Analysis of Dynamic Contact Mechanical Response and Contact Life of Low Speed Spur Gear

被引：0
|
作者：
Xin, Yangyang [1 ]
Chen, Yunxia [1 ]
Rui, Kan [1 ]
Wu, Jiyu [2 ]
机构：
[1] Beihang Univ, Dept Reliabil & Syst Engn, Beijing, Peoples R China
[2] Pera Global Polytron Technol Inc, Beijing 10091, Peoples R China
来源：
2015 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING AND ENGINEERING MANAGEMENT (IEEM) | 2015年
关键词：
Gear pair; contact; transient dynamics; friction; fatigue life;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The dynamic response of contact mechanics has significance important for durability and reliability design of gears. A finite element analysis model for dynamic response of contact mechanics of gear pair is established, and then the contact fatigue life of gear pair is analyzed based on the finite element model. The key parameters of contact finite element model is determined through the contact finite element analysis of thin cylinder. The precise finite element analysis model of the gear meshing is established and calculated by transient dynamics. The contact force and contact stress of different position is obtained. Through change friction coefficient of finite element model, the influence of friction coefficient for contact force and contact stress is obtained. Comparing the life of traditional risk point calculated in most of the standard and dangerous point which has the max stress through simulation. The influence of friction coefficient on contact life is determined.
引用
收藏
页码：686 / 690
页数：5
相关论文
共 50 条
  • [1] Contact dynamic modeling and corner contact analysis of the spur gear pair with pitch deviations
    Luo, Yuankui
    Xu, Lixin
    MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2025, 227
  • [2] Dynamic contact behavior of asymmetric spur gear
    Puneeth, M. L.
    Mallesh, G.
    MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 2019 - 2027
  • [3] An analytical study of the effect of the contact ratio on the spur gear dynamic response
    Andersson, A
    JOURNAL OF MECHANICAL DESIGN, 2000, 122 (04) : 508 - 514
  • [4] Contact fatigue life on spur gear with consideration of elastohydrodynamic
    Hu, Yun (hyfatigue@163.com), 1600, Central South University of Technology (45):
  • [5] CONTACT DEFORMATION OF SPUR GEAR TEETH
    AIRAPETO.EL
    RUSSIAN ENGINEERING JOURNAL-USSR, 1967, 47 (01): : 32 - &
  • [6] A tribo-dynamic contact fatigue model for spur gear pairs
    Li, Sheng
    Anisetti, Anusha
    INTERNATIONAL JOURNAL OF FATIGUE, 2017, 98 : 81 - 91
  • [7] Tooth dynamic contact simulation and experimental validation of involute spur gear
    Liu, Yanping
    He, Xiaohui
    Zhao, Yongqiang
    Liu, Ming
    2019 2ND WORLD CONFERENCE ON MECHANICAL ENGINEERING AND INTELLIGENT MANUFACTURING (WCMEIM 2019), 2019, : 178 - 185
  • [8] Bearing contact analysis of the involute spur planetary gear train
    Chen, JL
    Tseng, CH
    Tsay, CB
    TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING, 2001, 25 (02) : 163 - 190
  • [9] STRESS-ANALYSIS OF SPUR GEAR IN CONSIDERATION OF THE RATIO OF CONTACT
    TANAKA, M
    KOHIDA, H
    BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1985, 28 (243): : 2128 - 2135
  • [10] STRESS ANALYSIS OF SPUR GEAR IN CONSIDERATION OF THE RATIO OF CONTACT.
    Tanaka, Michihiko
    Kohida, Hiroyuki
    Bulletin of the JSME, 1985, 28 (243): : 2128 - 2135
12345