Microstructures and microhardness of SNCed medium carbon low alloy steels

被引：9
|
作者：
Zhang, JB [1 ]
Liu, YL
Zhao, XQ
Wu, J
Song, HW
Xiong, TY
机构：
[1] Baoshan Iron & Steel Co Ltd, Baosteel Technol Ctr, Shanghai 201900, Peoples R China
[2] Chinese Acad Sci, Met Res Inst, Shenyang 110016, Peoples R China
来源：
PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5 | 2005年 / 475-479卷
关键词：
surface nanocrystallization; microstructure; mechanical properties; 0.4C-1.0Cr low alloy steel; 1.0C-1.5Cr low alloy steel;
D O I：
10.4028/www.scientific.net/MSF.475-479.137
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Nanostructured layers were fabricated on the surface of 0.4C-1.0Cr and 1.0C-1.5Cr low alloy steels by using an ultrasonic particulate peening (USPP) technique. The microstructures and mechanical properties of the nanocrystallized layers were characterized by means of transmission electron microscopy, and nano-indentation test. Results showed that the average grain size in the surface nanocrystallized layer of 0.4C-1.0Cr and 1.0C-1.5Cr low alloy steel was about 5nm and 10nm, respectively. The nano-indentation hardnesses of the surface nanocrystallized layer were enhanced significantly and reach upwards of 8.0 GPa and 12.5 GPa, respectively.
引用
收藏
页码：137 / 140
页数：4
相关论文
共 50 条
  • [21] Prediction of austenite decomposition during cooling of low and medium-carbon low-alloy steels
    Anelli, E
    Cesile, MC
    Di Nunzio, PE
    MODELING, CONTROL AND OPTIMIZATION IN FERROUS AND NONFERROUS INDUSTRY, 2003, : 453 - 466
  • [22] The Effect of Lath Martensite Microstructures on the Strength of Medium-Carbon Low-Alloy Steel
    Sun, Chen
    Fu, Paixian
    Liu, Hongwei
    Liu, Hanghang
    Du, Ningyu
    Cao, Yanfei
    CRYSTALS, 2020, 10 (03):
  • [23] Stress corrosion cracking of carbon steels and low alloy steels
    Nakayama, T.
    Welding International, 2007, 21 (02) : 89 - 94
  • [24] PROBLEMS OF BAINITIC TRANSFORMATION AND MICROSTRUCTURES IN LOW-CARBON STEELS
    ARAKI, T
    ENOMOTO, M
    SHIBATA, K
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1991, 77 (10): : 1544 - 1550
  • [25] Cold Rolling and Annealing Microstructures and Textures of Low Carbon Steels
    Almojil, M.
    Bate, P. S.
    PRICM 7, PTS 1-3, 2010, 654-656 : 214 - 217
  • [26] Influence of Part Size on Microstructure during Austempering of Medium Carbon Low-Alloy Steels
    Tiwari, Priya
    Varshney, Abhinav
    STEEL RESEARCH INTERNATIONAL, 2024, 95 (10)
  • [27] Development of fracture toughness of ultrahigh strength, medium carbon, low alloy steels for aerospace applications
    Tomita, Y
    INTERNATIONAL MATERIALS REVIEWS, 2000, 45 (01) : 27 - 37
  • [28] FRACTOGRAPHY OF LOW-CARBON AND LOW-ALLOY STEELS
    GEORGIEV, MN
    GORITSKII, VM
    STROK, LP
    KHROMOV, DP
    RUSSIAN METALLURGY, 1986, (03): : 154 - 157
  • [29] The effect of microstructure on the KISSC of low carbon low alloy steels
    Echaniz, G
    Morales, C
    Pérez, T
    ADVANCES IN CORROSION CONTROL AND MATERIALS IN OIL AND GAS PRODUCTION, 1999, (26): : 135 - 140
  • [30] LUBRICATION FOR COLD EXTRUSION OF LOW CARBON AND LOW ALLOY STEELS
    不详
    METAL FORMING, 1971, 38 (03): : 81 - &
12345