
    Mazahery, A.
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2011, 34 (12) : 1035 - 1040
  • [42] Dry sliding wear properties of as-cast A356/SiCp composites
    Jin Yunxue
    Lee, Jung-Moo
    Kang, Suk Bong
    JOURNAL OF THE KOREAN INSTITUTE OF METALS AND MATERIALS, 2007, 45 (02): : 118 - 127
  • [43] Comparison of age-hardening characteristic in thixo-cast and rheo-cast T5-A356 alloys by nanoindenter and AFM
    Cho, H.
    Youn, S. W.
    Kang, C. G.
    ENGINEERING PLASTICITY AND ITS APPLICATIONS FROM NANOSCALE TO MACROSCALE, PTS 1 AND 2, 2007, 340-341 : 919 - +
  • [44] Age-hardening heat treatment behavior of as-cast Mg-Zn-Al alloys
    Patil, H. S.
    Patel, D. C.
    FRATTURA ED INTEGRITA STRUTTURALE-FRACTURE AND STRUCTURAL INTEGRITY, 2021, 15 (57): : 350 - 358
  • [45] Age-hardening behavior of cast Al-Si base alloy
    Li, RX
    Li, RD
    Zhao, YH
    He, LZ
    Li, CX
    Guan, HR
    Hu, ZQ
    MATERIALS LETTERS, 2004, 58 (15) : 2096 - 2101
  • [46] Age hardening of cast Cu20Ni20Mn alloy
    School of Engineering Machinery, Chang'an University, Xi'an 710064, China
    不详
    Chang'an Daxue Xuebao, 2006, 3 (100-102):
  • [47] Effect of as-cast surface on fatigue properties of cast aluminum alloy in air and corrosion environment
    Kobayashi, Yukiyoshi
    Xuehong, He
    Harada, Shoji
    Yoshizawa, Akira
    Zairyo/Journal of the Society of Materials Science, Japan, 2002, 51 (12) : 1341 - 1344
  • [48] Microstructure evolution and constitutive modeling of as-cast A356 aluminum alloy in semi-solid deformation regime
    Gashti, A. H. Boluri
    Abedi, H. R.
    Salehi, M. T.
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 24 : 7720 - 7731
  • [49] Effect of RE elements on the microstructural and mechanical properties of as-cast and age hardening processed Mg-4Al-2Sn alloy
    Majd, Amir Mahyar
    Farzinfar, Mohammad
    Pashakhanlou, Matin
    Nayyeri, Mohammad Javad
    JOURNAL OF MAGNESIUM AND ALLOYS, 2018, 6 (03) : 309 - 317
  • [50] Enhancement in Strain Hardening on Boron Addition in As-Cast Ti-6Al-4V Alloy
    Agrawal, Priyanka
    Karthikeyan, S.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2015, 68 : S195 - S205