Compressive and tribological properties of Al2O3 fibre and hexagonal BN particle hybrid reinforced Al-Si alloys

Al2O3 fibre-hexagonal BN particle hybrid reinforced aluminium-silicon alloys were fabricated by centrifugal force infiltration route. Hardness test and ultimate compressive test results are reported. The wear and friction properties of hybrid MMCs was investigated by means of a block-on-ring (bearing steel) type wear rig in a dry sliding condition. It is shown that the hardness and ultimate compressive strength of hybrid MMCs was evidently decreased with the addition of hexagonal BN particles, however, the wear rate and coefficient of friction of hybrid MMCs was improved simultaneously with increase of BN particle volume fraction, especially for the higher applied loads in the test.