Effect of Deep Cryogenic Treatment on Wear Resistance of AISI 52100 Bearing Steel

被引：51

作者：

Gunes, Ibrahim ^{[1
]}

Cicek, Adem ^{[2
]}

Aslantas, Kubilay ^{[3
]}

Kara, Fuat ^{[4
]}

机构：

[1] Afyon Kocatepe Univ, Fac Technol Met & Mat Engn, TR-03200 Afyon, Turkey

[2] Yildirim Beyazit Univ, Dept Mech Engn, TR-06520 Ankara, Turkey

[3] Afyon Kocatepe Univ, Fac Technol, Dept Mech Engn, TR-03200 Afyon, Turkey

[4] Duzce Univ, Fac Technol, Dept Mfg Engn, TR-81620 Duzce, Turkey

来源：

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2014年 / 67卷 / 06期

关键词：

Bearing steel; Deep cryogenic treatment; Microstructure; Wear resistance; TRIBOLOGICAL BEHAVIOR; TOOL STEEL; ABRASION RESISTANCE; MICROSTRUCTURE;

D O I：

10.1007/s12666-014-0417-4

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

In this study, the effects of deep cryogenic treatment (DCT) on the wear resistance of AISI 52100 bearing steel were investigated. For this purpose, a number of bearing steel samples were held for different times (12, 24, 36, 48, 60 h) at deep cryogenic temperatures (-145 degrees C). The wear experiments were carried out in a ball-disk arrangement, by applying loads of 10 and 20 N and a sliding velocity of 0.15 m/s. After conducting the experimental studies, 36 h was found to be the optimal holding time. At this holding time, the wear rate and friction coefficient were decreased, while the hardness reached to maximum values. It was observed that DCT led to significant microstructural changes, which resulted in improved tribological properties.

引用

页码：909 / 917

页数：9

共 50 条

[1] Effect of Deep Cryogenic Treatment on Wear Resistance of AISI 52100 Bearing Steel
Ibrahim Gunes
Adem Cicek
Kubilay Aslantas
Fuat Kara
[J]. Transactions of the Indian Institute of Metals, 2014, 67 : 909 - 917
[2] The effect of the cryogenic treatment on the machinability of hardened AISI 52100 bearing steel
Moreira, J. C.
Avila, R. F.
Godoy, G. C. D.
Abrao, A. M.
[J]. MATERIA-RIO DE JANEIRO, 2009, 14 (03): : 932 - 945
[3] Influence of the Deep Cryogenic Treatment on AISI 52100 and AISI D3 Steel's Corrosion Resistance
Jovicevic-Klug, Patricia
Kranjec, Tjasa
Jovicevic-Klug, Matic
Kosec, Tadeja
Podgornik, Bojan
[J]. MATERIALS, 2021, 14 (21)
[4] Effect of Magnetic Field Coupled Deep Cryogenic Treatment on Wear Resistance of AISI 4140 Steel
Tang, Liang
Yan, Xianguo
Jiang, Yijiang
Li, Fan
Zhang, Haidong
[J]. ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2020, 2020
[5] Grain size effect on wear resistance of a nanostructured AISI52100 steel
Zhou, L.
Liu, G.
Han, Z.
Lu, K.
[J]. SCRIPTA MATERIALIA, 2008, 58 (06) : 445 - 448
[6] Wear and corrosion of niobium carbide coated AISI 52100 bearing steel
Fernandes, F. A. P.
Gallego, J.
Picon, C. A.
Tremiliosi Filho, G.
Casteletti, L. C.
[J]. SURFACE & COATINGS TECHNOLOGY, 2015, 279 : 112 - 117
[7] Effect of Deep Cryogenic Treatment on the Microstructure and Wear Resistance of a Novel Nanobainite Steel
Fan, Shichao
Hao, Hai
Zhang, Xingguo
[J]. STEEL RESEARCH INTERNATIONAL, 2021, 92 (05)
[8] Effect of Magnetic Field Coupled Deep Cryogenic Treatment on Wear Resistance of AISI 4140 Steel (vol 2020, 2589283, 2020)
Tang, Liang
Yan, Xianguo
Jiang, Yijiang
Li, Fan
Zhang, Haidong
[J]. ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2021, 2021
[9] Cryogenic machining as an alternative turning process of normalized and hardened AISI 52100 bearing steel
Bicek, M.
Dumont, F.
Courbon, C.
Pusavec, F.
Rech, J.
Kopac, J.
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2012, 212 (12) : 2609 - 2618
[10] Effect of ammonia addition on microstructure and wear performance of carbonitrided high carbon bearing steel AISI 52100
Liu, Bin
Wang, Bo
Gu, Jianfeng
[J]. SURFACE & COATINGS TECHNOLOGY, 2019, 361 : 112 - 118

← 1 2 3 4 5 →