Characteristics of low-temperature-prepared (Ba, Sr)TiO3 films post treated by novel excimer laser annealing

被引：0
|
作者：
Shye, DC [1 ]
Chiou, BS [1 ]
Hwang, CC [1 ]
Chen, JS [1 ]
Su, IW [1 ]
Chou, CC [1 ]
Cheng, HC [1 ]
机构：
[1] Natl Chiao Tung Univ, Dept Elect Engn, Hsinchu 30010, Taiwan
来源：
ISAF 2002: PROCEEDINGS OF THE 13TH IEEE INTERNATIONAL SYMPOSIUM ON APPLICATIONS OF FERROELECTRICS | 2002年
关键词：
excimer laser annealing; low temperature; texture; residual gas analyzer (RGA);
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Thin (Ba0.5Sr0.5)TiO3 (BST) films were sputtered on Pt[FiN/Ti/Si multilayer substrates at very low temperature (150degrees C). A novel process, using wavelength 248-nm KrF excimer laser annealing (ELA), has been undertaken to implement barium strontium titanate (BST) films at a low process temperature of 300degrees C. The crystallinity and dielectric constant are greatly improved after ELA treatment. In this work, the variation of texture was investigated. Besides, the escaped oxygen atoms from BST films were detected in-situ using a residual gas analyzer (RGA) during ELA process. Thus, the degradation of upper surface is strongly influenced by the laser energy fluence for an ELA-BST film.
引用
收藏
页码：227 / 230
页数：4
相关论文
共 50 条
  • [1] The effects of post excimer laser annealing on (Ba,Sr)TiO3 thin films at low substrate temperatures
    Shye, DC
    Chiou, BS
    Hwang, CC
    Jaing, CC
    Hsu, HW
    Chen, JS
    Cheng, HC
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, 2003, 42 (4A): : 1680 - 1685
  • [2] The effects of post excimer laser annealing on (Ba,Sr)TiO3 thin films at low substrate temperatures
    Shye, D.-C., 1680, Japan Society of Applied Physics (42):
  • [3] Current-temperature characteristics of low-temperature-sputtered (Ba,Sr)TiO3 films post treated by rapid thermal annealing
    Shye, DC
    Chen, JS
    Kuo, MW
    Chou, BCS
    Jan, CK
    Wu, MF
    Chiou, BS
    Cheng, HC
    INTEGRATED FERROELECTRICS, 2002, 47 : 217 - 225
  • [4] Current-temperature characteristics of low-temperature-sputtered (Ba,Sr)TiO3 films post treated by rapid thermal annealing
    Shye, Der-Chi
    Chen, Jyh-Shin
    Kuo, Meng-Wei
    Chou, Bruce C. S.
    Jan, Chueh-Kuei
    Wu, Mei-Fang
    Chiou, Bi-Shiou
    Cheng, Huang-Chung
    Integrated Ferroelectrics, 2002, 47 : 217 - 225
  • [5] Characteristics of (Pb, Sr)TiO3 films post treated by low temperature technologies
    Wang, JL
    Jan, CK
    Shye, DC
    Kuo, MW
    Cheng, HC
    PHYSICS AND TECHNOLOGY OF HIGH-K GATE DIELECTRICS II, 2004, 2003 (22): : 469 - 478
  • [6] Post-annealing in oxygen ambient for (Ba,Sr)TiO3 thin films prepared by pulsed laser deposition
    Kim, SG
    Mah, SB
    Jang, NW
    Paik, DS
    Park, CY
    MATERIALS LETTERS, 2000, 43 (5-6) : 254 - 258
  • [7] Structural characteristics of (Ba,Sr)TiO3 thin films by rapid thermal annealing
    Zhang, Q. Y.
    Jiang, S. W.
    Li, Y. R.
    SURFACE REVIEW AND LETTERS, 2007, 14 (01) : 141 - 145
  • [8] Low temperature ECR-CVD of (Ba,Sr)TiO3 films
    Alluri, P
    Tang, D
    Dey, SK
    INTEGRATED FERROELECTRICS, 1997, 18 (1-4) : 145 - 154
  • [9] Effects of post-annealing on the interface microstructure of (Ba,Sr)TiO3 thin films
    Yoo, DC
    Lee, JY
    JOURNAL OF CRYSTAL GROWTH, 2001, 224 (3-4) : 251 - 255
  • [10] Effects of accumulated laser pulses on (Pb,Sr)TiO3 films post-excimer laser annealed at low temperatures
    Wang, Jyh-Liang
    Lai, Yi-Sheng
    Chiou, Bi-Shiou
    Shye, Der-Chi
    Hwang, Chuan-Chou
    Cheng, Huang-Chung
    JOURNAL OF CRYSTAL GROWTH, 2007, 306 (01) : 80 - 85
12345