Biomechanical properties of human and porcine corneas

被引:199
|
作者
Elsheikh, Ahmed [1 ]
Alhasso, Daad [1 ]
Rama, Paolo [2 ]
机构
[1] Univ Dundee, Div Civil Engn, Dundee DD1 4HN, Scotland
[2] Hosp San Raffaele, Dept Ophthalmol, I-20132 Milan, Italy
关键词
corneal biomechanics; creep behaviour; stress-relaxation behaviour;
D O I
10.1016/j.exer.2008.02.006
中图分类号
R77 [眼科学];
学科分类号
100212 ;
摘要
The suitability of porcine corneas as approximate models for human corneas in mechanical property characterisation studies is experimentally assessed. Thirty seven human donor corneas and thirty four ex-vivo porcine corneas were tested under inflation conditions to determine their short-term stress-strain behaviour and long-term creep behaviour up to 2.8 h (10,000 s). Vertical strips extracted from further 12 human corneas and 10 porcine corneas were subjected to stress-relaxation tests for up to 20 min at different stress levels. Human and porcine corneas were observed to have almost the same form of behaviour under short and long-term loading. They both exhibited non-linear stress-strain behaviour and reacted to sustained loading in a similar fashion. However, human corneas were significantly stiffer than porcine corneas. They also crept less under long-term loading and could sustain their stress state for longer compared to porcine corneas. These differences, in addition to others identified earlier in relation to corneal mechanical anisotropy, cast doubt on the suitability of porcine corneas as models for human corneas in mechanical studies. (c) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码:783 / 790
页数:8
相关论文
共 50 条
  • [21] Effect of Age on the Biomechanical Properties of Porcine LCL
    Singh, Narendra
    Trajkovski, Jovan
    Matas, Jose Felix Rodriguez
    Kunc, Robert
    BIOENGINEERING-BASEL, 2025, 12 (01):
  • [22] Experimental Research on the Biomechanical Properties of the Porcine Iris
    Lei, Yuxi
    Zhang, Kunya
    Chen, Chen
    Song, Hongfang
    Cao, Haiyong
    Liu, Zhicheng
    WORLD CONGRESS ON MEDICAL PHYSICS AND BIOMEDICAL ENGINEERING 2006, VOL 14, PTS 1-6, 2007, 14 : 2816 - +
  • [23] Biomechanical properties and microstructure of neonatal porcine ventricles
    Ahmad, Faizan
    Prabhu, Raj
    Liao, Jun
    Soe, Shwe
    Jones, Michael D.
    Miller, Jonathan
    Berthelson, Parker
    Enge, Daniel
    Copeland, Katherine M.
    Shaabeth, Samar
    Johnston, Richard
    Maconochie, Ian
    Theobald, Peter S.
    JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2018, 88 : 18 - 28
  • [24] Influences of somatotropin on biomechanical properties of porcine skin
    Caperna, TJ
    Vossoughi, J
    LABORATORY ANIMAL SCIENCE, 1999, 49 (02): : 212 - 215
  • [25] DIRECTIONAL BIOMECHANICAL PROPERTIES OF PORCINE SKIN TISSUE
    Huang, Hsiao-Ying Shadow
    Huang, Siyao
    Frazier, Colin P.
    Prim, Peter M.
    Harrysson, Ola
    JOURNAL OF MECHANICS IN MEDICINE AND BIOLOGY, 2014, 14 (05)
  • [26] Biomechanical evaluation of human and porcine Auricular cartilage
    Zopf, David A.
    Flanagan, Colleen L.
    Nasser, Hassan B.
    Mitsak, Anna G.
    Huq, Farhan S.
    Rajendran, Vishnu
    Green, Glenn E.
    Hollister, Scott J.
    LARYNGOSCOPE, 2015, 125 (08): : E262 - E268
  • [27] Biomechanical changes on porcine corneas after riboflavin induced crosslink technique with non-UV light
    Grottone, Gustavo Teixeira
    Suga, Fabio
    Matsuda, Daniela
    Vaccaro, Luciane Lopes
    Teixeira Grottone, Juliana de Franca
    Grottone, Joao Carlos
    REVISTA BRASILEIRA DE OFTALMOLOGIA, 2008, 67 (03) : 109 - 113
  • [28] FEA of the biomechanics of porcine corneas
    Anderson, Kevin
    El-Sheikh, Ahmed
    Newson, Timothy
    Structural Engineer, 2004, 82 (12): : 20 - 25
  • [29] Cryopreservation studies with porcine corneas
    Wusteman, MC
    Armitage, WJ
    Wang, LH
    Busza, AL
    Pegg, DE
    CURRENT EYE RESEARCH, 1999, 19 (03) : 228 - 233
  • [30] Mechanical Characterization of Porcine Corneas
    Boschetti, F.
    Triacca, V.
    Spinelli, L.
    Pandolfi, A.
    JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 2012, 134 (03):