Experimental and Numerical Optimization of Beam Shapes for Short-Pulse Ultraviolet Laser Cutting Processing

被引：11
|
作者：
Sotnikov, Anatoly [1 ]
Laux, Harald [1 ]
Stritzker, Bernd [2 ]
机构：
[1] OSRAM Opto Semicond GmbH, Leibnizstr 4, D-93055 Regensburg, Germany
[2] Univ Augsburg, Inst Phys, D-86159 Augsburg, Germany
来源：
LASER ASSISTED NET SHAPE ENGINEERING 6, PROCEEDINGS OF THE LANE 2010, PART 1 | 2010年 / 5卷
关键词：
process optimization; laser-based cutting of silicon; laser cutting simulation;
D O I：
10.1016/j.phpro.2010.08.130
中图分类号：
O59 [应用物理学];
学科分类号：
摘要：
In this work the effect of elliptical beam shapes on cutting performance of silicon is studied experimentally using a Diode Pumped Solid State Q-switched UV laser operating at the wavelength of 355 nm. Elliptical beams are investigated by varying scanning speed, repetition rate and average output power. It is shown that a short elliptical beam with 6 x 230 mu m dimension forms a deeper groove at higher cutting speed and lower average output power compared to a longer elliptical beam. A numerical model of the laser cutting process is also described. Some validation results for single and multi-pulse cutting are shown. (C) 2010 Published by Elsevier B.V.
引用
收藏
页码：137 / 146
页数：10
相关论文
共 50 条
  • [1] Short-pulse laser processing of CFRP
    Weber, Rudolf
    Freitag, Christian
    Kononenko, Taras V.
    Hafner, Margit
    Onuseit, Volkher
    Berger, Peter
    Graf, Thomas
    LASER ASSISTED NET SHAPE ENGINEERING 7 (LANE 2012), 2012, 39 : 137 - 146
  • [2] Short-pulse ultraviolet laser ablation of ceramic
    Fang, Xiaodong
    Li, Guangyin
    Yu, Yinshan
    Yingyong Jiguang/Applied Laser Technology, 1996, 16 (02): : 77 - 78
  • [3] Short-pulse laser processing of nanostructured materials
    Yakovlev, VV
    Aita, C
    Gajdardziska-Josifovska, M
    Magyar, J
    Sklyarov, A
    Mikhaylichenko, K
    HIGH-POWER LASER ABLATION IV, PTS 1 AND 2, 2002, 4760 : 175 - 184
  • [4] Optimization of a beam delivery system for a short-pulse KrF laser used for material ablation
    Dainesi, P
    Ihlemann, J
    Simon, P
    APPLIED OPTICS, 1997, 36 (27) : 7080 - 7085
  • [5] Experimental and numerical analysis of short-pulse laser interaction with tissue phantoms containing inhomogeneities
    Das, C
    Trivedi, A
    Mitra, K
    Vo-Dinh, T
    APPLIED OPTICS, 2003, 42 (25) : 5173 - 5180
  • [6] SHORT-PULSE ULTRAVIOLET FIBER RAMAN LASER PUMPED BY A XECL EXCIMER LASER
    MIZUNAMI, T
    MIYAZAKI, T
    TAKAGI, K
    JOURNAL OF THE OPTICAL SOCIETY OF AMERICA B-OPTICAL PHYSICS, 1987, 4 (04) : 498 - 504
  • [7] Optimization of the output beam homogeneity of short-pulse KrF amplifiers
    Feuerhake, M
    Simon, P
    Almasi, G
    Nagy, T
    Szatmari, S
    APPLIED OPTICS, 1997, 36 (18): : 4094 - 4098
  • [8] Industrial applications of ultrahigh precision short-pulse laser processing
    Liu, XB
    Photon Processing in Microelectronics and Photonics IV, 2005, 5713 : 372 - 386
  • [9] SHORT-PULSE IODINE LASER
    BASOV, NG
    ZUEV, VS
    NUOVO CIMENTO DELLA SOCIETA ITALIANA DI FISICA B-GENERAL PHYSICS RELATIVITY ASTRONOMY AND MATHEMATICAL PHYSICS AND METHODS, 1976, 31 (01): : 129 - 151
  • [10] Short-pulse laser machining
    不详
    OPTICS AND LASER TECHNOLOGY, 1996, 28 (07): : R3 - R3
12345