Effect of Deep Cryogenic Treatment on Wear Resistance of AISI 52100 Bearing Steel

被引：51

作者：

Gunes, Ibrahim ^{[1
]}

Cicek, Adem ^{[2
]}

Aslantas, Kubilay ^{[3
]}

Kara, Fuat ^{[4
]}

机构：

[1] Afyon Kocatepe Univ, Fac Technol Met & Mat Engn, TR-03200 Afyon, Turkey

[2] Yildirim Beyazit Univ, Dept Mech Engn, TR-06520 Ankara, Turkey

[3] Afyon Kocatepe Univ, Fac Technol, Dept Mech Engn, TR-03200 Afyon, Turkey

[4] Duzce Univ, Fac Technol, Dept Mfg Engn, TR-81620 Duzce, Turkey

来源：

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2014年 / 67卷 / 06期

关键词：

Bearing steel; Deep cryogenic treatment; Microstructure; Wear resistance; TRIBOLOGICAL BEHAVIOR; TOOL STEEL; ABRASION RESISTANCE; MICROSTRUCTURE;

D O I：

10.1007/s12666-014-0417-4

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

In this study, the effects of deep cryogenic treatment (DCT) on the wear resistance of AISI 52100 bearing steel were investigated. For this purpose, a number of bearing steel samples were held for different times (12, 24, 36, 48, 60 h) at deep cryogenic temperatures (-145 degrees C). The wear experiments were carried out in a ball-disk arrangement, by applying loads of 10 and 20 N and a sliding velocity of 0.15 m/s. After conducting the experimental studies, 36 h was found to be the optimal holding time. At this holding time, the wear rate and friction coefficient were decreased, while the hardness reached to maximum values. It was observed that DCT led to significant microstructural changes, which resulted in improved tribological properties.

引用

页码：909 / 917

页数：9

共 50 条

[21] Wear and Rolling Contact Fatigue Analysis of AISI 52100 Bearing Steel in Presence of Additivated Lubricants
Bhaumik, Shubrajit
Paleu, Viorel
[J]. METALS, 2021, 11 (06)
[22] Microstructural Evolution and Wear Resistance of Friction Stir-Processed AISI 52100 Steel
Seraj, R. A.
Abdollah-Zadeh, A.
Hajian, M.
Kargar, F.
Soltanalizadeh, R.
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2016, 47A (07): : 3564 - 3572
[23] Microstructural Evolution and Wear Resistance of Friction Stir-Processed AISI 52100 Steel
R. A. Seraj
A. Abdollah-zadeh
M. Hajian
F. Kargar
R. Soltanalizadeh
[J]. Metallurgical and Materials Transactions A, 2016, 47 : 3564 - 3572
[24] Effect of Differential Hardness on Static Load Capacity of AISI 52100 Bearing Steel
Shareef, Iqbal
Brandes, Joshua A.
Zaretsky, Erwin, V
[J]. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2021, 143 (11):
[25] Effect of machining and heating parameters on distortion of AISI 52100 steel bearing rings
Surm, H
Kessler, O
Hoffmann, F
Mayr, P
[J]. INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2005, 24 (1-4): : 270 - 281
[26] Influence of Deep Cryogenic Treatment on the Mechanical Properties of AISI 440C Bearing Steel
Idayan, A.
Gnanavelbabu, A.
Rajkumar, K.
[J]. 12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014), 2014, 97 : 1683 - 1691
[27] Contact size effect on fretting wear behaviour: application to an AISI 52100/AISI 52100 interface
Merhej, R.
Fouvry, S.
[J]. LUBRICATION SCIENCE, 2009, 21 (03) : 83 - 102
[28] The effects of CryoMQL conditions on tool wear and surface integrity in hard turning of AISI 52100 bearing steel
Cetindag, Huseyin Alp
Cicek, Adem
Ucak, Necati
[J]. JOURNAL OF MANUFACTURING PROCESSES, 2020, 56 : 463 - 473
[29] EFFECTS OF VIBRATION CONDITIONS ON MACHINABILITY OF AISI 52100 BEARING STEEL
Agar, Salih
Tosun, Nihat
Mahmat, Aybars
[J]. SURFACE REVIEW AND LETTERS, 2024, 31 (02)
[30] High precision hard turning of AISI 52100 bearing steel
Revel, Philippe
Jouini, Nabil
Thoquenne, Guillaume
Lefebvre, Fabien
[J]. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2016, 43 : 24 - 33

← 1 2 3 4 5 →