Establishment and Development of Croatian Quality Control System for Wood-Based Panels in Accordance with European Technical Regulations

被引:0
|
作者
Jambrekovic, Vladimir [1 ]
Kljak, Jaroslav [1 ]
Spanic, Nikola [1 ]
Klaric, Miljenko [1 ]
机构
[1] Univ Zagreb, Fac Forestry, Dept Wood Technol, Zagreb 10000, Croatia
关键词
wood-based panels; quality control; TC; 89; technical regulation; European standards;
D O I
10.5552/drind.2011.1001
中图分类号
TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];
学科分类号
0805 ; 080502 ; 0822 ;
摘要
After reaching its independence, Croatia's (CRO) main economic goal was to enter the international market and join the European Union (EU). As foreign trade relations developed, it was necessary to establish a quality control system for wood-based panels. The development of the quality system started at the Stale Office for Standardization and Metrology (SOSM). The Faculty of Forestry was intensively involved in all activities related to the establishment of the quality system, such as the establishment of testing laboratories, education, certification, quality control, work in technical committees, and special activities were directed towards the implementation of technical regulations in wood technology practice. The system was first introduced by the Order of obligatory certification of particleboard panels for general use and construction (Official Gazette "Sl. list" 61/83), based on laws of the former state. In accordance with the Order in 1995 SOSM authorized the Faculty of Forestry for conducting the certification of particleboards. The Ministry of Economy was also included in the development of the system in areas not covered by the Order and regulations under SOSM's jurisdiction. In the field of wood-based panels, a respectable system was built by the end of 1998. The next step was the preparation of technical regulations with the implementation of harmonized European standards. However for reasons beyond understanding, the system completely collapsed, and in early 2004 it practically ceased to exist. The Ministry of Economy and the Croatian Government abolished all decisions on quality control of wood-based panels, except the obligatorily certification of particleboards performed by SOSM, and it stopped its activities in 2003. The Ministry of Environmental Protection, Physical Planning and Construction (MEPPPC), as the competent institution, took over the certification of particleboards after a whole year of lack of any quality control of wood-based panels, and implemented the European standards for particleboards into technical regulations for construction. However the certification of particleboards is still pet:fin-tiled in accordance with standards of the former state. In the attempt to enact the Technical Regulation for wood-based panels, initiated by the Ministry of Regional Development, Forestry and Water Management (MRDFWM), no consensus was reached, due to the application of wood-based panels both in the area of general use and in the field of construction.
引用
收藏
页码:55 / 61
页数:7
相关论文
共 50 条
  • [41] Development of a novel façade sandwich panel with low-density wood fibres core and wood-based panels as facesEntwicklung einer neuartigen Sandwich-Fassadenplatte aus einem Kern mit niedrig verdichteten Holzfasern und Holzwerkstoffbeplankung
    José L. Fernandez-Cabo
    Almudena Majano-Majano
    Luis San-Salvador Ageo
    Miguel Ávila-Nieto
    European Journal of Wood and Wood Products, 2011, 69 (3) : 459 - 470
  • [42] Development and implementation of an Excel network-based laboratory quality control system.
    Heser, DW
    Klee, GG
    CLINICAL CHEMISTRY, 1999, 45 (06) : A26 - A27
  • [43] Development of a low cost machine vision based quality control system for a learning factory
    Louw, Louis
    Droomer, Marli
    RESEARCH. EXPERIENCE. EDUCATION., 2019, 31 : 264 - 269
  • [44] Development of Quality Control and Breeding Management System of Goats Based on Information and Communication Technology
    Hirata, Teppei
    Ijichi, Ai
    Oshiro, Miwako
    Gakiya, Chiaki
    Kuwae, Ken
    Shimabukuro, Akimichi
    Tamaki, Shiro
    STUDIES IN INFORMATICS AND CONTROL, 2013, 22 (01): : 81 - 90
  • [45] A framework for the generation of project-specific quality control for knowledge-based system development
    Clarke, R
    Soltan, H
    EXPERT SYSTEMS, 1996, 13 (01) : 41 - 54
  • [46] THE DEVELOPMENT OF CHINA ORGAN DONATION HOSPITAL-BASED QUALITY MANAGEMENT SYSTEM ADOPTING THE EUROPEAN AND WHO GUIDELINE
    Jiang, Wenshi
    Dong, Jian-Hui
    Yao, Ziqin
    Feng, Guiwen
    Li, Chao
    Zhang, Hui
    Jiang, Jing
    Liang, Liji
    Luo, Peng
    Li, Guohui
    Manyalich, Marti
    Sun, Xuyong
    TRANSPLANT INTERNATIONAL, 2019, 32 : 197 - 198
  • [47] Development and evaluation of a quality control system based on transdermal electrical resistance for skin barrier function in vitro
    Knoth, Katharina
    Zaeh, Ralf-Kilian
    Veldung, Barbara
    Burgio, Dominic
    Wiegand, Birgit
    Smola, Hans
    Bock, Udo
    Lehr, Claus-Michael
    Hittinger, Marius
    Gross, Henrik
    SKIN RESEARCH AND TECHNOLOGY, 2021, 27 (05) : 668 - 675
  • [48] Development of a control system for roasting carbon-graphite materials based on modeling quality characteristics of roasted products
    Soshkin, G. S.
    Rutkovskii, A. L.
    Soshkin, S. V.
    RUSSIAN JOURNAL OF NON-FERROUS METALS, 2011, 52 (05) : 457 - 461
  • [49] Development of a control system for roasting carbon-graphite materials based on modeling quality characteristics of roasted products
    G. S. Soshkin
    A. L. Rutkovskii
    S. V. Soshkin
    Russian Journal of Non-Ferrous Metals, 2011, 52 : 457 - 461
  • [50] Research on the Development Pattern of the Control of Agricultural Products and Quality Safety Supervision System Based on the RFID and the Internet of Things Technology
    Lai Yong-bo
    Xu Xue-rong
    2015 3RD INTERNATIONAL CONFERENCE ON ADVANCES IN SOCIAL SCIENCE, HUMANITIES, AND MANAGEMENT, ASSHM 2015, 2015, : 1274 - 1282