Enhanced Torque Density of a Novel One-Axis Actively Positioned Single-Drive Bearingless Motor

被引：1

作者：

Srichiangsa, Theeraphong ^{[1
,2
]}

Oe, Rikuya ^{[1
]}

Sugimoto, Hiroya ^{[1
]}

Fujii, Yusuke ^{[1
]}

Kiyota, Kyohei ^{[1
]}

Chiba, Akira ^{[1
]}

机构：

[1] Tokyo Inst Technol, Elect & Elect Engn, Tokyo, Japan

[2] Sriracha Kasetsart Univ, Fac Engn, Sriracha Campus, Chon Buri, Thailand

来源：

2022 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE) | 2022年

关键词：

Active axial magnetic suspension force; bearingless motor; high flux density material; one-DOF; single-drive; supplementary winding; soft magnetic composite material (SMC); PRINCIPLE; DESIGN;

D O I：

10.1109/ECCE50734.2022.9947459

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

A novel one-axis actively positioned single-drive bearingless motor topology with enhanced torque density is presented. The torque density is improved as follows: (i) The lower stator core was eliminated to cancel negative motor torque. (ii) The upper stator core was made of soft magnetic composite material (SMC) and integrated with supplementary windings. (iv) Wide air-gap length was also adopted to avoid radial touchdown. (iii) High residual flux density (Br) material was adapted for the rotor permanent magnets (PM). Motor torque of the proposed machine was improved up to 23% compared to the initial design.

引用

页数：6

共 50 条

[21] Design of a Miniaturized Single-Drive Bearingless Motor
Rubio, Guilherme Cavalcante
Sugimoto, Hiroya
Chiba, Akira
2019 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE), 2019, : 5273 - 5280
[22] Principle of a Novel Single-Drive Bearingless Motor With Cylindrical Radial Gap
Sugimoto, Hiroya
Tanaka, Seiyu
Chiba, Akira
Asama, Junichi
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2015, 51 (05) : 3696 - 3706
[23] Development of a One-Axis Actively Regulated Bearingless Motor with a Repulsive Type Passive Magnetic Bearing
Asama, Junichi
Watanabe, Daisuke
Oiwa, Takaaki
Chiba, Akira
2014 INTERNATIONAL POWER ELECTRONICS CONFERENCE (IPEC-HIROSHIMA 2014 - ECCE-ASIA), 2014, : 988 - 993
[24] Reduction in Torque and Suspension Force Ripples of an Axial-Gap Single-Drive Bearingless Motor
Asama, Junichi
Takahashi, Kazumasa
Oiwa, Takaaki
Chiba, Akira
2016 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE), 2016,
[25] Design of a High-Speed Single-Drive Bearingless Motor
Sugimoto, Hiroya
Srichiangsa, Theeraphong
Chiba, Akira
2017 IEEE INTERNATIONAL ELECTRIC MACHINES AND DRIVES CONFERENCE (IEMDC), 2017,
[26] Design and Test Result of Novel Single-Drive Bearingless Motor with Cylindrical Radial Gap
Sugimoto, Hiroya
Tanaka, Seiyu
Chiba, Akira
Asama, Junichi
2013 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE), 2013, : 2466 - 2473
[27] Basic Performance of Two-Axis Actively Positioned Bearingless Disk Motor
Asama, Junichi
Tamura, Tomoyasu
Kanehara, Daisuke
Oiwa, Takaaki
Chiba, Akira
2012 IEEE POWER AND ENERGY SOCIETY GENERAL MEETING, 2012,
[28] Winding Arrangement in Single-Drive Bearingless Motor with Radial Gap
Sugimoto, Hiroya
Tanaka, Seiyu
Chiba, Akira
Rahman, M. A.
2014 INTERNATIONAL POWER ELECTRONICS CONFERENCE (IPEC-HIROSHIMA 2014 - ECCE-ASIA), 2014, : 982 - 987
[29] Dynamic Modeling and Experimental Validations of Passing Through Critical Speeds by High Acceleration in One-Axis Actively Positioned Bearingless Motors
Sugimoto, Hiroya
Chiba, Akira
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2021, 57 (06) : 6956 - 6964
[30] Proposal of an Axial Gap Type Single-drive Bearingless Reluctance Motor
Higashi, Hiroki
Kiyota, Kyohei
Amei, Kenji
Ohji, Takahisa
2019 IEEE INTERNATIONAL ELECTRIC MACHINES & DRIVES CONFERENCE (IEMDC), 2019, : 833 - 838

← 1 2 3 4 5 →