Progress of the ITER central solenoid model coil programme

被引:58
|
作者
Tsuji, H [1 ]
Okuno, K
Thome, R
Salpietro, E
Egorov, S
Martovetsky, N
Ricci, M
Zanino, R
Zahn, G
Martinez, A
Vecsey, G
Arai, K
Ishigooka, T
Kato, T
Ando, T
Takahashi, Y
Nakajima, H
Hiyama, T
Sugimoto, M
Hosogane, N
Matsukawa, M
Miura, Y
Terakado, T
Okano, J
Shimada, K
Yamashita, M
Isono, T
Koizumi, N
Kawano, K
Oshikiri, M
Nunoya, Y
Matsui, K
Tsuchiya, Y
Nishijima, G
Kubo, H
Shimba, T
Hara, E
Imahashi, K
Uno, Y
Ohuchi, T
Ohtsu, K
Okayama, J
Kawasaki, T
Kawabe, M
Seki, S
Takano, K
Takaya, Y
Tajiri, F
Tsutsumi, F
Nakamura, T
机构
[1] Japan Atom Energy Res Inst, Naka, Ibaraki 31101, Japan
[2] ITER Joint Cent Team, Naka, Ibaraki, Japan
[3] MIT, Cambridge, MA 02139 USA
[4] European Fus Dev Agreement, Garching, Germany
[5] DV Efremov Sci Res Inst Electrophys Apparatus, St Petersburg, Russia
[6] Lawrence Livermore Natl Lab, Livermore, CA USA
[7] ENEA, Ctr Ric Frascati, Frascati, Italy
[8] Politecn Torino, Turin, Italy
[9] Forschungszentrum Karlsruhe, Eggenstein Leopoldshafen, Germany
[10] CEA Cadarache, St Paul Les Durance, France
[11] Ecole Polytech Fed Lausanne, Villigen, Switzerland
[12] Electrotech Lab, Tsukuba, Ibaraki 305, Japan
[13] Seikei Univ, Musashino, Tokyo, Japan
关键词
D O I
10.1088/0029-5515/41/5/319
中图分类号
O35 [流体力学]; O53 [等离子体物理学];
学科分类号
070204 ; 080103 ; 080704 ;
摘要
The world's largest pulsed superconducting coil was successfully tested by charging up to 13 T and 46 kA with a stored energy of 640 MJ. The ITER central solenoid (CS) model coil and CS insert coil were developed and fabricated through an international collaboration, and their cooldown and charging tests were successfully carried out by. international test and operation teams. In pulsed charging tests. where the original goal was 0.4 T/s up to 13 T. the CS model coil and the CS insert coil achieved ramp rates to 13 T of 0.6 T/s and 1.2 T/s, respectively. In addition, the CS insert coil was charged and discharged 10 003 times in the 13 T background field of the CS model coil and Ilo degradation of the operational temperature margin directly coming from this cyclic operation was observed. These test results fulfilled ail the goals of CS model coil development by confirming the validity of the engineering design and demonstrating that the ITER coils can now be constructed with confidence.
引用
下载
收藏
页码:645 / 651
页数:7
相关论文
共 50 条
  • [21] Design and fabrication of superconducting cables for ITER central solenoid model coil
    Matsui, K.
    Takahashi, Y.
    Nishi, M.
    Nunoya, K.
    Kato, T.
    Nakajima, H.
    Hiyama, T.
    Sugimoto, M.
    Isono, T.
    Kawano, K.
    Koizumi, N.
    Hamada, K.
    Ando, T.
    Tsuji, H.
    Shimamoto, S.
    IEEE Transactions on Magnetics, 1996, 32 (4 pt 1): : 2304 - 2307
  • [22] Fabrication of ITER Central Solenoid Model Coil-Outer Module
    Ando, T
    Hiyama, T
    Takahashi, Y
    Nakajima, H
    Kato, T
    Sugimoto, M
    Isono, T
    Kawano, K
    Koizumi, N
    Hamada, K
    Nunoya, Y
    Matsui, K
    Ishio, K
    Sawada, K
    Azuma, K
    Yamamoto, K
    Kubo, H
    Shinba, T
    Nishijima, G
    Tsuchiya, Y
    Terakado, T
    Miura, Y
    Tsuji, H
    Takano, H
    Osaki, O
    Fujioka, T
    Ikeda, S
    Inagaki, J
    Mizumaki, Y
    Ogata, H
    Hirumachi, T
    Sasaki, T
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 1999, 9 (02) : 628 - 631
  • [23] Design and fabrication of superconducting cables for ITER central solenoid model coil
    Matsui, K
    Takahashi, Y
    Nishi, M
    Nunoya, K
    Kato, T
    Nakajima, H
    Hiyama, T
    Sugimoto, M
    Isono, T
    Kawano, K
    Koizumi, N
    Hamada, K
    Ando, T
    Tsuji, H
    Shimamoto, S
    Shiga, N
    Aoki, N
    Ichihara, M
    IEEE TRANSACTIONS ON MAGNETICS, 1996, 32 (04) : 2304 - 2307
  • [24] Basic Design and Progress of Central Solenoid Model Coil for CFETR
    Wu, Yu
    Shi, Yi
    Li, Jiangang
    Qin, Jingang
    Yin, Dapeng
    Xu, Aihua
    Ma, Guanghui
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2018, 28 (03)
  • [25] Pancake-wound central solenoid coil for ITER
    Yoshida, K
    Krivchenkov, Y
    Kitamura, K
    Sborchia, C
    Stepanov, B
    Kubo, H
    Ohmori, J
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2000, 10 (01) : 576 - 579
  • [26] Acoustic emission during DC operations of the ITER Central Solenoid model coil
    Arai, K
    Ninomiya, A
    Ishigohka, T
    Takano, K
    Matsui, K
    Michael, PC
    Vieira, RF
    Martovetsky, NN
    Kaiho, K
    Nakajima, H
    Takahashi, Y
    Kato, T
    Ando, T
    Tsuji, H
    Okuno, K
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2002, 12 (01) : 504 - 507
  • [27] Analysis of AC Losses in the ITER Central Solenoid Insert Coil
    Breschi, Marco
    Bianchi, Marco
    Bonifetto, Roberto
    Carli, Stefano
    Devred, Arnaud
    Martovetsky, Nicolai
    Ribani, Pier Luigi
    Savoldi, Laura
    Takaaki, Isono
    Zanino, Roberto
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2017, 27 (04)
  • [28] Electromagnetic and Structural Analysis of ITER Central Solenoid Insert Coil
    Khodak, Andrei E.
    Martovetsky, Nicolai N.
    Smirnov, Alexandre V.
    Titus, Peter H.
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2012, 22 (03)
  • [29] Installation Progress of the Central Solenoid (CS) on ITER Site
    Jiang, Tao
    Che, Tong
    Shao, Lianli
    Zhu, Haiyu
    Wang, Peng
    Ma, Xiaofeng
    Zhou, Jun
    Schild, Thierry
    Cormany, Carl
    Miyoshi, Yasuyuki
    Bruton, Andrew
    Dao, Clement Nguyen Thanh
    Liao, Min
    Yang, Luxu
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2024, 34 (05) : 1 - 5
  • [30] Progress in the superconducting magnet technology through the ITER CS model coil programme
    Okuno, K
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2004, 14 (02) : 1376 - 1381