Experimental study on 30 kW wind turbine/10kW diesel engine hybrid system in Vietnam

被引：0
|
作者：
Shimizu, Y [1 ]
Maeda, T [1 ]
Kamada, Y [1 ]
Yamamoto, N [1 ]
Niwa, A [1 ]
Loc, ND [1 ]
Tomita, T [1 ]
机构：
[1] Mie Univ, Dept Mech Engn, Tsu, Mie 5148507, Japan
来源：
PROCEEDINGS OF THE INTERNATIONAL AGRICULTURAL ENGINEERING CONFERENCE | 2000年
关键词：
wind turbine; diesel engine; hybrid power;
D O I：
暂无
中图分类号：
S2 [农业工程];
学科分类号：
0828 ;
摘要：
In this study, a hybrid power system for the area without a grid connection is developed. The hybrid power system developed in this study can supply 5kW electric power with both wind energy and diesel power. The test turbine is a 3 bladed horizontal axis wind turbine. The rotor diameter is 10m. The maximum output is 30kW. The output control system is full-span pitch control. The rotor is high efficiency type with a special blade tip, Mie-vane. It increases the rotor output 10%-20% compare to the rotor without Mie-vane. A diesel power is used to supply the power to make up a deficit in weak wind. This hybrid system is installed in coastal area near Hanoi for feasibility studies. In this paper, the detail of hybrid system and operational data are shown.
引用
下载
收藏
页码：35 / 41
页数：7
相关论文
共 50 条
  • [41] SERVERS POWERED BY A 10KW IN-RACK PROTON EXCHANGE MEMBRANE FUEL CELL SYSTEM
    Zhao, Li
    Brouwer, Jacob
    James, Sean
    Siegler, John
    Peterson, Eric
    Kansa, Aman
    Liu, Jie
    PROCEEDINGS OF THE ASME 12TH FUEL CELL SCIENCE, ENGINEERING AND TECHNOLOGY CONFERENCE, 2014, 2014,
  • [42] In-situ Ambient Vibration Study of a 900-kw Wind Turbine
    Prowell, Ian
    Elgamal, Ahmed
    Luco, J. Enrique
    Conte, Joel P.
    JOURNAL OF EARTHQUAKE ENGINEERING, 2021, 25 (14) : 2971 - 2992
  • [43] A 10kW Transformer with A Novel Cooling Structure of A Contactless Power Transfer System for Electric Vehicles
    Fujita, Itaru
    Yamanaka, Tomohiro
    Kaneko, Yasuyoshi
    Abe, Shigeru
    Yasuda, Tomio
    2013 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE), 2013, : 3643 - 3650
  • [44] Simulation of a 220 kW hybrid SOFC gas turbine system and data comparison
    Yi, YF
    Smith, TP
    Brouwer, J
    Rao, AD
    Samuelsen, GS
    SOLID OXIDE FUEL CELLS VIII (SOFC VIII), 2003, 2003 (07): : 1442 - 1454
  • [45] Experimental study on the performance of 15 kW OTEC system
    Chen, Fengyun
    Zhang, Liang
    Liu, Weimin
    Liu, Lei
    Peng, Jingping
    ADVANCES IN ENERGY, ENVIRONMENT AND MATERIALS SCIENCE, 2016, : 49 - 52
  • [46] Analysis of Dynamic Characteristics of a 600 kW Storage Type Wind Turbine with Hybrid Hydraulic Transmission
    Liu, Zengguang
    Tao, Yanhua
    Wei, Liejiang
    Zhan, Peng
    Yue, Daling
    PROCESSES, 2019, 7 (07)
  • [47] Mechanical Strength of 10 kW Wind Turbine Blade Utilize Glass Fiber Reinforced Plastic
    Mangestiyono, Wiji
    Setyoko, Bambang
    Tadeus, Dista Yoel
    Yuniarto
    MATERIALS TODAY-PROCEEDINGS, 2019, 13 : 71 - 75
  • [48] Analysis of a Composite Blade Design for 10 kW Wind Turbine Using a Finite Element Model
    Gutu, Marin
    ENGINEERING SOLUTIONS AND TECHNOLOGIES IN MANUFACTURING, 2014, 657 : 589 - 593
  • [49] Modeling and Control of a 600 kW Closed Hydraulic Wind Turbine with an Energy Storage System
    Wei, Liejiang
    Liu, Zengguang
    Zhao, Yuyang
    Wang, Gang
    Tao, Yanhua
    APPLIED SCIENCES-BASEL, 2018, 8 (08):
  • [50] Aerodynamic design and analysis of a 10 kW horizontal-axis wind turbine for Tainan, Taiwan
    Chi-Jeng Bai
    Po-Wei Chen
    Wei-Cheng Wang
    Clean Technologies and Environmental Policy, 2016, 18 : 1151 - 1166
12345