The Influence of Cycle Sputtering Deposition on the Properties of Cu2ZnSnS4 Thin Films

被引：0
|
作者：
Sun, Y. M. [1 ,2 ,3 ,4 ]
Yao, B. [1 ,2 ,3 ]
Long, D. [4 ]
Meng, X. C. [4 ]
Liu, L. H. [4 ]
Hua, Z. [4 ]
机构：
[1] Jilin Univ, State Key Lab Superhard Mat, Changchun 130023, Peoples R China
[2] Jilin Univ, Coll Phys, Changchun 130023, Peoples R China
[3] Jilin Univ, Coll Phys, Key Lab Phys & Technol Adv Batteries, Minist Educ, Changchun 130012, Peoples R China
[4] Jilin Normal Univ, Key Lab Funct Mat Phys & Chem, Minist Educ, Siping 136000, Peoples R China
来源：
ACTA PHYSICA POLONICA A | 2016年 / 129卷 / 06期
基金：
中国国家自然科学基金;
关键词：
SULFURIZATION;
D O I：
10.12693/APhysPolA.129.1169
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
Three kinds of precursor thin films with stacking orders of Cu/Sn/ZnS, Cu/Sn/ZnS/Cu/Sn/ZnS and Cu/Sn/ZnS/Cu/Sn/ZnS/Cu/Sn/ZnS were prepared by magnetron sputtering and annealed with sulfur powder. The microstructure, morphology and optical properties of thin films were investigated by X-ray diffraction, the Raman scattering, scanning electron microscopy and UV-visible spectrophotometer. The increase of cycle number decreases the sulfurizing temperature of the formation of Cu2ZnSnS4 phase. Chemical composition can be controlled by cycle sputtering deposition. After sulfurizing at 500 degrees C, the particle size and the band gap increase with increasing cycle number.
引用
收藏
页码：1169 / 1172
页数：4
相关论文
共 50 条
  • [1] Deposition of Cu2ZnSnS4 Thin Films by Magnetron Sputtering and Subsequent Sulphurization
    Khalkar, Arun
    Lim, Kwang-Soo
    Yu, Seong-Man
    Patole, Shashikant P.
    Yoo, Ji-Beom
    ELECTRONIC MATERIALS LETTERS, 2014, 10 (01) : 43 - 49
  • [2] Deposition of Cu2ZnSnS4 thin films by magnetron sputtering and subsequent sulphurization
    Arun Khalkar
    Kwang-Soo Lim
    Seong-Man Yu
    Shashikant P. Patole
    Ji-Beom Yoo
    Electronic Materials Letters, 2014, 10 : 43 - 49
  • [3] Spray deposition of Cu2ZnSnS4 thin films
    Valdes, M.
    Santoro, G.
    Vazquez, M.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 585 : 776 - 782
  • [4] Preparation of Cu2ZnSnS4 thin films by hybrid sputtering
    Tanaka, T
    Nagatomo, T
    Kawasaki, D
    Nishio, M
    Guo, QX
    Wakahara, A
    Yoshida, A
    Ogawa, H
    JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, 2005, 66 (11) : 1978 - 1981
  • [5] Preparations of Cu2ZnSnS4 thin films and Cu2ZnSnS4/Si heterojunctions on silicon substrates by sputtering
    Xu, Jiaxiong
    Yang, Yuanzheng
    Cao, Zhongming
    Xie, Zhiwei
    OPTIK, 2016, 127 (04): : 1567 - 1571
  • [6] The influence of sulfurization temperature on the properties of Cu2ZnSnS4 thin films
    Zhuang, D. (dmzhuang@tsinghua.edu.cn), 1600, Chinese Journal of Materials Research (27):
  • [7] Effect of deposition temperature on the properties of Cu2ZnSnS4 (CZTS) thin films
    Khalate, S. A.
    Kate, R. S.
    Kim, J. H.
    Pawar, S. M.
    Deokate, R. J.
    SUPERLATTICES AND MICROSTRUCTURES, 2017, 103 : 335 - 342
  • [8] The chemical vapor deposition of Cu2ZnSnS4 thin films
    Ramasamy, Karthik
    Malik, Mohammad A.
    O'Brien, Paul
    CHEMICAL SCIENCE, 2011, 2 (06) : 1170 - 1172
  • [9] Reactive sputtering of Cu2ZnSnS4 thin films - Target effects on the deposition process stability
    Kubart, Tomas
    Ericson, Tove
    Scragg, Jonathan J.
    Edoff, Marika
    Platzer-Bjorkman, Charlotte
    SURFACE & COATINGS TECHNOLOGY, 2014, 240 : 281 - 285
  • [10] Optical properties of thin Cu2ZnSnS4, films produced by RF magnetron sputtering
    E. V. Maistruk
    P. D. Mar’yanchuk
    M. N. Solovan
    F. Pinna
    E. Tresso
    Optics and Spectroscopy, 2017, 123 : 38 - 43
12345