The effects of secondary elemental Mo or Ti addition in Al0.3CoCrFeNi high-entropy alloy on age hardening at 700°C

被引：142
|
作者：
Shun, Tao-Tsung [1 ]
Hung, Cheng-Hsin [1 ]
Lee, Che-Fu [1 ]
机构：
[1] Feng Chia Univ, Dept Mat Sci & Engn, Taichung 407, Taiwan
来源：
JOURNAL OF ALLOYS AND COMPOUNDS | 2010年 / 495卷 / 01期
关键词：
High-entropy alloy; Enthalpy; Microstructure; Crystal structure; Transmission electron microscopy; MICROSTRUCTURE; BEHAVIORS; SYSTEM;
D O I：
10.1016/j.jallcom.2010.02.032
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
Three FCC structured high-entropy alloys of Al0.3CoCrFeNi, Al0.3CoCrFeNiMo0.1, and Al0.3CoCrFeNiTi0.1 were synthesized in order to investigate the effects of secondary elemental Mo or Ti addition in Al-0.3 CoCrFeNi alloy on age hardening at 700 degrees C. All of the three alloys exhibited an apparent age hardening, especially when secondary elements were added. The hardness of the Al0.3CoCrFeNi alloy was increased by 65% after aging, whereas the other two alloys displayed an increase of over 80%. The Al0.3CoCrFeNi and Al0.3CoCrFeNiTi0.1 alloys were hardened by massive (Ni,Al)-rich and (Ni,Co,Ti)-rich B2 ordered precipitates, respectively. The large age hardening of the Al0.3CoCrFeNiMo0.1 alloy is attributed to the precipitation of both fine (Ni,Al)-rich phase and heavy blocky (Cr,Mo)(Co,Fe,Ni) sigma phase. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码：55 / 58
页数：4
相关论文
共 50 条
  • [31] Effect of B Addition on Microstructure and Properties of As-cast Al0.3CoCrFeNi High Entropy Alloy
    Li, Rongbin
    Zou, Chuanle
    Zhang, Zhixi
    Zhang, Rulin
    Peng, Wangjun
    RARE METAL MATERIALS AND ENGINEERING, 2023, 52 (02) : 667 - 674
  • [32] Additive manufacturing of Al0.3CoCrFeNi high-entropy alloy by powder feeding laser melting deposition
    Peng, Haoping
    Xie, Siyao
    Niu, Pengda
    Zhang, Zhijian
    Yuan, Tiechui
    Ren, Zhiqiang
    Wang, Xiaoming
    Zhao, Yang
    Li, Ruidi
    JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 862
  • [33] Characterization of hot deformation behavior of Al0.3CoCrFeNi high-entropy alloy and development of processing map
    Patnamsetty, Madan
    Ghosh, Sumit
    Somani, Mahesh C.
    Peura, Pasi
    JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 914
  • [34] Selective Laser Melting of Al0.3CoCrFeNi High-Entropy Alloy: Printability, Microstructure, and Mechanical Properties
    Florian Peyrouzet
    Dorian Hachet
    Romain Soulas
    Christelle Navone
    Stéphane Godet
    Stéphane Gorsse
    JOM, 2019, 71 : 3443 - 3451
  • [35] Cyclic degradation mechanisms of Al0.3CoCrFeNi high-entropy alloy under different loading rates
    Luo, Rong
    Wang, Bing
    Wang, Qian
    Yu, Jiaxin
    Gao, Zhiming
    Materials Today Communications, 2024, 38
  • [36] Effect of B Addition on Microstructure and Properties of As-cast Al0.3CoCrFeNi High Entropy Alloy
    Li, Rongbin
    Zou, Chuanle
    Zhang, Zhixi
    Zhang, Rulin
    Peng, Wangjun
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2023, 52 (02): : 667 - 674
  • [37] High-velocity deformation of Al0.3CoCrFeNi high-entropy alloy: Remarkable resistance to shear failure
    Li, Z.
    Zhao, S.
    Diao, H.
    Liaw, P. K.
    Meyers, M. A.
    SCIENTIFIC REPORTS, 2017, 7
  • [38] High-velocity deformation of Al0.3CoCrFeNi high-entropy alloy: Remarkable resistance to shear failure
    Z. Li
    S. Zhao
    H. Diao
    P. K. Liaw
    M. A. Meyers
    Scientific Reports, 7
  • [39] Microstructures with extraordinary dynamic work hardening and strain rate sensitivity in Al0.3CoCrFeNi high entropy alloy
    Gangireddy, Sindhura
    Gwalani, Bharat
    Liu, Kaimiao
    Banerjee, Rajarshi
    Mishra, Rajiv S.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 734 : 42 - 50
  • [40] Microstructure and tensile behaviors of FCC Al0.3CoCrFeNi high entropy alloy
    Shun, Tao-Tsung
    Du, Yu-Chin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 479 (1-2) : 157 - 160
12345