Effect of γ-Aminopropyltriethoxy Silane (γ-APS) Coupling Agent on Mechanical and Morphological Properties of High Density Polyethylene (HDPE)/Acrylonitrile Butadiene Rubber (NBR)/Palm Pressed Fibre (PPF) Composites

The fabrication of High Density Polyethylene (HDPE)/Acrylonitrile-butadiene rubber (NBR)/Palm Pressed Fibre (PPF) composite were investigated. The effect of gamma-Aminopropyltriethoxy Silane (APS) as coupling agent on the properties of HDPE/NBR/PPF composite were studied. The composites were melt mixed using heated two roll mill at 180 degrees C and speed of 15rpm with six different loading (100/0/10, 80/20/10, 70/30/10, 60/40/10, 50/50/10, and 40/60/10). The effects of gamma-APS silane on mechanical, and morphological properties were examined using universal tensile machine (UTM) and scanning electron microscopy (SEM), respectively. Tensile strength and Young's modulus of HDPE/NBR/PPF composites decrease with increasing of NBR loading, whilst increasing the elongation at break. However, treated composites have resulted 3% to 29%, and 9% to 19%, higher in tensile strength and young's modulus compared to untreated composites. This was due to the better adhesion between HDPE/NBR matrices and PPF filler with the presence of silanol moieties. From the morphological study, the micrograph of treated composites has proved the well bonded and good attachment of PPF filler with HDPE/NBR matrices which resulted to better tensile strength to the HDPE/NBR/PPF composites.