The significance of fibre microbuckling for the flexural strength of a composite

被引：12
|
作者：
Marissen, R
Brouwer, HR
机构：
[1] DSM Res BV, Polymer Construct Mat, NL-6160 MD Geleen, Netherlands
[2] Delft Univ Technol, NL-2600 GA Delft, Netherlands
[3] Free Univ Brussels, B-1050 Brussels, Belgium
来源：
COMPOSITES SCIENCE AND TECHNOLOGY | 1999年 / 59卷 / 03期
关键词：
D O I：
10.1016/S0266-3538(98)00071-2
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
Long- or continuous-fibre-reinforced polymers often show a significant difference between the tensile and flexural strength. Both higher and lower values of the flexural strength, relative to the tensile strength, are observed. Lower values are often caused by the occurrence of fibre microbuckling at the compression side of the specimen. This paper presents a relationship between the average microbuckling stress in the microbuckled cross-sectional area, the tensile strength and the flexural strength. It is found that the flexural strength may be significantly higher than the fibre microbuckling stress. (C) 1999 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：327 / 330
页数：4
相关论文
共 50 条
  • [21] Influence of fibre position on the flexural properties and strain energy of a fibre-reinforced composite
    Ellakwa, A
    Shortall, A
    Marquis, P
    JOURNAL OF ORAL REHABILITATION, 2003, 30 (07) : 679 - 682
  • [22] Single fiber microbuckling in a model composite
    Mueller, C
    Gorius, A
    Nazarenko, S
    Hiltner, A
    Baer, E
    JOURNAL OF COMPOSITE MATERIALS, 1996, 30 (17) : 1912 - 1921
  • [23] Investigation of flexural and dynamic mechanical properties of bagasse fibre composite
    Kumar, B. Senthil
    Murugan, T.
    Sakthivel, S.
    JOURNAL OF THE TEXTILE INSTITUTE, 2022, 113 (12) : 2634 - 2640
  • [24] FLEXURAL PERFORMANCE OF FIBRE REINFORCED COMPOSITE BEAMS - NUMERICAL ANALYSIS
    Banat, Dominik
    COMPOSITES THEORY AND PRACTICE, 2019, 19 (03): : 119 - 125
  • [25] Flexural behaviour of fibre reinforced geopolymer concrete composite beams
    Vijai, K.
    Kumutha, R.
    Vishnuram, B. G.
    COMPUTERS AND CONCRETE, 2015, 15 (03): : 437 - 459
  • [26] Influence of fibre volume fraction and fibre orientation on the residual flexural tensile strength of fibre-reinforced concrete
    Minguez Algarra, Jesus
    Gonzalez Cabrera, Dorys
    Vicente Cabrera, Miguel Angel
    HORMIGON Y ACERO, 2019, 70 (287): : 15 - 21
  • [27] Flexural strength and microstructure of alkali-resistant glass fibre reinforced calcium aluminate-phenol resin composite
    Emami, S.
    Nooranian, H.
    Kamalloo, A.
    ADVANCES IN CEMENT RESEARCH, 2011, 23 (01) : 11 - 15
  • [28] The Effect on the Flexural Strength, Flexural Modulus and Compressive Strength of Fibre Reinforced Acrylic with That of Plain Unfilled Acrylic Resin - An in Vitro Study
    Thomas, Tony C.
    Kumar, Aswini K.
    Mohamed, Shamaz
    Krishnan, Vinod
    Mathew, Anil
    Manju, V
    JOURNAL OF CLINICAL AND DIAGNOSTIC RESEARCH, 2015, 9 (03) : ZC12 - ZC14
  • [29] Flexural fatigue strength prediction of steel fibre reinforced concrete beams
    Singh, S.P.
    Ambedkar, B.R.
    Mohammadi, Y.
    Kaushik, S.K.
    Electronic Journal of Structural Engineering, 2008, 8 : 46 - 54
  • [30] Microstructure and flexural strength of the Y:TZP/BG composite
    de Paula Miranda, Ranulfo Benedito
    Borges, Roger
    Marchi, Juliana
    de Lima, Nelson Batista
    Cesar, Paulo Francisco
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2019, 16 (05) : 1979 - 1988
12345