The effects of secondary elemental Mo or Ti addition in Al0.3CoCrFeNi high-entropy alloy on age hardening at 700°C

被引:142
|
作者
Shun, Tao-Tsung [1 ]
Hung, Cheng-Hsin [1 ]
Lee, Che-Fu [1 ]
机构
[1] Feng Chia Univ, Dept Mat Sci & Engn, Taichung 407, Taiwan
关键词
High-entropy alloy; Enthalpy; Microstructure; Crystal structure; Transmission electron microscopy; MICROSTRUCTURE; BEHAVIORS; SYSTEM;
D O I
10.1016/j.jallcom.2010.02.032
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Three FCC structured high-entropy alloys of Al0.3CoCrFeNi, Al0.3CoCrFeNiMo0.1, and Al0.3CoCrFeNiTi0.1 were synthesized in order to investigate the effects of secondary elemental Mo or Ti addition in Al-0.3 CoCrFeNi alloy on age hardening at 700 degrees C. All of the three alloys exhibited an apparent age hardening, especially when secondary elements were added. The hardness of the Al0.3CoCrFeNi alloy was increased by 65% after aging, whereas the other two alloys displayed an increase of over 80%. The Al0.3CoCrFeNi and Al0.3CoCrFeNiTi0.1 alloys were hardened by massive (Ni,Al)-rich and (Ni,Co,Ti)-rich B2 ordered precipitates, respectively. The large age hardening of the Al0.3CoCrFeNiMo0.1 alloy is attributed to the precipitation of both fine (Ni,Al)-rich phase and heavy blocky (Cr,Mo)(Co,Fe,Ni) sigma phase. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码:55 / 58
页数:4
相关论文
共 50 条
  • [1] Hardening-softening of Al0.3CoCrFeNi high-entropy alloy under nanoindentation
    Guo, Qingwei
    Hou, Hua
    Pan, Yue
    Pei, Xiaolong
    Song, Zhuo
    Liaw, Peter K.
    Zhao, Yuhong
    MATERIALS & DESIGN, 2023, 231
  • [2] Nanoindentation Creep Behavior of an Al0.3CoCrFeNi High-Entropy Alloy
    Zhang, Lijun
    Yu, Pengfei
    Cheng, Hu
    Zhang, Huan
    Diao, Haoyan
    Shi, Yunzhu
    Chen, Bilin
    Chen, Peiyong
    Feng, Rui
    Bai, Jie
    Jing, Qin
    Ma, Mingzhen
    Liaw, P. K.
    Li, Gong
    Liu, Riping
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2016, 47A (12): : 5871 - 5875
  • [3] Annealing effect for the Al0.3CoCrFeNi high-entropy alloy fibers
    Li, Dongyue
    Gao, Michael C.
    Hawk, Jeffrey A.
    Zhang, Yong
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 778 : 23 - 29
  • [4] Nanoindentation Creep Behavior of an Al0.3CoCrFeNi High-Entropy Alloy
    Lijun Zhang
    Pengfei Yu
    Hu Cheng
    Huan Zhang
    Haoyan Diao
    Yunzhu Shi
    Bilin Chen
    Peiyong Chen
    Rui Feng
    Jie Bai
    Qin Jing
    Mingzhen Ma
    P. K. Liaw
    Gong Li
    Riping Liu
    Metallurgical and Materials Transactions A, 2016, 47 : 5871 - 5875
  • [5] The Precipitation Behavior in Al0.3CoCrFeNi High-Entropy Alloy Affected by Deformation and Annealing
    Zhang, Jinlong
    Qiu, Risheng
    Tan, Xinu
    Quan, Xuantong
    Song, Bo
    Liu, Qing
    METALS, 2023, 13 (01)
  • [6] High-Strength Behavior of the Al0.3CoCrFeNi High-Entropy Alloy Single Crystals
    Kireeva, Irina, V
    Chumlyakov, Yuriy, I
    Pobedennaya, Zinaida, V
    Vyrodova, Anna V.
    Saraeva, Anastasia A.
    METALS, 2020, 10 (09) : 1 - 11
  • [7] Influence of mechanically activated annealing on phase evolution in Al0.3CoCrFeNi high-entropy alloy
    Rahul John
    Anirudha Karati
    Mohan Muralikrishna Garlapati
    Mayur Vaidya
    Rahul Bhattacharya
    Daniel Fabijanic
    B. S. Murty
    Journal of Materials Science, 2019, 54 : 14588 - 14598
  • [8] Insight into the kinetic stabilization of Al0.3CoCrFeNi high-entropy alloys
    Anber, Elaf A.
    Lang, Andrew C.
    Lass, Eric A.
    Suri, Pranav Kumar
    Hart, James L.
    D'Antuono, Daniel Scotto
    Diao, Haoyan
    Feng, Rui
    Doherty, Roger
    Liaw, Peter K.
    Taheri, Mitra L.
    MATERIALIA, 2020, 14
  • [9] Hot Deformation and Subsequent Annealing on the Microstructure and Hardness of an Al0.3CoCrFeNi High-entropy Alloy
    Jun Wang
    Hongchao Li
    Haoxue Yang
    Yu Zhang
    William Yi Wang
    Jinshan Li
    Acta Metallurgica Sinica (English Letters), 2021, 34 : 1527 - 1536
  • [10] Microstructure Characterization of Al0.3CoCrFeNi High-Entropy Alloy with Pulsed Laser Surface Treatment
    Zhang Jinlong
    Qiu Risheng
    Tan Xinu
    Zhang Hui
    Chai Linjiang
    Bi Fengxian
    Liu Qing
    RARE METAL MATERIALS AND ENGINEERING, 2022, 51 (01) : 30 - 35