Performance of basic mixed oxides for aqueous-phase 5-hydroxymethylfurfural-acetone aldol condensation

This paper is focused on the study of the catalytic activity of MgAI and MgZr mixed oxides in the aqueous phase aldol-condensation of 5-hydroxymethylfurfural (5-HMF) and acetone. The experiment is carried out in a stirred batch reactor. It considers the effect of reaction conditions (namely temperature, reactant concentration and catalyst loading) on catalyst performance. It also looks into the stability of the materials (catalyst reusability in subsequent reaction cycles), as well as into the development and validation of a simplified kinetic model. MgZr catalyst provides the best yield to aldol condensation products, especially for the formation of the second adduct (C15). This material high activity results from its optimum acid/basic sites ratio, mainly medium-strength. Retroaldolization, promoted by stronger basic sites, was identified as an important side-reaction, whereas adsorption effects and oligomerization reactions (evaluated using thermogravimetric analysis and temperature-programmed oxidation of the spent catalysts) determine catalyst stability. Concerning the effect of operation conditions, the best results were obtained working with 0.5 g of MgZr, at 323 K. The highest C15 yield was reached with 5-HMF excess (2:1) (16.1%), whereas the whole yield is maximized at equimolar conditions (37%). (C) 2016 Elsevier B.V. All rights reserved.