Influence of Vibration on the Heat Transfer of Lost Foam Casting Filling

被引：1
|
作者：
Zhao, Zhong [1 ]
Fan, Zitian [2 ]
机构：
[1] Ningbo Univ Technol, Sch Mech Engn, Ningbo 315016, Zhejiang, Peoples R China
[2] Huazhong Univ Sci & Technol, State Key Lab Mat Proc & Die & Mould Technol, Wuhan 430074, Peoples R China
来源：
MATERIALS PROCESSING TECHNOLOGY, PTS 1-3 | 2012年 / 418-420卷
基金：
国家高技术研究发展计划(863计划); 浙江省自然科学基金;
关键词：
Lost foam casting; filling; vibration; heat transfer; ALUMINUM; MODEL;
D O I：
10.4028/www.scientific.net/AMR.418-420.1618
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The vibration is superimposed to the filling process of aluminum and magnesium alloy in lost foam casting, and the flow lengths and the molten metal temperatures of the flow front are collected, and they compared with no-vibration. The results show that the vibration can significantly improve the filling capacity of the aluminum alloy, magnesium alloy in lost foam casting. Compared to the samples without vibration, the flow lengths of A356 alloy with vibration in lost foam casting increased by 33% and that of AZ91D alloy increased by 15%. The heat transfer of molten metal on the flow front was analyzed, and it indicates that the vibration energy extends the filling time of the molten metal on the flow front in lost foam casting.
引用
下载
收藏
页码：1618 / +
页数：2
相关论文
共 50 条
  • [21] Effects of mechanical vibration on filling and solidification behavior, microstructure and performance of Al/Mg bimetal by lost foam compound casting
    Guang-yu Li
    Feng Guan
    Wen-ming Jiang
    Yuan-cai Xu
    Zheng Zhang
    Zi-tian Fan
    ChinaFoundry, 2023, 20 (06) : 469 - 479
  • [22] Effects of mechanical vibration on filling and solidification behavior, microstructure and performance of Al/Mg bimetal by lost foam compound casting
    Li, Guang-yu
    Guan, Feng
    Jiang, Wen-ming
    Xu, Yuan-cai
    Zhang, Zheng
    Fan, Zi-tian
    CHINA FOUNDRY, 2023, 20 (06) : 469 - 479
  • [23] Effects of mechanical vibration on filling and solidification behavior, microstructure and performance of Al/Mg bimetal by lost foam compound casting
    Guang-yu Li
    Feng Guan
    Wen-ming Jiang
    Yuan-cai Xu
    Zheng Zhang
    Zi-tian Fan
    China Foundry, 2023, 20 : 469 - 479
  • [24] Determination of the heat transfer coefficient at the metal–sand mold interface of lost foam casting process
    Liqiang Zhang
    Wenfang Tan
    Hao Hu
    Heat and Mass Transfer, 2016, 52 : 1131 - 1138
  • [25] 3D computer simulation of melt flow and heat transfer in the lost foam casting process
    Mirbágheri, SMH
    Varahram, N
    Davami, P
    INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 2003, 58 (05) : 723 - 748
  • [26] Determination of the heat transfer coefficient at the metal-sand mold interface of lost foam casting process
    Zhang, Liqiang
    Tan, Wenfang
    Hu, Hao
    HEAT AND MASS TRANSFER, 2016, 52 (06) : 1131 - 1138
  • [27] Developing a new 2D model for heat transfer and foam degradation in EPS lost foam casting (LFC) process
    Shayegh, J.
    Hossainpour, S.
    Rezaei, M.
    Charchi, A.
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2010, 37 (09) : 1396 - 1402
  • [28] Development of lost foam casting
    Shulyak, V.S.
    Shinskij, O.I.
    Lemeshko, D.S.
    Litejnoe Proizvodstvo, 1995, (4-5):
  • [29] Lost Foam Casting in China
    YE Sheng-ping
    China Foundry, 2006, (02) : 134 - 136
  • [30] Lost foam casting in China
    Ye, Shengping
    Wu, Zhichao
    Tezhong Zhuzao Ji Youse Hejin/Special Casting and Nonferrous Alloys, 2005, 25 (09): : 557 - 559
12345