Effect of sealing treatment on corrosion behavior of plasma sprayed ZrO2 coated Cf/Mg composites

被引：9

作者：

Yang, Li ^{[1
]}

Shi, Xiaohong ^{[1
]}

Tian, Xinfa ^{[1
]}

Han, Xu ^{[1
]}

Mu, Jierui ^{[1
]}

Qi, Lehua ^{[2
]}

机构：

[1] Northwestern Polytech Univ, State Key Lab Solidificat Proc, Shaanxi Key Lab Fiber Reinforced Light Composite, Xian, Peoples R China

[2] Northwestern Polytech Univ, Sch Mech Engn, Xian, Peoples R China

来源：

SURFACE & COATINGS TECHNOLOGY | 2021年 / 423卷

基金：

中国国家自然科学基金;

关键词：

C-f/Mg composites; Sealing treatment; SiO2; ZrO2; coating; Corrosion behavior; MECHANICAL-PROPERTIES; INTERFACIAL MICROSTRUCTURES; RESISTANCE; MAGNESIUM; COATINGS; ALLOY; PARTICLES; GRAPHENE; ABLATION; HYBRID;

D O I：

10.1016/j.surfcoat.2021.127627

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

To improve the corrosion resistance of plasma sprayed ZrO2 coated C-f/Mg composites, the pores on the ZrO2 coating were sealed with the SiO2 coating prepared by sol-gel technology. The surface porosity of the ZrO2 coating was reduced by 65.47% after the SiO2 sealing treatment. The electrochemical results demonstrated that the corrosion potential was significantly improved by 44.61% after the SiO2 sealing treatment. The corrosion current density was degraded from 1.94 x 10(-5) A.cm(-2) to 2.37 x 10(-6) A.cm(-2), and the corrosion rate was even reduced by nearly 10 times. Besides, the contact angle of the corrosive solution on the coating was raised from 45.3 degrees to 72.4 degrees after the sealing treatment. The good corrosion resistance after the sealing treatment is ascribed to the dense structure and the improved hydrophobicity of the SiO2 sealing layer, which provide an effective barrier to block the penetration of corrosive solution for C-f/Mg composites.

引用

页数：13

共 50 条

[41] Corrosion behavior of ZrO2 and YSZ in molten FLiNaK salt
Esquivel-Medina, S.
Espinoza-Perez, L. J.
Lopez-Honorato, Eddie
MRS ADVANCES, 2022, 7 (2-3) : 19 - 23
[42] Effect of laser remelting on corrosion behavior of plasma-sprayed Ni-coated WC coatings
Xie Guozhi
Zhang Jingxian
Lu Yijun
Wang Keyu
Mo Xiangyin
Lin Pinghua
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 460 : 351 - 356
[43] MICROSTRUCTURE　OF　NiCoCrAlY　COMPONENT　IN　PLASMA　SPRAYED　ZrO2/NiCoCrAlY　GRADED　COATING
Xiang Xinghua
Transactions of Nonferrous Metals Society of China, 1997, (01) : 107 - 111
[44] Microstructure of NiCoCrAlY component in plasma sprayed ZrO2/NiCoCrAlY graded coating
Xiang, XH
Zhu, JC
Yin, ZD
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 1997, 7 (01) : 106 - 110
[45] Optimization of Process Parameters for Plasma Sprayed HA/ZrO2 Bioceramic Coating
Bao, Yumei
Wu, Lei
Weng, Lijie
ADVANCED MATERIALS AND ENGINEERING APPLICATIONS, 2012, 161 : 269 - +
[46] Microstructural characteristics in plasma sprayed functionally graded ZrO2/NiCrAl coatings
Pan, CX
Xu, XR
SURFACE & COATINGS TECHNOLOGY, 2003, 162 (2-3): : 194 - 201
[47] EFFECT OF CARBON NANOTUBES ON THE PROPERTIES OF SPARK PLASMA SINTERED ZrO2/CNT COMPOSITES
Shim, D. H.
Jung, S. S.
Kim, H. S.
Cho, H.
Kim, J. K.
Kim, T. G.
Yoon, S. J.
ARCHIVES OF METALLURGY AND MATERIALS, 2015, 60 (02) : 1315 - 1318
[48] Effect of carbon nanotubes on the properties of spark plasma sintered ZrO2/CNT composites
Shim, D.H.
Jung, S.S.
Kim, H.S.
Cho, H.
Kim, J.K.
Kim, T.G.
Yoon, S.J.
Archives of Metallurgy and Materials, 2015, 60 (2B) : 1315 - 1318
[49] Thermal shock endurance of porous steel with plasma sprayed ZrO2 coating
Kurushima, T.
Ishizaki, K.
Harada, R.
1600, Marcel Dekker Inc, New York, NY, United States (09):
[50] A study in the high temperature tribological characteristics of the plasma sprayed ZrO2 coating
Song, YS
Han, JC
Park, MH
Ro, BH
Lee, KH
Byun, ES
Sasaki, S
THERMAL SPRAY, VOLS 1 AND 2: MEETING THE CHALLENGES OF THE 21ST CENTURY, 1998, : 225 - 229

← 1 2 3 4 5 →