Microstructure of Ba1-xLaxTiO3-δ ceramics sintered by Spark Plasma Sintering

Nano-sized Ba1-xLaxTiO3 (0.00 <= x <= 0.14) powders were prepared by a coprecipitation method and calcined at 850 degrees C in air. The corresponding ceramics were obtained by Spark Plasma Sintering (SPS) at 1050 degrees C. These ceramics are oxygen deficient and are marked as Ba1-xLaxTiO3-delta. Both powders and ceramics were characterized by X-ray diffraction (XRD) and Transmission Electron Microscopy (TEM). The effect of lanthanum concentration on the densification behavior, on the structure and the microstructure of the oxides was investigated. Average grain sizes are comprised between 54 (3) nm and 27 (2) nm for powders, and 330 (11) nm and 36 (1) nm for ceramics according to the La-doping level. Powders crystallize in the cubic (or pseudo-cubic) perovskite phase. The structure of ceramics consists in a mixture of cubic (or pseudo-cubic) and tetragonal perovskite type phases. As the lanthanum content increases, the tetragonality of the samples decreases, as well as the grain size. (C) 2011 Elsevier Ltd. All rights reserved.