Analysis of insertion process for robotic assembly

被引：0
|
作者：
Kilikevicius, S. [1 ]
Baksys, B. [1 ]
机构：
[1] Kaunas Univ Technol, Dept Mechatron, LT-44025 Kaunas, Lithuania
来源：
JOURNAL OF VIBROENGINEERING | 2007年 / 9卷 / 04期
关键词：
peg-in-hole; vibrations; robotic assembly; simulation;
D O I：
暂无
中图分类号：
R318 [生物医学工程];
学科分类号：
0831 ;
摘要：
Insertion process of cylindrical parts with clearance for robotic assembly using vibratory excitation is analyzed in the paper. Mathematical model of vibratory parts insertion process, which determines peg contact with the chamfer of the bush, peg one point and two point contact with the bush hole, was formed. Simulation of cylindrical parts insertion process was performed. The influence of vibrations on the insertion process, when mobile based peg is kinematically excited in axial direction, was determined. The combinations of excitation and system parameters, under which insertion process duration is the shortest and the process is the most reliable, were detected.
引用
收藏
页码：35 / 40
页数：6
相关论文
共 50 条
  • [31] Robotic Assembly of Gearmotors: Stator Insertion Operation Using Pose Detection and Contact Position Estimation
    Yamada, Takayoshi
    Imai, Yasumoto
    Sato, Junya
    Hayashi, Toshiki
    Aono, Shota
    JOURNAL OF ROBOTICS NETWORKING AND ARTIFICIAL LIFE, 2023, 10 (02): : 184 - 191
  • [32] Learning Insertion Primitives with Discrete-Continuous Hybrid Action Space for Robotic Assembly Tasks
    Zhang, Xiang
    Jin, Shiyu
    Wang, Changhao
    Zhu, Xinghao
    Tomizuka, Masayoshi
    2022 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION, ICRA 2022, 2022, : 9881 - 9887
  • [33] Industrial Robotic Assembly Process Modeling Using Support Vector Regression
    Li, Binbin
    Chen, Heping
    Jin, Tongdan
    2014 IEEE/RSJ INTERNATIONAL CONFERENCE ON INTELLIGENT ROBOTS AND SYSTEMS (IROS 2014), 2014, : 4334 - 4339
  • [34] Intelligent process model for robotic part assembly in a partially unstructured environment
    Son, C
    IEE PROCEEDINGS-CONTROL THEORY AND APPLICATIONS, 1999, 146 (03): : 282 - 288
  • [35] Collaborative Two-Arm Robotic Torso for the Development of an Assembly Process
    Martinez, Sonia
    Carvajal, Anahi
    Loza, David
    Ibarra, Alexander
    Segura, Luis
    2017 CHILEAN CONFERENCE ON ELECTRICAL, ELECTRONICS ENGINEERING, INFORMATION AND COMMUNICATION TECHNOLOGIES (CHILECON), 2017,
  • [36] Safety assessment in robotic assembly process using the concept of discrimination information
    Choi, Gi Heung
    Kim, Jung Soo
    Kim, Woon Kyung
    Kwak, Kun Pyung
    Choi, Gi Sang
    PROGRESS IN SAFETY SCIENCE AND TECHNOLOGY, VOL 6, PTS A AND B, 2006, 6 : 3 - 8
  • [37] Improved parameter optimization method for complex assembly process in robotic manufacturing
    Chen, Heping
    Xu, Jing
    Zhang, Biao
    Fuhlbrigge, Thomas
    INDUSTRIAL ROBOT-THE INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH AND APPLICATION, 2017, 44 (01): : 21 - 27
  • [38] Process planning and robotic assembly system design for technical textile fabrics
    Seliger, G.
    Gutsche, C.
    Hsieh, L.-H.
    CIRP Annals - Manufacturing Technology, 1992, 41 (01) : 33 - 36
  • [39] A novel jigless process applied to a robotic cell for aircraft structural assembly
    Joao Marcos Gomes de Mello
    Luís Gonzaga Trabasso
    André Cordeiro Reckevcius
    André Luiz Oliveira Amaral Palmeira
    Paulo Reiss
    Wagner Caraca
    The International Journal of Advanced Manufacturing Technology, 2020, 109 : 1177 - 1187
  • [40] A novel jigless process applied to a robotic cell for aircraft structural assembly
    Gomes de Mello, Joao Marcos
    Trabasso, Luis Gonzaga
    Reckevcius, Andre Cordeiro
    Oliveira Amaral Palmeira, Andre Luiz
    Reiss Jr, Paulo
    Caraca, Wagner
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 109 (3-4): : 1177 - 1187
12345