LOCAL EXPERIMENTAL HEAT TRANSFER OF SINGLE-PHASE PULSATING FLOW IN A SQUARE MINI-CHANNEL

被引:0
|
作者
Mehta, Balkrishna [1 ]
Khandekar, Sameer [1 ]
机构
[1] Indian Inst Technol, Dept Mech Engn, Kanpur 208016, Uttar Pradesh, India
关键词
CIRCULAR TUBE; LAMINAR-FLOW; VELOCITY; PIPE; GRADIENT;
D O I
暂无
中图分类号
O414.1 [热力学];
学科分类号
摘要
Disturbing the flow with a particular pulsating frequency alters the thermal and hydrodynamic boundary layer thus affecting the inter-particle momentum and energy exchange. Due to this enhanced mixing, augmentation in the heat transfer is expected. Obviously, the parameters like pulsating frequency vis-a-vis viscous time scales and the imposed pulsating amplitude will play an important role in the enhancement of the heat transfer. Several numerical heat transfer and fluid flow studies on pulsating flows have been reported in the literature but the conclusions are not coherent. Lack of experimental study in hydrodynamics as well as in heat transfer of laminar pulsating flows attracts to revisit this problem especially, in mini-channels. Technological developments in measurement and instrumentation have enabled to experimentally investigate the thermo-hydrodynamic study of laminar pulsating flows in mini-channels as an augmentation technique for heat transfer. In this work, we have undertaken the experimental measurements of heat transfer of single-phase laminar pulsating flow in square mini-channel of cross-section 3 mm x 3 mm The study is done at two different pulsating frequency 0.05Hz and 1Hz (Womersley number, Wo = 0.8 and 3.4 respectively). These two values are chosen because velocity profile exhibits different characteristic for Wo > 1(annular effect, i.e., peak velocity near the wall) and Wo < 1(conventional parabolic profile). The heat transfer study has been done in a square channel of made on polycarbonate sheet with one side heating. Heater (made of SS, 70 microns thin strip, negligible thermal inertia) itself is one of the walls of the square channel making constant heat flux thermal condition and its instantaneous temperature is measured by using pre-calibrated InfraRed camera. Fluid bulk mean temperature has been determined by energy balance and one K-type thermocouple is also placed in the fluid at the outlet cross-section. By using these temporal data, space averaged instantaneous Nusselt number has been obtained. It is observed that for measured frequency range, the overall enhancement in the heat transfer is not attractive for laminar pulsating flow in comparison to steady flow of same time-averaged flow Reynolds number. It is found that the change in species transport is either marginal or highly limited and is primarily occurring in the developing length of the channel/plate. Enhancement of species transport due to such periodic pulsatile internal flows, over and above the nonpulsatile regular flow conditions, is questionable, and at best, rather limited.
引用
收藏
页数:7
相关论文
共 50 条
  • [21] Flow condensation heat transfer on surfaces with different wettability in mini-channel
    Yuan J.
    Wang Y.
    Hu H.
    Yu X.
    Xu J.
    Huagong Xuebao/CIESC Journal, 2018, 69 (10): : 4156 - 4166
  • [22] Research on the flow boiling and heat transfer of ethanol in a corrugated mini-channel
    Chang, Wei
    Zhang, Shusheng
    Tian, Shuai
    Huo, Mengjia
    MECHANICAL, MATERIALS AND MANUFACTURING ENGINEERING, PTS 1-3, 2011, 66-68 : 876 - 881
  • [23] Development of flow in a square mini-channel: Effect of flow oscillation
    Lobo, Oswald Jason
    Chatterjee, Dhiman
    PHYSICS OF FLUIDS, 2018, 30 (04)
  • [24] Experimental Study of Single Phase Flow in a Closed-Loop Cooling System with Integrated Mini-Channel Heat Sink
    Ma, Lei
    Zhao, Xuxin
    Sun, Hongyuan
    Wu, Qixing
    Liu, Wei
    ENTROPY, 2016, 18 (06)
  • [25] Experimental and simulation study of flow and heat transfer characteristics of the leaf-veined mini-channel heat sink
    Cao, Weixue
    Shao, Tianqi
    Zhang, Xudong
    Zhang, Yixuan
    Wang, Yongzhen
    Heat and Mass Transfer/Waerme- und Stoffuebertragung, 2025, 61 (04):
  • [26] Numerical study on enhanced heat transfer and flow characteristics of supercritical methane in a square mini-channel with dimple array
    Chen, Yanjun
    Liu, Zhenhua
    He, Deqiang
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2020, 158
  • [27] Study on Flow Boiling Heat Transfer and Two-Phase Flow Pressure Drop in Flat Mini-Channel
    Koizumi, Yasuo
    Ohtake, Hiroyasu
    Sato, Ken
    ICONE17, VOL 4, 2009, : 403 - 410
  • [28] A NUMERICAL STUDY OF FLOW BOILING HEAT TRANSFER OF NANOEMULSION IN MINI-CHANNEL HEAT EXCHANGER
    Xu, Jiajun
    Acar, Musa
    Poudel, Naresh
    Rios, Jaime
    Tran, Thanh N.
    PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION SUMMER MEETING, 2018, VOL 2, 2018,
  • [29] Size effect on single-phase channel flow and heat transfer at microscale
    Guo, ZY
    Li, ZX
    INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2003, 24 (03) : 284 - 298
  • [30] Experimental and numerical study on heat transfer performance of single-phase water in a horizontal mini-annular channel
    Yang, Yang
    Yuan, Xiaofeng
    Li, Zhijun
    INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2024, 108