Minimizing energy consumption in a U-shaped robotic assembly line

Manufacturing industries these days are more concerned about the energy consumption due to the increasing energy cost. It is observed that industries can achieve significant savings in the energy cost even when a small percentage of energy consumption is reduced. In a manufacturing industry, assembly fines are equipped with robots to perform the assembly tasks and there is a need for efficiently balancing the assembly line by reducing the energy consumption during the production phase. The authors could not find any research on optimizing enerp, consumption in U-shaped robotic assembly line systems to date. The objective of this paper is to propose an optimization models with an objective of minimizing the energy consumption in a U-shaped robotic assembly line when the number of workstations are fixed. Since the assembly line balancing problems falls under the category of NP-hard, an efficient bio inspired algorithm is implemented to solve the problem. The model proposed is very well applicable for automobile assembly line where robots are employed. The energy consumption is evaluated on the benchmark data and energy consumption obtained by the U-shaped robotic assembly line is compared with the energy consumption obtained with straight robotic assembly line. The cycle time of the layouts are also compared. The results obtained using this proposed model can be used for the decision making process in the industry. The paper also proposes an optimization model for minimizing the cycle time. The energy consumption of the assembly line when the cycle time is minimized is evaluated and presented.