Morphology Development in the Gate Region of Microinjection-Molded Thermoplastics

被引：17

作者：

Chu, Jing-Song ^{[1
,2
,3
]}

Kamal, Musa R. ^{[1
,2
]}

Derdouri, Abdessalem ^{[4
]}

Hrymak, Andy ^{[5
]}

机构：

[1] McGill Univ, Dept Chem Engn, Montreal, PQ, Canada

[2] McGill Univ, CREPEC, Montreal, PQ, Canada

[3] Micromolding Solut, Boucherville, PQ, Canada

[4] Natl Res Council Canada, Inst Ind Mat, Boucherville, PQ, Canada

[5] McMaster Univ, Dept Chem Engn, Hamilton, ON L8S 4L7, Canada

来源：

POLYMER ENGINEERING AND SCIENCE | 2012年 / 52卷 / 04期

关键词：

OFF TIME; INJECTION; POLYPROPYLENE; POLYETHYLENE; ORIENTATION; FLOW;

D O I：

10.1002/pen.22143

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

The melt experiences extremely high shear rates as it travels through the very small gate, in the microinjection molding process. The combination of the high shear rates, extensive viscous heating, and the large thermal gradients has a profound influence on the characteristics of the moldings. However, many of these interactions are not clearly understood. In this study, the morphology of moldings in the gate region was observed using a polarized light microscope. Moreover, the specimens from different regions of micromoldings were analyzed using a differential scanning calorimeter (DSC). Two materials were selected for the study: polyoxymethylene (POM) and high-density polyethylene. Three special morphological features were observed in the gate region for POM but not for polyethylene. The results obtained using the DSC were explained in light of the microstructural features observed using polarized light microscopy. POLYM. ENG. SCI., 52:787-794, 2011. (C) 2011 Society of Plastics Engineers

引用

页码：787 / 794

页数：8

共 49 条

[31] Development of robust AFM technique for roughness and morphology characterization of gate stack thin films
Wang, CC
Ye, P
Li, F
Ma, Y
Uritsky, YS
CHARACTERIZATION AND METROLOGY FOR ULSI TECHNOLOGY 2005, 2005, 788 : 194 - 199
[32] Development of morphology and properties of injection-molded bars of HDPE/PA6 blends along flow direction
Li, Jiang
Yu, Xiaofeng
Guo, Shaoyun
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 2007, 45 (02) : 184 - 195
[33] Morphology of crater and caldera lakes in the Far Eastern region of Russia and the features of their development
Dmitrii N.KOZLOV
Ekaterina V.LEBEDEVA
Journal of Mountain Science, 2024, 21 (04) : 1246 - 1258
[34] Morphology of crater and caldera lakes in the Far Eastern region of Russia and the features of their development
Kozlov, Dmitrii N.
Lebedeva, Ekaterina V.
JOURNAL OF MOUNTAIN SCIENCE, 2024, 21 (04) : 1246 - 1258
[35] MORPHOLOGY AND DEVELOPMENT OF AN ALLUVIAL-FAN IN A PERMAFROST REGION, AKLAVIK RANGE, CANADA
CATTO, NR
GEOGRAFISKA ANNALER SERIES A-PHYSICAL GEOGRAPHY, 1993, 75 (03) : 83 - 93
[36] EFFECT OF PROCESSING CONDITIONS ON THE STRUCTURE DEVELOPMENT IN THE WELDING REGION OF INJECTION-MOLDED POLY(ARYLENE ETHER KETONE) .3.
ULCER, Y
CAKMAK, M
HSIUNG, CM
JOURNAL OF APPLIED POLYMER SCIENCE, 1995, 55 (08) : 1241 - 1263
[37] THE NEONATAL PORCINE LUNG - ULTRASTRUCTURAL MORPHOLOGY AND POSTNATAL-DEVELOPMENT OF THE TERMINAL AIRWAYS AND ALVEOLAR REGION
WINKLER, GC
CHEVILLE, NF
ANATOMICAL RECORD, 1984, 210 (02): : 303 - 313
[38] Effect of tillage on runoff and sediment yields and morphology development characteristic of ephemeral gully in loessial region
Guo, Mingming
Wang, Wenlong
Li, Jianming
Zhu, Baocai
Shi, Qianhua
Kang, Hongliang
Li, Yanfu
Li, Yaolin
Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering, 2015, 31 (15): : 114 - 123
[39] Dynamic Monitoring of Ephemeral Gully Development and Its Morphology Quantification in Loess Hilly-gully Region
Xu X.
Zheng F.
Qin C.
Han Y.
Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2019, 50 (04): : 274 - 282
[40] Urban morphology and urban fragmentation in Macau, China: island city development in the Pearl River Delta megacity region
Sheng, Ni
Tang, U. Wa
Grydehoj, Adam
ISLAND STUDIES JOURNAL, 2017, 12 (02): : 199 - 212

← 1 2 3 4 5 →