Corrosion behaviour of the Co-Cr-Mo dental alloy in solutions of different composition and different pH values

被引:0
|
作者
Rincic, N
Baucic, I
Miko, S
Papic, M
Prohic, E
机构
[1] Publ Hlth Ctr Centar, Zagreb, Croatia
[2] Univ Zagreb, Sch Dent Med, Dept Prosthodont, Zagreb 41000, Croatia
[3] Univ Zagreb, Inst Geol, Zagreb, Croatia
[4] Fac Pract Sci, Split, Croatia
[5] Univ Zagreb, Fac Sci, Zagreb, Croatia
关键词
pH value; corrosion of Co-Cr-Mo alloy; time of exposure;
D O I
暂无
中图分类号
Q98 [人类学];
学科分类号
030303 ;
摘要
The purpose of this study was to examine how Co-Cr-Mo dental alloy behaves in the solutions of different pH value and different composition over a relatively long period of time. Co-Cr-Mo dental alloy was exposed in vitro to either simulated saliva (phosphate buffer pH 6.0), a highly acidic medium resembling the extreme conditions in the oral cavity (phosphate buffer pH 3.5), and in lactic acid at pH which occurs under the dental plaque (lactic acid pH 3.5). The alloy samples were immersed in these three solution for 1, 2, 3, 4, 5, 6, 7, 14, 21, and 30 days. Solutions were analysed with the ICP-AES. The analysis showed that during one month cobalt (Co), chromium (Cr), iron (Fe), zinc (Zn) and nickel (Ni) ions had been released from tested samples in all three solutions. The results of this study indicate that the leaching of the Co, Cr, Fe, Zn and Ni ions in the solution was dependent both upon the nature of the solution in wich the alloy was immersed and the duration of the immersion (p<0.001).
引用
收藏
页码:99 / 106
页数:8
相关论文
共 50 条
  • [21] Change of a physicochemical state of a surface of a dental Co-Cr-Mo alloy after sandblasting
    Vasyliev, M. O.
    Senkevych, A. J.
    Filatova, V. S.
    Guryn, P. O.
    METALLOFIZIKA I NOVEISHIE TEKHNOLOGII, 2006, 28 : 75 - 81
  • [22] Corrosion testing of sintered samples made of the Co-Cr-Mo alloy for surgical applications
    E. Krasicka-Cydzik
    Z. Oksiuta
    J. R. Dabrowski
    Journal of Materials Science: Materials in Medicine, 2005, 16 : 197 - 202
  • [23] Passive behaviour of Cr8Ni2 alloy corrosion-resistant steel in simulating concrete pore solutions with different pH values
    Ai Z.
    Jiang J.
    Sun W.
    Ma H.
    Zhang J.
    Song D.
    Wang D.
    Dongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Southeast University (Natural Science Edition), 2016, 46 (01): : 152 - 159
  • [24] Effect of multipass thermomechanical processing on the corrosion behaviour of biomedical Co-Cr-Mo alloys
    Yamanaka, Kenta
    Mori, Manami
    Kartika, Ika
    Anwar, Moch. Syaiful
    Kuramoto, Koji
    Sato, Shigeo
    Chiba, Akihiko
    CORROSION SCIENCE, 2019, 148 : 178 - 187
  • [25] The influence of base structure and carbon coating on the corrosion resistance of Co-Cr-Mo alloy
    Paszenda, Z
    Marciniak, J
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1998, 78 (1-3) : 143 - 149
  • [26] Corrosion processes in KCl solutions at different pH values
    Moraru, M
    Negoiu, M
    REVISTA DE CHIMIE, 2003, 54 (03): : 291 - 292
  • [27] Structure of porous samples of Co-Cr-Mo alloy
    Oksiuta, Z
    Dabrowski, JR
    Ratuszek, W
    ARCHIVES OF METALLURGY AND MATERIALS, 2004, 49 (04) : 949 - 960
  • [28] Corrosion testing of sintered samples made of the Co-Cr-Mo alloy for surgical applications
    Krasicka-Cydzik, E
    Oksiuta, Z
    Dabrowski, JR
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 2005, 16 (03) : 197 - 202
  • [29] SOLUTION TREATMENT BEHAVIOR OF CO-CR-MO ALLOY
    CLEMOW, AJT
    DANIELL, BL
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, 1979, 13 (02): : 265 - 279
  • [30] Deformation behavior of biomedical Co-Cr-Mo alloy
    Matsumoto, Hiroaki
    Kurosu, Shingo
    Lee, Byoung-Soo
    Li, Yunping
    Koizumi, Yuichiro
    Chiba, Akihiko
    TMS2011 SUPPLEMENTAL PROCEEDINGS, VOL 3: GENERAL PAPER SELECTIONS, 2011, : 433 - 437