Oxidation behavior of Cu60Zr30Ti10 bulk metallic glass

被引:29
|
作者
Tam, CY [1 ]
Shek, CH [1 ]
机构
[1] City Univ Hong Kong, Dept Phys & Mat Sci, Kowloon, Hong Kong, Peoples R China
关键词
D O I
10.1557/JMR.2005.0182
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The oxidation kinetics of CU60Zr30Ti10 bulk metallic glass and its crystalline counterpart were studied in oxygen environment over the temperature range of 573-773 K. The oxidation kinetics, measured with thermogravimetric analysis, of the metallic glass follows a linear rate law between 573 and 653 K and a parabolic rate law between 673 and 733 K. It was also found that the oxidation activation energy of metallic glass is lower than that of its crystalline counterpart. The x-ray diffraction pattern showed that the oxide layer is composed of CU2O, CuO, ZrO2, and metallic Cu. Cu enrichment on the topmost oxide layer of the metallic glass oxidized at 573 K was revealed by x-ray photoelectron spectroscopy while there was a decrease in Cu content in the innermost oxide layer. The oxide surface morphologies observed from scanning electron microscopy showed that ZrO2 granules formed at low temperatures while whiskerlike copper oxides formed at higher temperatures.
引用
收藏
页码:1396 / 1403
页数:8
相关论文
共 50 条
  • [21] Oxidation-induced copper segregation in Cu60Zr30 Ti10 bulk metallic glass
    Tam C.Y.
    Shek C.H.
    Journal of Materials Research, 2006, 21 (4) : 851 - 855
  • [22] Dynamics of a bulk metallic glass CU60Zr20Hf10Ti10
    Agarwal, PC
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 404 (1-2): : 301 - 304
  • [23] Microstructure feature of bulk glassy Cu60Zr30Ti10 alloy in As-cast and annealed states
    Chen, YT
    Zhang, T
    Zhang, W
    Ping, DH
    Hono, K
    Inoue, A
    Sakurai, T
    MATERIALS TRANSACTIONS, 2002, 43 (10) : 2647 - 2650
  • [24] High pressure torsion of amorphous Cu60Zr30Ti10 alloy
    Hobor, Sandor
    Revesz, Adam
    Szabo, Peter J.
    Zhilyaev, Alex P.
    Kis, Viktoria Kovacs
    Labar, Janos L.
    Kovacs, Zsolt
    JOURNAL OF APPLIED PHYSICS, 2008, 104 (03)
  • [25] Effect of the substitution of Ag and Ni for Cu on the glass forming ability and plasticity of Cu60Zr30Ti10 alloy
    Park, ES
    Chang, HJ
    Kim, DH
    Ohkubo, T
    Hono, K
    SCRIPTA MATERIALIA, 2006, 54 (09) : 1569 - 1573
  • [26] Is Cu60Ti10Zr30 a bulk glass-forming alloy?
    Jiang, JZ
    Saida, J
    Kato, H
    Ohsuna, T
    Inoue, A
    APPLIED PHYSICS LETTERS, 2003, 82 (23) : 4041 - 4043
  • [27] Enhancement of solderability of Cu60Zr30Ti 10 bulk metallic glass by dealloying in hydrofluoric acid solution
    Naoi T.
    Nishikawa H.
    Takemoto T.
    Abe H.
    Fukuhara M.
    Inoue A.
    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2011, 29 (03): : 147s - 150s
  • [28] Nanostructured bulk glassy Cu60Zr30Ti10 alloy with high strength and good ductility in cast state
    Chen, YT
    Zhang, T
    Zhang, W
    Inoue, A
    Ding, QF
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2003, 13 (05) : 1025 - 1029
  • [29] Nanostructured bulk glassy Cu60Zr30Ti10 alloy with high strength and good ductility in cast state
    陈颜堂
    张涛
    张伟
    INOUE Akihisa
    丁庆丰
    Transactions of Nonferrous Metals Society of China, 2003, (05) : 1025 - 1029
  • [30] Influence of nanoprecipitation on strength of Cu60Zr30Ti10 glass containing μm-ZrC particle reinforcements
    Kato, H
    Yubuta, K
    Louzguine, DV
    Inoue, A
    Kim, HS
    SCRIPTA MATERIALIA, 2004, 51 (06) : 577 - 581