Microstructure and mechanical properties of Ti-based solid-solution cermets

被引：43
|
作者：
Kim, Jiwoong [1 ]
Seo, Moonsu [1 ]
Kang, Shinhoo [1 ]
机构：
[1] Seoul Natl Univ, Dept Mat Sci & Engn, Seoul 151742, South Korea
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2011年 / 528卷 / 06期
关键词：
Ti-based solid-solution; Carbothermal reduction; Microstructure; Mechanical properties; Transverse rupture strength; FRACTURE-TOUGHNESS;
D O I：
10.1016/j.msea.2010.11.076
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The microstructure and mechanical properties of various (Ti1-xWx)C-20 wt.%Ni cermets were investigated, where x varies from 0.07 to 0.3. Homogeneous solid-solution (Ti1-xWx)C powders were prepared by carbothermal reduction via planetary milling of Ti, TiO2, WO3 and carbon powder mixtures. The cermets made of the powders showed a simple core-rim structure consisting of solid-solution carbides. The hardness of the solid-solution cermets is somewhat lower than that of conventional cermets, but they show greater toughness. The transverse rupture strength increases with increasing W content. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码：2517 / 2521
页数：5
相关论文
共 50 条
  • [21] Effect of diamond addition on microstructure and mechanical properties of Ti(C,N)-based cermets
    Zhou, Haojun
    Tao, Hongliang
    Huang, Mingchu
    Yang, Hao
    Wu, Ning
    Li, Yimin
    Yin, Yuhang
    Luo, Fenghua
    CERAMICS INTERNATIONAL, 2021, 47 (02) : 2294 - 2302
  • [22] Effect of heating rate on the mechanical properties and microstructure of Ti(C,N)-based cermets
    Xu, Qingzhong
    Ai, Xing
    Zhao, Jun
    Zhang, Hongshan
    Qin, Wenzhen
    Gong, Feng
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 628 : 281 - 287
  • [23] Effect of sintering temperature on the microstructure and mechanical properties of Ti(C, N)-based cermets
    Yonglin Yan
    Yong Zheng
    Haijun Yu
    Haijian Bu
    Xin Cheng
    Nengwei Zhao
    Powder Metallurgy and Metal Ceramics, 2007, 46 : 449 - 453
  • [24] Effects of metal binder on the microstructure and mechanical properties of Ti(C,N)-based cermets
    Xu, Qingzhong
    Ai, Xing
    Zhao, Jun
    Gong, Feng
    Pang, Jiming
    Wang, Yintao
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 644 : 663 - 672
  • [25] Effect of carbon content on the microstructure and mechanical properties of Ti(C, N)-based cermets
    Zheng, Y
    Liu, WJ
    Wang, SX
    Xiong, WH
    CERAMICS INTERNATIONAL, 2004, 30 (08) : 2111 - 2115
  • [26] Microstructure and mechanical properties of TiSiN coatings deposited on the Ti(C,N) based cermets
    Chen, Zhongming
    Liu, Wenjun
    You, Min
    Feng, Ping
    Yu, Haizhou
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2019, 127 (08) : 564 - 569
  • [27] Effect of SiC Whisker on Microstructure and Mechanical Properties of Ti (C, N)-based Cermets
    Xiao, Shuiqing
    Xi, Xiu'an
    Wu, Shanghua
    Ashraf, Muhammad Aqeel
    Paper Asia, 2018, (COMPENDIUM 1): : 22 - 27
  • [28] Microstructure and mechanical properties of Ti(C, N)-based cermets with different molybdenum contents
    Wang, SY
    Xiong, WH
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2005, 15 : 148 - 152
  • [29] Effects of NiTi additions on the microstructure and mechanical properties of Ti(C,N)-based cermets
    Li, Qilong
    Liu, Ning
    Liu, Aijun
    Zhang, Hongliang
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2013, 40 : 43 - 50
  • [30] Effect of WC on the microstructure and mechanical properties of nano Ti(C,N)-based cermets
    Dong, Guangbiao
    Xiong, Ji
    Chen, Jianzhong
    Guo, Zhixing
    Wan, Weicai
    Yi, Chenhong
    Chen, Hongsheng
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2012, 35 : 159 - 162
12345