FILM-COOLING CHARACTERISTICS OF UPSTREAM RAMP ENHANCED TURBINE BLADE SURFACE COOLING

被引：5

作者：

Halder, Paresh ^{[1
]}

Samad, Abdus ^{[1
]}

Kim, Jun-Hee ^{[2
]}

Kim, Kwang-Yong ^{[2
]}

机构：

[1] Indian Inst Technol, Dept Ocean Engn, Madras 600036, Tamil Nadu, India

[2] Inha Univ, Dept Mech Engn, 253 Yonghyun Dong, Incheon 402751, South Korea

来源：

HEAT TRANSFER RESEARCH | 2017年 / 48卷 / 11期

关键词：

upstream ramp; film cooling; turbine blade cooling; heat transfer; HEAT-TRANSFER COEFFICIENTS; SINGLE ROUND HOLE; CROSS-FLOW; STREAMWISE ANGLES; EXPANDED EXITS; FLAT-PLATE; PART I; PERFORMANCE; GEOMETRY; RATIO;

D O I：

10.1615/HeatTransRes.2017015557

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

Film cooling is widely used in high-performance gas turbines to reduce the surface heat flux. Placing a ramp upstream of a film-cooling hole improves the film-cooling effectiveness. In this work, the Reynolds-averaged Navier-Stokes equations with the k-omega SST model are solved to simulate heat transfer and fluid flow over an upstream ramp and two rows of injection holes. Three blowing ratios (M = 0.6, 1.0, and 1.6) and three upstream ramp angles (alpha=0,14 degrees to 24 degrees) are tested. It is found from the investigation that the film-cooling effectiveness increases with the upstream ramp angle and blowing ratio. Higher film-cooling effectiveness is noticed downstream of the second row holes than that of the upstream holes in the case without a ramp.

引用

页码：969 / 984

页数：16

共 50 条

[41] Impact of film-cooling jets on turbine aerodynamic losses
Walters, DK
Leylek, JH
JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2000, 122 (03): : 537 - 545
[42] EXPERIMENTAL VERIFICATION OF FILM-COOLING CONCEPTS ON A TURBINE VANE
GLADDEN, MJ
GAUNTNER, JW
MECHANICAL ENGINEERING, 1976, 98 (02) : 83 - 83
[43] Effect of upstream slot leakage on turbine endwall film cooling characteristics
Zhang, Weixin
Xie, Yehang
Ding, Yuqiang
Liu, Zhao
Feng, Zhenping
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2024, 197
[44] Effect of Flow Parameter Variations on Full Coverage Film-Cooling Effectiveness for a Gas Turbine Blade
Mhetras, Shantanu
Han, Je-Chin
Rudolph, Ron
JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2012, 134 (01):
[45] Film-cooling effectiveness on a gas turbine blade tip using pressure-sensitive paint
Ahn, J
Mhetras, S
Han, JC
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2005, 127 (05): : 521 - 530
[46] Effect of flow parameter variations on full coverage film-cooling effectiveness for a gas turbine blade
Mhetras, Shantanu
Han, Je-Chin
Rudolph, Ron
PROCEEDINGS OF THE ASME TURBO EXPO 2007, VOL 4, PTS A AND B, 2007, : 93 - 103
[47] Effect of discrete-hole arrangement on film-cooling effectiveness for the endwall of a turbine blade cascade
Satta, Francesca
Tanda, Giovanni
APPLIED THERMAL ENGINEERING, 2015, 91 : 507 - 514
[48] A novel antivortex turbine film-cooling hole concept
Heidmann, James D.
Ekkad, Srinath
JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2008, 130 (03):
[49] Film-cooling effectiveness on squealer cavity and rim walls of gas-turbine blade tip
Mhetras, Shantanu
Yang, Huitao
Gao, Zhihong
Han, Je-Chin
JOURNAL OF PROPULSION AND POWER, 2006, 22 (04) : 889 - 899
[50] Film cooling effects on the tip flow characteristics of a gas turbine blade
Wang, Jin
Sunden, Bengt
Zeng, Min
Wang, Qiuwang
PROPULSION AND POWER RESEARCH, 2015, 4 (01) : 9 - 22

← 1 2 3 4 5 →