INVESTIGATION OF FAST PYROLYSIS OF BRASSICA CARINATA IN AN AUGER TYPE REACTOR

被引:0
|
作者
Sonnek, William D. [1 ]
Gent, Stephen P. [1 ]
Michna, Gregory J. [1 ]
机构
[1] S Dakota State Univ, Dept Mech Engn, Brookings, SD 57007 USA
来源
PROCEEDINGS OF THE ASME 9TH INTERNATIONAL CONFERENCE ON ENERGY SUSTAINABILITY, 2015, VOL 1 | 2016年
关键词
OIL;
D O I
暂无
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Fast pyrolysis is one method of creating bio-oil from biomass such as native prairie grasses, corn stover, and other organic commercial and industrial byproducts. In this study, fast pyrolysis of Brassica carinata meal, or simply carinata meal, was performed in an auger-type reactor. The bio-oil produced in the reactor was collected and analyzed to determine the effects of reactor and condenser temperatures on the properties of the bio-oil produced. Five reactor temperatures and two condenser temperatures were investigated in this research. The rheological properties of the bio-oil samples were analyzed, water content was determined with the Karl Fisher method, energy content was measured with a bomb calorimeter, and acidity was determined using a total acid titration test. The aging characteristics of the bio-oil were also investigated at seven days, fourteen days, and twenty-eight days after the oil was created to determine what effect, if any, time had on the its properties. Preliminary results indicate that any reactor temperature above 500 degrees C produces bio-oils of similar composition, although with changes in yield. In addition, the short-term aging results of the bio-oils have shown insignificant changes in total acid number, water content, and energy content.
引用
收藏
页数:7
相关论文
共 50 条
  • [31] Microwave pyrolysis of textile dyeing sludge in a continuously operated auger reactor
    Zhang, Hedong
    Gao, Zuopeng
    Ao, Wenya
    Li, Jing
    Liu, Guangqing
    Fu, Jie
    Ran, Chunmei
    Liu, Yang
    Kang, Qinhao
    Mao, Xiao
    Dai, Jianjun
    FUEL PROCESSING TECHNOLOGY, 2017, 166 : 174 - 185
  • [32] FAST PYROLYSIS OF SAWDUST IN AN ENTRAINED FLOW REACTOR
    BITOWFT, B
    ANDERSSON, LA
    BJERLE, I
    FUEL, 1989, 68 (05) : 561 - 566
  • [33] Production and Characterization of Pyrolysis Oil from Sawmill Residues in an Auger Reactor
    Papari, Sadegh
    Hawboldt, Kelly
    Helleur, Robert
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2017, 56 (08) : 1920 - 1925
  • [34] The Production of Engineered Biochars in a Vertical Auger Pyrolysis Reactor for Carbon Sequestration
    Brassard, Patrick
    Godbout, Stephane
    Raghavan, Vijaya
    Palacios, Joahnn H.
    Grenier, Michele
    Zegan, Dan
    ENERGIES, 2017, 10 (03)
  • [35] Mechanistic Investigation into Bed Agglomeration during Biomass Fast Pyrolysis in a Fluidized-Bed Reactor
    Burton, Alan
    Wu, Hongwei
    ENERGY & FUELS, 2012, 26 (11) : 6979 - 6987
  • [36] Proteome-level investigation of Brassica carinata-derived resistance to Leptosphaeria maculans
    Subramanian, B
    Bansal, VK
    Kav, NNV
    JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY, 2005, 53 (02) : 313 - 324
  • [37] Fast Pyrolysis of Municipal Green Waste in an Auger Reactor: Effects of Residence Time and Particle Size on the Yield and Characteristics of Produced Oil
    Hasan, M. M.
    Rasul, M. G.
    Jahirul, M. I.
    Khan, M. M. K.
    ENERGIES, 2024, 17 (12)
  • [38] Fast pyrolysis of Beauty Leaf Fruit Husk (BLFH) in an auger reactor: Effect of temperature on the yield and physicochemical properties of BLFH oil
    Hasan, M. M.
    Rasul, M. G.
    Ashwath, N.
    Khan, M. M. K.
    Jahirul, M. I.
    RENEWABLE ENERGY, 2022, 194 : 1098 - 1109
  • [39] Pyrolysis of biomass in a laboratory pyrolysis unit with a screw type reactor and a secondary decomposition reactor
    Institute of Chemical and Environmental Engineering, Slovak University of Technology, Bratislava
    81237, Slovakia
    Sustainable Envir. Res., 5 (261-266):
  • [40] Demonstration of the waste tire pyrolysis process on pilot scale in a continuous auger reactor
    Daniel Martinez, Juan
    Murillo, Ramon
    Garcia, Tomas
    Veses, Alberto
    JOURNAL OF HAZARDOUS MATERIALS, 2013, 261 : 637 - 645