The effect of cooling rate and composition on the secondary dendrite arm spacing during solidification.: Part I:: Al-Cu-Si alloys

被引：24
|
作者：
Rontó, V
Roósz, A [1 ]
机构：
[1] MTA, Mat Sci Res Grp, H-3515 Miskolc, Egyetemvaros, Hungary
[2] Univ Miskolc, Fac Mat & Met Engn, Dept Met Phys, H-3515 Miskolc, Egyetemvaros, Hungary
来源：
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH | 2001年 / 13卷 / 06期
关键词：
secondary dendrite arm spacing; local solidification time; cooling rate; DTA method; concentration dependence;
D O I：
10.1080/13640461.2001.11819415
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Al-Cu-Si alloys of six different compositions have been solidified by means of the Differential Thermal Analysis (DTA) method. On the basis of the measurement results it is stated that the secondary dendrite arm spacing (lambda (2,f)) can be determined with suitable accuracy as a function of the composition (C-0,C-Cu; C-0,C-Si), using the local solidification time (t(f)) or the cooling rate ((T) overdot(L)) by means of the following equations: lambda (2,f) = 34.9 X C-0,Cu(-0.333) X C-0,Si(-0.145) X (t(f))(0.208); lambda (2,f) = 77.09 X C-0,Cu(-0.1989) X C-0,Si(-0.078) X ((T) overdot(L))(-0.252).
引用
收藏
页码：337 / 342
页数：6
相关论文
共 50 条
  • [31] Relationships between secondary dendrite arm spacing and mechanical properties of Zn-40Al-Cu alloys
    Turhal, MS
    Savaskan, T
    JOURNAL OF MATERIALS SCIENCE, 2003, 38 (12) : 2639 - 2646
  • [32] Relationships between secondary dendrite arm spacing and mechanical properties of Zn-40Al-Cu alloys
    M. Ş. Turhal
    T. Savaşkan
    Journal of Materials Science, 2003, 38 : 2639 - 2646
  • [33] Effect of cooling rate on the solidification behaviour of Al-Fe-Si alloys
    Dutta, B
    Rettenmayr, M
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 283 (1-2): : 218 - 224
  • [34] Predicting primary dendrite arm spacing in Al-Si-Mg alloys: effect of Mg alloying
    Ridgeway, Colin D.
    Gu, Cheng
    Luo, Alan A.
    JOURNAL OF MATERIALS SCIENCE, 2019, 54 (13) : 9907 - 9920
  • [35] Effects of Eutectic Si and Secondary Dendrite Ann Spacing on the Mechanical Properties of Al-Si-Cu Cast Alloys
    Lee, Kyungmin
    Choi, Seweon
    Kim, Youngchan
    Kim, Yumi
    Kang, Changseok
    Kim, Youngman
    Hong, Sungkil
    KOREAN JOURNAL OF METALS AND MATERIALS, 2014, 52 (11): : 923 - 929
  • [36] Measurements of microhardness during transient horizontal directional solidification of Al-Rich Al-Cu alloys: Effect of thermal parameters, primary dendrite arm spacing and Al2Cu intermetallic phase
    André Santos Barros
    Igor Alexsander Magno
    Fabrício Andrade Souza
    Carlos Alberto Mota
    Antonio Luciano Moreira
    Maria Adrina Silva
    Otávio Lima Rocha
    Metals and Materials International, 2015, 21 : 429 - 439
  • [37] Measurements of Microhardness During Transient Horizontal Directional Solidification of Al-Rich Al-Cu Alloys: Effect of Thermal Parameters, Primary Dendrite Arm Spacing and Al2 Cu Intermetallic Phase
    Barros, Andre Santos
    Magno, Igor Alexsander
    Souza, Fabricio Andrade
    Mota, Carlos Alberto
    Moreira, Antonio Luciano
    Silva, Maria Adrina
    Rocha, Otavio Lima
    METALS AND MATERIALS INTERNATIONAL, 2015, 21 (03) : 429 - 439
  • [38] The correlation between thermal variables and secondary dendrite arm spacing during solidification of horizontal cylinders of Sn-Pb alloys
    de Souza, EN
    Cheung, N
    Garcia, A
    JOURNAL OF ALLOYS AND COMPOUNDS, 2005, 399 (1-2) : 110 - 117
  • [39] Effect of Cooling Rate on the Dendrite Coherency Point During Solidification of Al2024 Alloy
    Ghoncheh, M. H.
    Shabestari, S. G.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (03): : 1287 - 1299
  • [40] Effect of Cooling Rate on the Dendrite Coherency Point During Solidification of Al2024 Alloy
    M. H. Ghoncheh
    S. G. Shabestari
    Metallurgical and Materials Transactions A, 2015, 46 : 1287 - 1299
12345