Finite Element Simulation of Nickel-Based Alloy Cutting Process based on DEFORM-3D

被引：1

作者：

Ren, Jialong ^{[1
]}

Zhang, Chunyan ^{[1
]}

Yuan, Depeng ^{[1
]}

机构：

[1] Jiangsu Univ Sci & Technogoly, Zhenjiang 212013, Peoples R China

来源：

APPLICATION OF DIAMOND AND RELATED MATERIALS | 2011年 / 175卷

关键词：

Nickel based alloy; Cutting force; Cutting temperature; Finite element model; Heat transfer coefficient;

D O I：

10.4028/www.scientific.net/SSP.175.352

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

To analysis cutting mechanism and heat transfer coefficient of Ni-based superalloy IN718, this paper introduced a three-dimensional finite element model for cutting process based on DEFORM-3D V6.1, and cutting force Fy and cutting temperature T under different feed rate f, cutting speed v and back engagement a(p) were obtained. The temperature variation during cutting process under different cooling method was analyzed. The simulation results indicate that the influence of back engagement a(p) on the cutting force Fy is the greatest, while that of cutting speed v is minor; and for cutting temperature T, influence of cutting speed v is the greatest, while that of back engagement a(p) is minor. Influence of heat transfer coefficient on highest temperature and average cutting force Fy is minor, but its influence on average temperature is quite obvious. Greater heat transfer coefficient is less average temperature.

引用

页码：352 / 356

页数：5

共 50 条

[41] The FEM Simulation on End Mill of Plastic Doors and Windows Corner Cleaning Based on Deform-3D
Li, Guoping
Huang, Zhenyong
Wang, Xiaohui
4TH INTERNATIONAL CONFERENCE ON MECHANICAL, MATERIALS AND MANUFACTURING (ICMMM 2017), 2017, 272
[42] Numerical Simulation of Creep-Fatigue Crack Growth for Nickel-Based Super Alloy with Extended Finite Element Method
Zhang, Guobin
Yuan, Huang
ADVANCED RESEARCH ON INTELLIGENT MATERIALS AND MECHANICAL ENGINEERING, 2011, 321 : 171 - +
[43] Designing hot working processes of nickel-based superalloys using finite element simulation
Kopp, R
Tschirnich, M
Wolske, M
Klöwer, J
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2002, 124 (04): : 931 - 935
[44] Simulation of Mechanical and Thermal Loads and Microtexturing of Ceramic Cutting Inserts in Turning a Nickel-Based Alloy
Volosova, Marina A.
Okunkova, Anna A.
Hamdy, Khaled
Malakhinsky, Alexander P.
Gkhashim, Khasan I.
METALS, 2023, 13 (07)
[45] Finite element process modelling of inertia friction welding advanced nickel-based superalloy
Grant, B.
Preuss, M.
Withers, P. J.
Baxter, G.
Rowlson, M.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 513-14 : 366 - 375
[46] Simulation of dynamic recrystallization for 7050 aluminium alloy on platform of DEFORM-3D using cellular automaton
Yi, You-Ping
Liu, Chao
Huang, Shi-Quan
Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2010, 41 (05): : 1814 - 1820
[47] FINITE ELEMENT SIMULATION OF Ti-6Al-4V BILLET ON OPEN DIE FORGING PROCESS UNDER DIFFERENT TEMPERATURES USING DEFORM-3D
Rajesh, K. V. Durga
Buddi, Tanya
Mishra, Himanshu
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2022, 8 (02) : 1963 - 1972
[48] Finite element simulation and microstructure analysis of nickel based alloy for additive manufacturing
Liu Heping
Sun Fenger
Gao Yibo
Cheng Shaolei
Liu Bin
INTERNATIONAL CONFERENCE ON ADVANCED FUNCTIONAL MATERIALS AND COMPOSITES (ICAFMC2018), 2018, 242
[49] Optimization Design of Forging Die for Supporting Bar Based on DEFORM-3D
Fu Lei
Lin Li
PROGRESS IN MATERIALS AND PROCESSES, PTS 1-3, 2013, 602-604 : 1869 - 1873
[50] Experimental and Finite Element Investigations on The Influence of Tool Edge Radius in Machining Nickel-Based Alloy
Oezel, Tugrul
PROCEEDINGS OF THE ASME INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, VOL 1, 2009, : 493 - 498

← 1 2 3 4 5 →