Conceptual design of the MGI system for JT-60SA

被引：1
|
作者：
Dibon, M. [1 ]
Nakamura, S. [2 ]
Matsunaga, G. [2 ]
Isayama, A. [2 ]
Phillips, G. [3 ]
Sozzi, C. [4 ]
Davis, S. [3 ]
机构：
[1] Max Planck Inst Plasma Phys, Boltzmannstr 2, D-85748 Garching, Germany
[2] Natl Inst Quantum & Radiol Sci & Technol, Naka, Ibaraki, Japan
[3] Fus Energy, Garching, Germany
[4] Ist Fis Plasma IFP CNR, Milan, Italy
来源：
FUSION ENGINEERING AND DESIGN | 2022年 / 176卷
关键词：
Massive gas injection; Disruption mitigation;
D O I：
10.1016/j.fusengdes.2022.113042
中图分类号：
TL [原子能技术]; O571 [原子核物理学];
学科分类号：
0827 ; 082701 ;
摘要：
Disruption mitigation is of high priority for future tokamaks like ITER and DEMO. Massive gas injection (MGI) has proven to be an effective method in medium size machines and will likely be part of future disruption mitigation systems. For further research, the large superconducting tokamak JT-60SA will be equipped with a MGI system as an experimental equipment. This system will consist of two in-vessel MGI valves, which are mounted in opposite segments of the machine, vacuum feed throughs, a gas preparation system and an industrial PLC for control. The MGI valves are a scaled version of the spring-driven valve used in ADSEX Upgrade with an internal gas reservoir of 815 cm(3), a maximum mitigation gas pressure of 6.5 MPa, a closing pressure of about 2 MPa, a nozzle diameter of 28 mm and an opening time below 2 ms. CFD simulations with common gas mixtures indicate a peak flow rate of 3.8 kg/s after 1.6 ms. The valve has a size of 140 mm x 110 mm x 292 mm. The gas preparation system allows easy and reproducible mixing of two gases by using an electronic pressure controller.
引用
收藏
页数：6
相关论文
共 50 条
  • [1] Conceptual Design of the JT-60SA Cryogenic System
    Lamaison, V.
    Beauvisage, J.
    Fejoz, P.
    Girard, S.
    Gonvalves, R.
    Gonde, R.
    Heloin, V.
    Michel, F.
    Hoa, C.
    Kamiya, K.
    Roussel, P.
    Vallet, J-C.
    Wanner, M.
    Yoshida, K.
    [J]. ADVANCES IN CRYOGENIC ENGINEERING, 2014, 1573 : 337 - 344
  • [2] Conceptual design of JT-60SA cryostat
    Shibama, Y. K.
    Sakurai, S.
    Masaki, K.
    Sukekawa, A. M.
    Kaminaga, A.
    Sakasai, A.
    Matsukawa, M.
    [J]. FUSION ENGINEERING AND DESIGN, 2008, 83 (10-12) : 1605 - 1609
  • [3] Conceptual design of superconducting magnet system for JT-60SA
    Yoshida, K.
    Kizu, K.
    Tsuchiya, K.
    Tamai, H.
    Matsukawa, M.
    Kikuchi, M.
    della Corte, A.
    Muzzi, L.
    Turtu, S.
    Zenobio, A. Di.
    Pizzuto, A.
    Portafaix, C.
    Nicollet, S.
    Lacroix, B.
    Decool, P.
    Duchateau, J-L.
    Zani, L.
    [J]. IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2008, 18 (02) : 441 - 446
  • [4] Conceptual design of magnet system for JT-60 super advanced (JT-60SA)
    Kizu, K.
    Tsuchiya, K.
    Ando, T.
    Sborchia, C.
    Masaki, K.
    Sakurai, S.
    Sukegawa, A. M.
    Tamai, H.
    Fujita, T.
    Matsukawa, M.
    Miura, Y.
    Kikuchi, M.
    [J]. IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2007, 17 (02) : 1348 - 1352
  • [5] Conceptual design status of the JT-60SA pellet launching system
    Lang, P. T.
    Nakano, T.
    Pegourie, B.
    Ploeckl, B.
    Sakurai, S.
    [J]. FUSION ENGINEERING AND DESIGN, 2017, 123 : 167 - 170
  • [6] Mechanical design of JT-60SA magnet system
    Tsuchiya, K.
    Suzuki, Y.
    Kizu, K.
    Yoshida, K.
    Tamai, H.
    Matsukawa, A.
    Dolgetta, N.
    Portafaix, C.
    Zani, L.
    Pizzuto, A.
    [J]. IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2008, 18 (02) : 208 - 211
  • [7] Technical design of NBI system for JT-60SA
    Ikeda, Y.
    Akino, N.
    Ebisawa, N.
    Hanada, M.
    Inoue, T.
    Honda, A.
    Kamada, M.
    Kawai, A.
    Kazawa, A.
    Kikuchi, K.
    Kikuchi, M.
    Komata, M.
    Matsukawa, M.
    Mogaki, K.
    Noto, K.
    Okano, F.
    Ohga, T.
    Oshima, K.
    Takenouchi, T.
    Tamai, H.
    Tanai, Y.
    Umeda, N.
    Usui, K.
    Watanabe, K.
    Yamazaki, H.
    [J]. FUSION ENGINEERING AND DESIGN, 2007, 82 (5-14) : 791 - 797
  • [8] Design of the superconducting coil system in JT-60SA
    Tsuchiya, K.
    Kizu, K.
    Ando, T.
    Tamai, H.
    Matsukawa, A.
    [J]. FUSION ENGINEERING AND DESIGN, 2007, 82 (5-14) : 1519 - 1525
  • [9] Conceptual design of laser transfer system of the JT-60SA Thomson scattering diagnostic
    Tojo, H.
    Hatae, T.
    Hamano, T.
    Itami, K.
    [J]. FUSION ENGINEERING AND DESIGN, 2017, 123 : 678 - 681
  • [10] A Flexible Pellet Injection System for the Tokamak JT-60SA: The Final Conceptual Design
    Lang, P. T.
    Nakano, T.
    Garzotti, L.
    Pegourie, B.
    Ploeckl, B.
    Sakurai, S.
    [J]. FUSION SCIENCE AND TECHNOLOGY, 2019, 75 (03) : 178 - 196
12345