Evaluation of dielectric cure monitoring for in situ measurement of natural rubber vulcanization

被引：4

作者：

Chueangchayaphan, Narong ^{[1
]}

Nithi-Uthai, Nattapong ^{[1
]}

Techakittiroj, Kittiphan ^{[2
]}

Manuspiya, Hathaikarn ^{[3
]}

机构：

[1] Prince Songkla Univ, Fac Sci & Technol, Dept Rubber Technol & Polymer Sci, Pattani, Thailand

[2] Assumption Univ, Dept Mechatron Engn, Fac Engn, Samut Prakan, Thailand

[3] Chulalongkorn Univ, Petr & Petrochem Coll, Bangkok, Thailand

来源：

ADVANCES IN POLYMER TECHNOLOGY | 2018年 / 37卷 / 08期

关键词：

dielectric cure monitoring; rubber cure characterization; rubber cure monitoring system; vulcanization; SPECTROSCOPY; KINETICS; SULFUR; SYSTEM; DYNAMICS; SCORCH; OXIDE;

D O I：

10.1002/adv.22122

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

A novel in situ rubber cure monitoring system (RCMS) has been developed for monitoring the progress of vulcanization based on the measurement of electrical properties. The sensors connected to an LCR meter were embedded in the compression mold and measured changes in the electrical properties of rubber during vulcanization. Frequencies ranging from 0.75 to 100 kHz were probed for capacitance and conductance, and 5 kHz frequency was found suitable for monitoring natural rubber vulcanization. The results show that capacitance during curing correlated with the time profile of torque from a moving die rheometer (MDR). The scorch time and optimum cure time obtained from MDR and RCMS were reported. The degree of cure and the cure rate from two methods were compared. Good correlations between the alternative methods were observed, supporting the potential of in situ RCMS during the vulcanization of natural rubber.

引用

页码：3384 / 3391

页数：8

共 50 条

[41] Cure Kinetics and Morphology of Natural Rubber Reinforced by the In Situ Polymerization of Zinc Dimethacrylate
Nie, Yijing
Huang, Guangsu
Qu, Liangliang
Zhang, Peng
Weng, Gengsheng
Wu, Jinrong
JOURNAL OF APPLIED POLYMER SCIENCE, 2010, 115 (01) : 99 - 106
[42] Enhancing Rubber Vulcanization Cure Kinetics: Lowering Vulcanization Temperature by Addition of MgO as Co-Cure Activator in ZnO-Based Cure Activator Systems
Alam, Md Najib
Kumar, Vineet
Jeong, Seok U.
Park, Sang-Shin
POLYMERS, 2024, 16 (07)
[43] Effect of vulcanization temperature on the cure characteristics and vulcanizate properties of polybutadiene rubber
1600, (27):
[44] EFFECT OF VULCANIZATION TEMPERATURE ON THE CURE CHARACTERISTICS AND VULCANIZATE PROPERTIES OF POLYBUTADIENE RUBBER
KURIAN, T
GEORGE, KE
FRANCIS, DJ
INDIAN JOURNAL OF TECHNOLOGY, 1989, 27 (01): : 21 - 25
[45] Effect of non-rubber substances on vulcanization kinetics of natural rubber
Wang Ping-Yue
Wang Yong-Zhou
Zhang Bei-Long
Huang Hong-Hai
JOURNAL OF APPLIED POLYMER SCIENCE, 2012, 126 (04) : 1183 - 1187
[46] Reinforcing and plasticizing effects of reclaimed rubber on the vulcanization and properties of natural rubber
Ren, Teng
Song, Pan
Yang, Wei
Formela, Krzysztof
Wang, Shifeng
JOURNAL OF APPLIED POLYMER SCIENCE, 2023, 140 (10)
[47] Vulcanization and mechanical properties of natural rubber liquid polyisoprene rubber blends
Lee, HW
Lee, DS
Hong, SP
POLYMER-KOREA, 1998, 22 (06) : 966 - 971
[48] Studies in the vulcanization of rubber V Dielectric constant and power factor of vulcanized rubber
Kitchin, DW
INDUSTRIAL AND ENGINEERING CHEMISTRY, 1932, 24 : 549 - 555
[49] Non-isothermal in situ dielectric cure monitoring for thermosetting matrix composites
Lee, DG
Kim, HG
JOURNAL OF COMPOSITE MATERIALS, 2004, 38 (12) : 977 - 993
[50] Miniaturized Flexible Interdigital Sensor for In Situ Dielectric Cure Monitoring of Composite Materials
Boll, Dmitriy
Schubert, Konstantin
Brauner, Christian
Lang, Walter
IEEE SENSORS JOURNAL, 2014, 14 (07) : 2193 - 2197

← 1 2 3 4 5 →