Corrosion behaviour of the Co-Cr-Mo dental alloy in solutions of different composition and different pH values

被引:0
|
作者
Rincic, N
Baucic, I
Miko, S
Papic, M
Prohic, E
机构
[1] Publ Hlth Ctr Centar, Zagreb, Croatia
[2] Univ Zagreb, Sch Dent Med, Dept Prosthodont, Zagreb 41000, Croatia
[3] Univ Zagreb, Inst Geol, Zagreb, Croatia
[4] Fac Pract Sci, Split, Croatia
[5] Univ Zagreb, Fac Sci, Zagreb, Croatia
关键词
pH value; corrosion of Co-Cr-Mo alloy; time of exposure;
D O I
暂无
中图分类号
Q98 [人类学];
学科分类号
030303 ;
摘要
The purpose of this study was to examine how Co-Cr-Mo dental alloy behaves in the solutions of different pH value and different composition over a relatively long period of time. Co-Cr-Mo dental alloy was exposed in vitro to either simulated saliva (phosphate buffer pH 6.0), a highly acidic medium resembling the extreme conditions in the oral cavity (phosphate buffer pH 3.5), and in lactic acid at pH which occurs under the dental plaque (lactic acid pH 3.5). The alloy samples were immersed in these three solution for 1, 2, 3, 4, 5, 6, 7, 14, 21, and 30 days. Solutions were analysed with the ICP-AES. The analysis showed that during one month cobalt (Co), chromium (Cr), iron (Fe), zinc (Zn) and nickel (Ni) ions had been released from tested samples in all three solutions. The results of this study indicate that the leaching of the Co, Cr, Fe, Zn and Ni ions in the solution was dependent both upon the nature of the solution in wich the alloy was immersed and the duration of the immersion (p<0.001).
引用
收藏
页码:99 / 106
页数:8
相关论文
共 50 条
  • [1] Influence of electrochemical corrosion tests in an artificial environment on the chemical composition of a Co-Cr-Mo dental alloy
    Baciu, E. R.
    Baciu, C.
    Bosinceanu, D. G.
    Baciu, M. A.
    Bosinceanu, D. N.
    Baciu, M.
    Bulancea, B.
    MODTECH INTERNATIONAL CONFERENCE - MODERN TECHNOLOGIES IN INDUSTRIAL ENGINEERING VI (MODTECH 2018), 2018, 400
  • [2] Morphology of Co-Cr-Mo dental alloy surfaces polished by three different mechanical procedures
    Talu, Stefan
    Stach, Sebastian
    Klaic, Boris
    Misic, Tea
    Malina, Jadranka
    Celebic, Asja
    MICROSCOPY RESEARCH AND TECHNIQUE, 2015, 78 (09) : 831 - 839
  • [3] Electrochemical corrosion studies on Co-Cr-Mo implant alloy in biological solutions
    Hsu, RWW
    Yang, CC
    Huang, CA
    Chen, YS
    MATERIALS CHEMISTRY AND PHYSICS, 2005, 93 (2-3) : 531 - 538
  • [4] Effect of nitriding treatment on corrosion behaviour of Co-Cr-Mo alloy in liquid Al
    Tang, Ning
    Li, Yunping
    Koizumi, Yuichiro
    Chiba, Akihiko
    CORROSION SCIENCE, 2014, 78 : 244 - 250
  • [5] CORROSION RESISTANCE OF Co-Cr-Mo ALLOY USED IN DENTISTRY
    Lukaszczyk, A.
    Augustyn-Pieniazek, J.
    ARCHIVES OF METALLURGY AND MATERIALS, 2015, 60 (01) : 523 - 528
  • [6] In vitro biocompatibility assessment of Co-Cr-Mo dental cast alloy
    Dimic, Ivana
    Cvijovic-Alagic, Ivana
    Obradovic, Natasa
    Petrovic, Jelena
    Putic, Slavisa
    Rakin, Marko
    Bugarski, Branko
    JOURNAL OF THE SERBIAN CHEMICAL SOCIETY, 2015, 80 (12) : 1541 - 1552
  • [7] Phase composition of cast dental Ni-Cr-Mo and Co-Cr-Mo alloys
    Braude, IS
    Gal'tsov, NN
    Prokhvatilov, AI
    Dotsenko, VI
    Chaika, EN
    PHYSICS OF METALS AND METALLOGRAPHY, 2005, 100 (02): : 165 - 171
  • [8] Electrochemical study of the corrosion behaviour of Co-Cr-Mo orthopedic implants
    Özçelik, F
    Gülen, J
    Akdogan, A
    Piskin, S
    PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 1999, 36 (07): : 385 - 391
  • [9] Assessment of precipitation behavior in dental castings of a Co-Cr-Mo alloy
    Yamanaka, Kenta
    Mori, Manami
    Chiba, Akihiko
    JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2015, 50 : 268 - 276
  • [10] Effect of Artificial Saliva Modification on Corrosion Resistance of Metal Oxide Coatings on Co-Cr-Mo Dental Alloy
    Losiewicz, Bozena
    Osak, Patrycja
    Gorka-Kulikowska, Karolina
    Maszybrocka, Joanna
    MATERIALS, 2024, 17 (21)