Effect of ultrasound on the viscosity-temperature properties of crude oils of various compositions

被引:33
|
作者
Mullakaev, M. S. [1 ]
Volkova, G. I. [2 ]
Gradov, O. M. [1 ]
机构
[1] Russian Acad Sci, Kurnakov Inst Gen & Inorgan Chem, Moscow 119991, Russia
[2] Russian Acad Sci, Inst Petr Chem, Siberian Branch, Tomsk 634021, Russia
关键词
ultrasound; ultrasonication; ultrasonic treatment; crude oil; petroleum disperse system; asphaltenes; paraffins; shear stress; shear rate; dynamic viscosity; effective viscosity; pour point; associates;
D O I
10.1134/S0040579515030094
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
The effect of ultrasonic treatment on the viscosity-temperature properties of crude oils of various component compositions has been studied. The efficiency of ultrasonication depends on the group composition of oil and treatment time. The ultrasonic treatment of low-paraffinic oils with a high tar and asphaltene content leads to a substantial decrease in viscosity and the pour point, and the efficiency of ultrasonication increases with an increase in the treatment time. For crude oils with a high n-alkane content, ultrasonic treatment is not effective, which is due to the intensification of crystallization of high-molecular n-alkanes. Calculations that evaluate the effect of ultrasonic treatment on variations in the viscosity of oils are performed based on the fatigue mechanism, which have shown that experimental data are in agreement with the calculated values.
引用
收藏
页码:287 / 296
页数:10
相关论文
共 50 条
  • [31] VISCOSITY-TEMPERATURE CHARACTERISTICS OF MINERAL-OILS CONTAINING VISCOSITY INDEX IMPROVER UNDER ELASTOHYDRODYNAMIC LUBRICATION
    MASUKO, M
    TODA, H
    OKABE, H
    JOURNAL OF JAPAN SOCIETY OF LUBRICATION ENGINEERS, 1987, 32 (02): : 148 - 151
  • [32] Effect of suspension viscosity-temperature characteristic on tribological properties of abrasive flow machining process
    Zhao, Jia
    Fang, Liang
    Sun, Kun
    Ma, De-Xin
    Mocaxue Xuebao/Tribology, 2008, 28 (02): : 173 - 177
  • [33] Magnetic field effect on apparent viscosity reducing of different crude oils at low temperature
    Jiang, Chen
    Guo, Linyuan
    Li, Yuanzhe
    Li, Shaowei
    Tian, Yu
    Ma, Liran
    Luo, Jianbin
    COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 2021, 629
  • [34] SEGREGATION OF LUBE OIL COMPONENTS WITH GOOD VISCOSITY-TEMPERATURE PROPERTIES
    BEZHANIDZE, AM
    ZIMINA, KI
    PETROVA, LN
    CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS, 1984, 20 (5-6) : 253 - 256
  • [35] Improvement on the Viscosity Models for the Effects of Temperature and Pressure on the Viscosity of Heavy Crude Oils
    MacDonald, Brittany A.
    Miadonye, Adango
    JOURNAL OF CHEMICAL AND ENGINEERING DATA, 2017, 62 (03): : 924 - 930
  • [36] CORRELATION OF VISCOSITY-TEMPERATURE PROPERTIES OF CHLOROFLUOROCARBONS WITH MOLECULAR-STRUCTURE
    SNYDER, CE
    PAIGE, HL
    HERRMANN, DK
    LUBRICATION ENGINEERING, 1991, 47 (06): : 485 - 489
  • [37] Properties, Chemical Compositions and Hydrotreatment Reactivities of Mongolian Crude Oils
    Sugimoto, Yoshikazu
    Horie, Yukichi
    Saotome, Yoshiaki
    Tserendorj, Tugsuu
    Byambajav, Enkhsaruul
    JOURNAL OF THE JAPAN PETROLEUM INSTITUTE, 2012, 55 (06) : 363 - 370
  • [38] Effect of nitogen-containing phenol oligomers on the viscosity-temperature properties of base motor oil
    M. N. Amiraslanova
    Ya. G. Abdullaev
    G. A. Guseinova
    N. M. Alieva
    R. A. Rustamov
    A. M. Mustafaev
    Chemistry and Technology of Fuels and Oils, 2011, 47 : 399 - 403
  • [39] EFFECT OF NITOGEN-CONTAINING PHENOL OLIGOMERS ON THE VISCOSITY-TEMPERATURE PROPERTIES OF BASE MOTOR OIL
    Amiraslanova, M. N.
    Abdullaev, Ya G.
    Guseinova, G. A.
    Alieva, N. M.
    Rustamov, R. A.
    Mustafaev, A. M.
    CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS, 2011, 47 (05) : 399 - 403
  • [40] Physicochemical properties and viscosity-temperature characteristic of jatropha curcas oil as fuel
    Luo F.
    Wang Z.
    Liang Y.
    Pan J.
    Guo J.
    Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering, 2010, 26 (05): : 227 - 231