Flow Structure and Penetration Behavior of a Submerged Annular Jet of a Bingham Fluid

被引:0
|
作者
Hammad, Khaled J. [1 ]
机构
[1] Cent Connecticut State Univ, New Britain, CT 06050 USA
来源
ASME FLUIDS ENGINEERING DIVISION SUMMER MEETING - 2014, VOL 1C: SYMPOSIA | 2014年
关键词
LAMINAR JETS;
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The flow and penetration characteristics of a submerged annular jet of a Bingham non-Newtonian fluid were investigated numerically within the steady laminar flow regime. Central and outer recirculation regions typically characterize the flow of a Newtonian annular jet. However, in the case of a Bingham jet, once a critical yield number is exceeded, flow recirculation throughout the whole flow field is eliminated and stagnant, attached-to-the-wall regions are formed. Extent of the outer recirculation region and the recirculation strength of both the outer and central regions are found to significantly diminish with the yield number. The axial penetration of a submerged annular jet decreases with the inner-to-outer annular nozzle diameter ratio and the yield numbers. Annular jets of yield stress fluids decay continuously, very rapidly, and can vanish within the initial few jet diameters. The point at which the axial momentum of the jet vanishes shifts upstream with both the yield number and the annular diameter ratio.
引用
收藏
页数:10
相关论文
共 50 条
  • [41] FLOW STRUCTURE IN THE NEAR-WALL REGION OF A SUBMERGED IMPINGING JET
    Hammad, Khaled J.
    Milanovic, Ivana M.
    PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION SUMMER CONFERENCE, VOL 1, PTS A-C, 2009, : 1445 - 1455
  • [42] The Influence Of Confining Pressure On The Flow Field Structure Of Submerged Water Jet
    Yang, Xiaofeng
    PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON CIVIL ENGINEERING AND TRANSPORTATION 2015, 2016, 30 : 1400 - 1404
  • [43] Effects of Flow Hydraulics, Pipe Structure and Submerged Jet on Leak Behaviour
    Shahangian, S. A.
    Tabesh, M.
    Mirabi, M. H.
    CIVIL ENGINEERING INFRASTRUCTURES JOURNAL-CEIJ, 2019, 52 (02): : 225 - 243
  • [44] Flow Structure in the Near-Wall Region of a Submerged Impinging Jet
    Hammad, Khaled J.
    Milanovic, Ivana
    JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2011, 133 (09):
  • [45] An experimental investigation of flow structure and heat transfer in an impinging annular jet
    Terekhov, V. I.
    Kalinina, S. V.
    Sharov, K. A.
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2016, 79 : 89 - 97
  • [46] Influence of a Yield-Shear-Thinning Rheology on the Flow Behavior of Submerged Annular Jets
    Hammad, Khaled J.
    PROCEEDINGS OF THE ASME 2020 FLUIDS ENGINEERING DIVISION SUMMER MEETING (FEDSM2020), VOL 3, 2020,
  • [47] Inflow Conditions and the Flow Behavior of Submerged Annular Viscoplastic Non-Newtonian Jets
    Hammad, Khaled J.
    JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2024, 146 (07):
  • [48] The Flow and Decay Behavior of a Submerged Shear-Thinning Jet With Yield Stress
    Hammad, Khaled J.
    JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2016, 138 (08):
  • [49] Exploring the periodic behavior of the lid-driven cavity flow filled with a Bingham fluid
    Ferrari, Marco A.
    Franco, Admilson T.
    JOURNAL OF NON-NEWTONIAN FLUID MECHANICS, 2023, 316
  • [50] Creeping flow around particles in a Bingham fluid
    Putz, A.
    Frigaard, I. A.
    JOURNAL OF NON-NEWTONIAN FLUID MECHANICS, 2010, 165 (5-6) : 263 - 280