Design and Manufacture of a High-speed Rotor in a Flywheel Demonstrator

被引：0

作者：

Li, Xing ^{[1
]}

An, Jeongki ^{[1
]}

Erd, Nicolas ^{[1
]}

Dietz, Daniel ^{[1
]}

Gemeinder, Yves ^{[1
]}

Binder, Andreas ^{[1
]}

机构：

[1] Tech Univ Darmstadt, Inst Elect Energy Convers, Darmstadt, Germany

来源：

2020 23RD INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS) | 2020年

关键词：

Flywheel; Rotor; Strength;

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

A high-speed flywheel demonstrator with 28 kW rated power was designed and built. The rotor is made of steel, which contains 0.5 kWh energy capacity at the maximum revolution speed of 24 000 min(-1). This paper presents the mechanical issues regarding the design and manufacturing of this steel rotor. During the hardening process, an unpredicted damage occurred in the rotor due to overloaded thermal stress. The analysis of this damage and the solution are presented. After assembling the rotor components of the drive machine and the magnetic bearings, the rotor was tested at 120 % overspeed. The designed rotor passed the test successfully up to the speed of 28 800 min(-1) for 2 minutes according to standard IEC 60034-1. After assembled in the complete system, the rotor was also successfully driven up to the maximum operating speed of 24 000 min(-1), suspended by magnetic bearings.

引用

页码：384 / 389

页数：6

共 50 条

[41] ON FLEXIBLE INPUT SHAFT AND FLYWHEEL INTERACTION IN HIGH-SPEED MACHINES
PANDEY, RC
MIDHA, A
MECHANISM AND MACHINE THEORY, 1981, 16 (04) : 321 - 337
[42] Magnetic Bearing Design and Operation to Minimize the Axial Length of High-speed Rotor
Park J.-H.
Noh S.
Cho H.-W.
Transactions of the Korean Institute of Electrical Engineers, 2024, 73 (02): : 305 - 311
[43] High-speed IPM Motors with Rotor Sleeve: Structural Design and Performance Evaluation
Binder, Josef
Silvagni, Mario
Ferrari, Simone
Deusinger, Bjoern
Tonoli, Andrea
Pellegrino, Gianmario
2023 IEEE WORKSHOP ON ELECTRICAL MACHINES DESIGN, CONTROL AND DIAGNOSIS, WEMDCD, 2023,
[44] Stability Assessment of the High-Speed Flywheel with AMBs on a Rotating Platform
Zhao, Yulan
Liu, Pingfan
Lv, Qichao
Zhang, Kai
Zhao, Lei
ENERGIES, 2024, 17 (11)
[45] Optimized design of trim strategy for coaxial rigid rotor high-speed helicopter
Wang, Zixu
Li, Pan
Lu, Ke
Zhu, Zhenhua
Chen, Renliang
Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica, 2024, 45 (09):
[46] Robust design method for dynamic properties of high-speed flexible rotor systems
Hong J.
Yang Z.
Lyu C.
Ma Y.
Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics, 2019, 45 (05): : 855 - 862
[47] Design and Optimization of a Radial Magnetic Bearing for High-Speed Motor With Flexible Rotor
Le, Yun
Fang, Jiancheng
Wang, Kun
IEEE TRANSACTIONS ON MAGNETICS, 2015, 51 (06)
[48] Vibration control for active magnetic bearing high-speed flywheel rotor system with modal separation and velocity estimation strategy
Chen, Liangliang
Zhu, Changsheng
Wang, Meng
Jiang, Kejian
JOURNAL OF VIBROENGINEERING, 2015, 17 (02) : 757 - 775
[49] Spin test of three-dimensional composite rotor using polymer ring as a connection device for high-speed flywheel
Hiroshima, Noboru
Hatta, Hiroshi
Nagura, Yuuichi
Koyama, Masashi
Sakai, Takenobu
Kogo, Yasuo
MECHANICAL ENGINEERING JOURNAL, 2016, 3 (04):
[50] Internal model control for the AMB high-speed flywheel rotor system based on modal separation and inverse system method
Chen, Liangliang
Zhu, Changsheng
Zhong, Zhixian
Sun, Min
Zhao, Wenlong
IET ELECTRIC POWER APPLICATIONS, 2019, 13 (03) : 349 - 358

← 1 2 3 4 5 →